Having problems with your Olympus Evolt E510 Digital Camera ?

I have a Blank LCD screen and everything else seems to function fine

\015 I have an Olympus e510 SLR and when i last turned it on the lcd screen remains blank with a few grainy grey lines running through it. i cannot see saved photos either when i switch to play mode. i can still take pics, but obviously have to wait until i transfer to pc to see them.\015\012anyone got any help or is the LCD in need of repair?\015\012thanks\015

Answers :

The problem you are describing is a problem with one of the chips in the camera that controls image processing. It seems to have failed and needs to be replaced. Following are the instructions to send your camera to Olympus for service.
\015\012Olympus will charge a flat rate repair fee for this product if beyond the one year factory warranty or the warranty is voided. The cost is $139.85 plus your local sales tax. This covers parts and labor, factory cleaning and diagnostic check, 6 month warranty and the cost of shipping the product back to you is all included in that price.
Repair Help & Product Troubleshooting for Olympus Evolt E510 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Blank LCD screen and everything else seems to function fine

The problem you are describing is a problem with one of the chips in the camera that controls image processing. It seems to have failed and needs to be replaced. Following are the instructions to send your camera to Olympus for service.\015\0 ... Olympus Evolt E510 Digital Camera

Kodak easyshare v1003 lcd screen is blank. all other functions seem to be working fine. lcd is blank

Hello Tina, This is not your day ! sounds like LCD failure. ... Kodak EasyShare V1003 Digital Camera

White screen. Hi, its a month old, panasonic tz3. i dropped it last week. Now it just shows a blank white screen on the Lcd, and even the snaps clicked are blank white. Though the earlier snaps can still be viewed on the LCD. the lens assembly seems to be fine, i.e its moving alright when i try to zoom it.

You may want to ask a guy in South Carolina that has all the used parts for your TZ3. I think his email is [email protected] ... Panasonic Lumix DMC-TZ3 Digital Camera

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!

You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera

LCD Screen My camera was fine yesterday. Today the screen is bright purple/pink, the images are blurry and trembling even though the camera is still. The camera hasn't been dropped or harmed at all. What could this be? Same problem- pink screen- everrything else seems to work fine

May i please know the model and the make of the product in details so that it can help me resolving the issue is a more prompt manner ... Fuji FinePix V10 Digital Camera

Screen blank? Everything else is fine but the screen is blank? When I now take a photo it is also black?

It seems to be a problem in  defective CCD imager.  Canon should fix this problem for you with no cost..\015\012 This is regardless of your camera's warranty status. check out these links.. it will be useful.. ... Canon PowerShot SD100 / IXUS II Digital Camera

Hi, I have a Canon T2i Rebel. When i put the camera in "M" (totally manual), the image doesnt appear in the LCD screen. Everything else works fine in the monitor, but it is as if the lens where covered with the cap. But it´s not, and acutally all the other modes work fine. Only in the manual mode the image doesnt show, and the pictures also appear completely black. The menu shows sometimes something as if the exposure were less than -2, but even though i change the values for everything hig

That's great news, so let's write it up as a solution so that other people who search on here find the right information!So it appears that the Canon T2i when in manual mode (M) remembers whatever settings you play with, and that these se ... Canon EOS 550D Rebel T2i Digital Camera

I have a nikon coolpix L10. everything seems to work except the lcd screen. It is blank. Nothing happens. Power comes on and all other things make the sound of working properly but cannot see anything on the lcd screen

... Nikon COOLPIX L10 Digital Camera

Blank photos Everything functions well, except the fact that there is no image on the LCD, nor any image is taken after shooting! It happens randomly - several photos are taken fully functional, with the preview on the camera and suddenly it disappears showing only blank white screen!

This is a CCD sensor problem ( see enclosed image of one taken out of a Cannon camera with similar specs to yours ). Contact Fuji agent as this is repaired under warranty . ... Fuji FinePix S5000 Digital Camera

Broken screen where do u get a broken screen fixed I have a Nikon Coolpix s1 digital camera and it fell into a cup of coffee. I unscrewed it and cleaned off the coffee but in the process, when I was screwing it back together I put pressure on the screen and now it is broken. Everything else seemes to work fine, any suggestions? I am at a loss. Many thanks. Katy.

Try to find a person to fix it ... Nikon Coolpix S1 Digital Camera

My sony dsc-w1 got very wet, caught in a rainstorm and did not have the case. I have left it dry out for 4 days and it turns on, lcd works, can read memory stick and display old pictures on the lcd. But when I try to take a picture the lcd displays a black a screen and the picture that it takes is just a black box, flash illlumintor everything else seems to work, except the ability to take a picture, lens moves in and out, but picture is always black, any idea, is the ccd shot

Maybe the shutter got wet and sticky. You can try look into the lens then press shutter button to take picture. If you don’t see the movement inside the hole, the shutter doesn’t open, it will take black picture. ... Sony Cyber-Shot DSC-W1 Digital Camera

My LCD screen has cracked and doesn't display anything. Everything else works fine, so I am thinking a replacement screen is all it needs. They are available on ebay, but can anyone assist with how to remove the old screen to replace it?

You can buy it with great price as following address : \015\012\015\012http://www.thi ... Casio EX-Z1050 Digital Camera

I replaced the lcd display screen with a new one ordered on an internet site. When the camera is powered on, all I Get is a white screen. All other functions seem to work normally. Do you think I got a bad replacement screen, or is there something else wrong with the camera ??

You might have mde mistake,while attachment.of lcd unt to the mother board ... Olympus FE-360 Digital Camera

Need help urgently!!! GR-D22 not recording. I have a JVC GR-D22 Digital Video Camera (about 3 yr. old). It had been working fine. But recently it did not work anymore. The LCD screen is on, but a black picture. When you first turn it on, the reminder to remove the lens cap flashes (lens cap is off). Then that will go away and still no picture. All the dates and everything else is showing up on the screen but no picture. I have tried to adujust it according the guide but no help. Same thing i

There is a good chance that the iris is stuck shut. Try tapping the side of the camera lightly to try and release it. If the camera can show you old pictures that are currently stored correctly, I would suspect the iris.\015\012\015\012 ... JVC Digital Cameras

When i turn my camera (cannon powershot SD1100 IS) on the screen is black like it can not see through the lens. I can still see all of the menu options on the screen. If I try to take a picture it will still take a picture and the picture shows up just like it is supposed to. I can still review the pictures on the camera. Everything else seems to be working fine.

This could be a firmware problem.First, check your screen settings, should be in the setup menu. You may have the screen switched off, often used as a power save option.Secondly, if its still under warranty, go back to the ven ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Hello - My Olympus SP-550OUZ Camera was in a rucksack which slid of my shoulder and hit the ground. Although there is no obvious damage to it, nothing cracked, no marks etc., it has stopped seeing properly. Pictures already taken can still be viewed either in the viewfinder or the screen both work perfectly. The lens moves in and out not problem everything seems to work fine except when you look to take a picture either by viewfinder or the lcd screen all it sees is a blurry hazy purple pictu

... Digital Cameras

I have a nikon d200. The last time I used it (only a few days ago) it was fine, everything normal. Then yesterday I pull out out of the case and everything seems to be going wrong. It is metering INSANELY low, like a shutter speed of 100 in full daylight produces a REALLY dark image. It won't auto focus at all, and i am unable to change the fstop in manual or aperture priority modes. I tried to restore it to factory settings and the lcd screen flashed to indicate it had been restored but no luck

Your boyfriend is probably right, and it makes sense, if you can't change the f-stops. \015\012The following blog on Flickr might help you:\015\012 ... Nikon D200 Body Only Digital Camera

My cannon mvx200i won't accept the tapes any more. There is a red symbol of a tape flashing on the screen. it was working fine, everything else seemed to be working fine, I took one tape out and from there it wouldn't accept the tapes. What is the problem?

Hi, First off how long have you owned the camera? I would suggest you contact canon and have the camera serviced. There is most likely a broken/defective part in the camera. Follow this link to find the nearest service center. I am assuming you ... Digital Cameras

I cannot take clear pictures but everything else seems fine

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot SD100 / IXUS II Digital Camera

Blank Screen Well my cameras screen is blank when i try to take pictures it doesnt work all of it is blank it take pictures but when i look at the pictures all of it is blank i love my camera but i dont know what to do i need help...and fast!! The shutter works fine..everything works fine but i dont know what up wit my screen i need help please somebody help me!!

Ok casio luver you have eather a broke lcd or a damaged main board. visit www.digitalcamrepair.com for more help. ... Casio EXILIM ZOOM EX-Z60 Digital Camera

Camera turns on, lens goes out, but it is black, see nothing through it or on lcd screen (yes, cover is off). There is no error messages, still takes pictures but just black. Can view previous pictures on SD card but when move over to camera mode it is just black, everything else seems to be working.

It coud be a very common IRIS/Shutter stuck problem...this has been reported on lot of S3 IS & S2 IS cameras... just search for this on web and you'll find a temporary solution also (related to taking battery out in the middle of taking picture d ... Canon PowerShot S3 IS Digital Camera

No image output on screen? everything else seems to be fine? Canon IXUS 430 serial nr. 8637511150. Thank you. Pine Pienaar

It seems you have turned off the screen display.all you need to do is click on the "Disp" button and the image will come up. ... Canon PowerShot S410 / IXUS 430 Digital Camera

Focus error? The camera won't focus. Focus Error is displayed in the viewing screen. Zoom action & everything else seems to work fine. Won't focus, won't take pictures.

This is a known issue with Fuji S3000 cameras caused by dust and dirt that get in through the loosely mounted lens mechanism, there are only three solutions.\012\012If under warranty you can send the camera in for rep ... Fuji FinePix S3000 Digital Camera

Has stopped taking pictures. It will focus and act like it is ready to shoot, but with or without the flash, does not photograph. Everything else seems to be working fine, screen, modes, power, zoom... just won't shoot.

Sounds like the tip of the shutter release button has worn off. It's merely a tiny plastic nib that breaks off quite easily and commonly. Replacement of the shutter button is relatively easy. ... Canon PowerShot A510 Digital Camera

How much? dear ktpier .... so, how much are you selling it for? since you seem to be the expert on the Dimage Z1, my view-finder is not turning on ... everything else works fine as I can still use the LCD display, but any idea what can be wrong? 8-)

Please use my real email account to deal with buying my battery door. $10 or for $25 I'll install it for you. keithtracypierceATcomcast.net\015\012\015\012I am no expert at all, and the only camera I took apart was a Z3, which I did onl ... Konica Minolta DiMAGE Z1 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2753 seconds