Having problems with your Olympus EVOLT E-500 Digital Camera ?

How do I reset my camera to its factory settings? all my pictures are blue.

Answers :

Go into the camera setting and find "reset to default" and select yes.
Make sure you have good batteries too.
This is supposed to work:


1. Select P on the mode dial.

2. Open the card door and turn on the camera.

3. Hold down the Menu and the OK buttons at the same time for 5 seconds.

4. Olympus E-xxx is displayed.

5. Release and again hold down the Menu and the OK buttons at the same time for another 5 seconds.

6. Reset has been done is displayed

7. Press the OK button.

8. Shut the camera off
Repair Help & Product Troubleshooting for Olympus EVOLT E-500 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I reset my camera to its factory settings? all my pictures are blue.

Go into the camera setting and find "reset to default" and select yes.Make sure you have good batteries too. ... Olympus EVOLT E-500 Digital Camera

Yashica ez digital 6032- 6 mp camera.. i got one sparingly used yashica camera... with above spec... which shows trouble when taking stil pictures outdoors... indoor pictures and video indoors n outdoors are fine. but when taking stills outdoor mainly in daylight condtions... resulting pic is over exposed and blured...with white light...i tried adjsting the setting and i have reseted to factory settings... but the same problem remains...pls help me

Yashica ez digital 6032video indoors n outdoors are fine.but when taking stills outdoor mainly in daylight condtions...resulting pic is over exposed and blured...with white light...i triedadjst ... Digital Cameras

My polariod t1035 camera has fully charged battery, reset to factory settings, and reformatted memory. but when i turn on the camera, the screen is just black, no picture, except when i look at the pictures on the camera. i have taken a picture, and it comes out just black. please help.

Unfortunately this faulty cant yoou fix it alone...why this is a ccd crash the ccd is faulty...you must change the ccd or the entire lens block... you must now see if you have convenience to adjust the camera, why it s possible that the fixing cost ... Polaroid i1035 Digital Camera

I used to be able to take 1000+ pictures on external memory card. Now I'm trying to take pictures and it will only allow me to take 9 pictures but on the camera memory. I have reset the camera to factory settings and also purchased and inserted a new external memory card and I cant to taking pictures via the external memory card. Do you have any suggestions??

With no card in the camera, go into the menu and find "format"...follow the on-screen instructions to erase the internal memory. Then, insert your card and do the format thing again (This will erase your card so if there are pictures on it, download ... Olympus SP-565 UZ Digital Camera

Over exposure The exposure settings on the camera have suddenly become fixed - I can't change them either through fixing shutter speed, OEV, or any other settings. Even tried a factory reset by selecting 'initialize' from the menu, but the problem persists. High or low exposure settings are visible on the viewfinder (i.e. changing the settings shows the picture getting darker or lighter on the screen), but once the picture is shot, it's fixed at an overexposed state.

... Sony Cyber-Shot DSC-HX7V Digital Camera

The LCD went black, all the icons are showed, but no pictures. Any taken pictures are also black! Already reset the camera in factory settings, didn't help... anyone???

Unfortunately, I have the exact same problem and just got off the phone with Canon (1-800-828-4040 for tech support). According to their reps the S3IS is not on the list for replacement and I was quoted a min. fix price of $150.00. ... Canon PowerShot S3 IS Digital Camera

I'm not sure what is relevant and what isn't but... Two days ago I tried taking a picture on my timer and all of them came out blurry. I wasn't sure why this was so I started poking around on the camera and decided to reset all factory settings. Then that evening I tried to upload my pictures to my computer as usual. The software (Picasa) locked up. I tried taking the camera out of the cradle and turning it on but it wouldn't turn on. I rebooted my computer and tried turing the camera on

Sometimes a camera software upgrade will help, but it is hard to find software online. I first would look on manufacture's website to see if there is any driver updates you can download to your pc, then do the same with picasa software. Also make sur ... Digital Cameras

I am trying to get my camera back to the factory settings but everytime i go menucardset then go tocustom reset setting it jumps over it and goes straight to picture mode. I cannot get it to highlight custom reset setting.

There may be another "reset" in the menu that will do what you want. Search for it. ... Olympus EVOLT E-500 Digital Camera

I have a Fuji FinePix S5100 that used to take great pictures. Now, all pictures are out of focus, including macro, regular and telephoto. I have tried using a tripod and not using a tripod. There is no difference. I have reset the camera to the factory settings and cleaned the lens. Nothing helps.

The problem here is the tiny motor that focuses the lens is not working,( this is a common failure on all digital camer's) the focus movement is inside the camera not anything u can see, it moves the internal elements ... Fuji Digital Cameras

How do I reset the factory settings on my Polaroid i830 Digital Camera? I keep getting errors "hands with exclaimation points" & "ISO 50" popping up and the pictures are terrible. I have children who have played around with the settings.

... Polaroid i830 Digital Camera

When I take a picture with the flash the picture actually turns out so dark you can not view it. Is there a hard reset to set the camera back to factory default

Google it to find out. Also check Canon's website to find out if there is a firmware flash/update for you camera. Usually those reprogram updates fixes most most problems. Good luck. ... Canon PowerShot A640 Digital Camera

My Pentax Optio A20 camera display doesn't show true colors, they now have a red-orange tint. It was dropped on the grass yesterday. When I play back the pictures, all of them show up as red-orange on the display, the ones I took before it was dropped and after it was dropped. Everything else works fine on the camera. My brother-in-law says that there may be a reset button to restore factory settings.

It sounds like you may have a broken display. It is possible that it is the main board, but much more likely that it is the LCD display. I can fix this for $40, not matter if it is the display, or the main board. Or you can send it to Pentax in A ... Pentax Optio A20 Digital Camera

When I take pictures my pictures come out fuzzy and I reset the camera back to the factory settings.

... Digital Cameras

I have new Nikon D90 with 18-105 Nikon lens. The only problem with the camera, when shooting potraits in dim light without flash, the pictures get black artefacts throughout the faces and skins. I used different lenses and reset the camera setting to the factory original, but no help. Thank you for solving the problem... Hamid Jakarta, Indonesia

This has nothing to do with the camera, but instead it has to do with the lens you are using. The standard lens you are using has an aperture of f/4.5 which is common across many lenses. If you wish to shoot in low light you need a lower "f-stop". ... Nikon D90 Digital Camera with 18-105mm lens

When I press the shutter button to capture a picture there is a flashing hand and an exclamation mark within a box. I cannot figure out how to adjust the settings correctly. How can I reset this camera or what are the factory settings suppose to be?

If you haven't a manual get onto the Sony site and try to find one there. You might strike lucky. ... Sony Cyber-shot DSC-H50 Digital Camera

SONY DSC-W100 1)I need to reset all default setting on my camera.Is there a reset button on this camera? 2)I have trouble taking pictures at a night baseball game.What is the best setting for this camera?Thats why I messed up all the setting cause I played with all the settings and I could never get a good picture all night.Thanks

It can be possible to select reset icon by selecting menu option.  \015\012it is not possible to take this type of pictures because at auto flash mode the subject can't be covered witin flash range .therefore picture may und ... Sony Cyber-shot DSC-W100 Digital Camera

The camera is 2 years old, when turning on the power it goes to the date set,you can change the year, then it slides over to the month, but seems froze up, then the camera resets itself, if you skip the date set up, it shows a view on the lcd, but can't take a picture, and the camera resets again. My son borrowed it and took pictures snorkeling, so it may have gotten wet, but the lcd screen is not distorted as it was a year ago when I got water in it.

... Olympus Stylus 770 SW Digital Camera

FLASHES C:13:01 When I turned the camera on, I looked at monitor to take picture and was flashing C:13:01-wouldn't take a picture. Shut camera off, turned on and got two pictures off. That was it. By shutting camera off and on was able to get to the review setting and viewed the 80 pics. stored; that was yesterday. Today I get the c:13:01 code on each camera mode and review setting only shows the 2 pics from yesterday, then blue screen, though as I push the review button the on screen picture nu

OMG!!! If you still have the camera, try this. I read in one of these forums to spray a burst of brake cleaner in there and blow dry for a few seconds and believe it or not, it worked! That's after me taking it apart to make sure the connectors weren ... Sony Cyber-Shot DSC-P200 Digital Camera

Blue Hue I have 2 A345 cameras. One is continually taking pictures with a very blue hue to them, useless as a photo, whilst the other camera with same settings takes great pictures. This happens whether indoors or outdoors in a good light. The camera has been back under warranty with no fault found. If I have pictures like this, how can it be no fault found. To demonstrate exactly the blue hue go to web page http://1sourpuss.blogspot.com/2007/05/hoses-trucks-muscles-oh-my.html It is exactly like

Make sure your White Balance is set to Auto! ... Fuji FinePix A345 Digital Camera

Nikon E5700 digital camara. Camara turns on, everything looks good, shutter opens but only see black through the view finder, monitor and will only take black pictures. I reset camera to factory settings, the battery is charged--don't know what else to try. Everything worked fine last week.

There is a service advisory out for Nikon E5700.t has come to our attention that in a\015\012limited number of COOLPIX 3100, 3500, 4500, 5000, 5400, 5700 and SQ\015\012digital cameras, an electronic component may, in some instances, fail\ ... Nikon Coolpix 5700 Digital Camera

After dropping the camera, all pictures show purple glow where white is supposed to be. Sometimes it returns to normal when using the zoom. I tried resetting to factory settings, but to no avail, the very bright purple color stays. (in lcd and in end result on sd card.)

Http://www.usa.canon.com/cusa/support/consumer/digital_cameras/other_powershot/powershot_sx2 ... Canon PowerShot SX 200 IS Digital Camera

I did not use my camera for 3 months when i get it to use the picture is blurd. even the screen is not ok there is like fire. i tried to format and reset the factory setting but still doesn't work.

Hi,I\015\012 am sorry to hear regarding the trouble. This is a common problem on \015\012these models. It is either a faulty CCD sensor or LCD panel. If this is a\015\012 problem while taking new images,however old images are still ... Olympus Stylus 820 Digital Camera

I have a new (3 weeks) D700 and while taking photos yesterday with camera and a 16-35mm lens, the exposure meter went ape. Pictures taken ok but ERR started to flash where shutter speed reading should be displayed in viewfinder. Tried everything, including resetting to factory settings, detaching and reattaching lens, checking switches, and then went home in despair. At home I switched to a 50mm lens and the problem disappeared. I put the 16-35mm lens back and problem seemed to have disappeared.

... Nikon Digital Cameras

I need to know how to reset the resolution setting on my Fujifilm Digital Camera FinePix S5700/FinePix S700? Can you help me get the best quality? It isn't blurry, but I think it could be better. Maybe, I can't get any better than the settings I have already. What should my settings be to get the best quality pictures from this camera? Can anyone tell me, Please? Thank You, Vickie My pictures look perfect in the view finder, but come out on the computer as grainy.....also, my S setting does not

You can try checking the user manual for those settings this is the link for that http://www.fujifilm.com/products/digital_ ... Fuji FinePix S5700 Digital Camera

I think i have set something wrong on my camera and i would like to know if there is a way to set it back to factory settings versus going thru each option individually. The pictures are darker than i like even when using the flash. And outside pictures do not have the illustrious color they used to have. My camera is a fuji s5100. Thank you.

Go into the menu and find "reset"...follow the on-screen instructions. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 1.8970 seconds