Having problems with your Olympus FE-100 Digital Camera ?
No display and not responding to switch on - off
Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wipe the camera contacts firmly with\015\012a dry cloth (heavy corrosion may require cleaning with a wire brush,\015\012steel wool, or sandpaper). Remove any residue that may have fallen\015\012into the battery compartment during cleaning, then wipe both ends of\015\012the batteries and place them back in the camera. This cleaning clears\015\012the problem about 90% of the time. If it doesn't work for you, your batteries may need to be replaced, or the camera may have\015\012a problem that requires professional repair.
Repair Help & Product Troubleshooting for Olympus FE-100 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Gateway DC-40. I attempted to format a new 4GB compact flash card. I guess I must have done something wrong. I now have no monitor LCD display, the camera will respond to the on/off switch and the lens will extend. But, the camera will not respond to any of the other switches.In the LCD panel indicator display have an L in the upper lefthand corner and in the upper RH corner I have the auto flash and red eye reduction icons. I had installed the CF card the day before and everthing was fine excep
Hi,Remove the Card and see, if that would help the situation. Update the Firmware, if available.Let me know the progress, so we could proceed.Hope i helped you.Thanks for using ' Fixya ' and have a nice ... Gateway DC-M40 Digital Camera
My NewBrand FLIP MINO HD2 once switched on and after having pushed red button ( recording ) is now blocked ! No responding to any command or doing any action ( no recording, no display, red light rechargin battery always on, no chance to switch off the device ! HELP ME PLEASE
Return it for a refund! i bought one, it did the same as yours. i \015\012returned it and bought the 2nd one. It did the same as the first one \015\012(and the same as yours.)It is a piece of junk. Supposedly the \015\012previous Flip ... Pure Digital Flip Mino Digital Camera
EX-Z40 camera is not responding to commands except ON, PLAY, ZOOM and RECORD. There is a strange but permanent pattern on monitor screen when camera is switched off which brightens when camera is switched on. MENU, DISPLAY etc have no effect. Zoom and flash function as does charger.
Did you change sd's ? Make sure they are Sandisc, Toshiba or Panasonic. ... Digital Cameras
No display and not responding to switch on - off
Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: r ... Olympus FE-100 Digital Camera
Hi, My pentax optio WP don't work anymore. When i switch it on, it stops after 5 seconds. If i start it in read mode (blue button pressed whil i switch it on), it works, but the menu button dont't work and displays a yellow lock on the top of the screen. If i switch it on with the menu btton pressed, it displays ver 1.00 before to stop after 5 seconds If i switch it on with the menu and the blue btton pressed, it displays ver 36, then xxx test xxx and v 866-76 , 1.0001 before to stop after 5 sec
Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.If this is not the issue, please describe specifically which buttons are not workin. ... Pentax Digital Cameras
My new Samsung WB650 camera has just frozen, whilst I was reviewing the various functions. It won't respond to any of the controls, and won't even switch off. If I remove and replace the battery it has no effect. If I then switch it on the 'on' light comes on, but it still wont respond or switch off. Can you let me know what has happened and if there is way to restore normal function?
Thank you TY Price. Solution no.1 worked for me....Really pleased ... Samsung WB650 Digital Camera
I am looking to buy a olympus m9010 camera. When you switch on the camera the date and time settings appear. If i don't set it, it will appear every time i switch the camera on. So i wanted to know if i set the date, time, year settings will that display when i transfer to my pc and when printing or it displays only on my camera LCD. i have this doubt because whatever is displayed in lcd will be the same when you transfer to PC. Hence please clarify. It will be better if you answer to the modeln
... Olympus Digital Cameras
Sony cyber-shot 7.2/display screen is black and won't take new pictures. when switched on the display says turn the power off and on again. But when I switch it back on again the zoom lens goes in & out 4 times & then the display just show the same again.
CCD Failure!known problem contact sony for free repairs dont worry just call them they will do it even if u are out of warranty see this for sample advisory and problem detail ... Sony Cyber-shot DSC-W70 Digital Camera
When I switch the camera on power LED comes on but camera does not power up and if you flip out the display it then switches off and won't powerup whilst the display is out.
Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into ... Canon PowerShot A640 Digital Camera
Canon eos 450d. When switched on, the display does not show ie shutter speed, battery level, iso etc etc. It works fine when the auto display is disabled and can be switched on and off using the disp button on the camera body but will not come on when it is enabled.
Check whether there is anything obstructing the range sensor just above the rear LCD. The sensor could be thinking that your face is near, thus turning off the display. Also, you should be able to use the Disp button even in auto display mode, which ... Canon EOS 450D + EF 75-300mm lens Digital Camera
I tried to shoot the solar eclipse with an X-ray film about 1 foot away from my FE 320 olympus camera. Thereafter the pictures display was reddish in colour for a while. After about 2 hours the display went blank. All the buttons are responding, menus being displayed but the display is just black and blank. please suggest.
I would suggest a new camera...and never do that again. There's a reason we don't look directly at an eclipse...your camera's sensor doesn't have healing abilities. ... Digital Cameras
Once camera switch off lens retracted but camera not switch off the sreen display is on
Remove the batteries and press power and hold for 30 seconds, replace battery and power on. ... Nikon Coolpix 3700 Digital Camera
Have a 20 month Optio E 40, today tried to switch on, lens woundnt come out, used the manual and switched on while holding arrow button, Playback piture showed in display, pressed half shutter to switch back and error message Lens error 113,0,0,0 appeared, Pentax want £80.00 minimum to look at it, can you help pleaseregards Terry
Try to take out the battery and put it back in. ... Digital Cameras
The display on my Ixus 500 has gone blank. It started to show weird colours when switched on but turning it off then on returned the display to normal. I knocked the camera the other day and the display is now blank both in camera mode and picture review mode. The camera makes the usual noises when selecting Menu etc. It also save picture to the memory card. Is it worth taking it to bits to look for a loose connection?
This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot SD100 / IXUS II Digital Camera
I have got Yashica Ez8032 Digital Camera and it suddenly showing Lense Error 21 & 16. It is not getting switched on and no sooner I switch it on it displays the Lens Error and gets switched off. I can't take any pic from it. What can I do?
... Digital Cameras
I have a Sanyo VPC C6EX 6megapixel camcorder which, when switched on, immediately takes a photo in 'camera' mode without any prompting. After that, it will not take a photograph in normal operation. I have moved the switch between REC and PLAY and tried both camera and video modes, but neither will respond when buttons pressed. Switch the camera off, and then back on again, and it still takes a picture automatically without warning....! Indeed, the camera seems to be 'confused'?...even in ME
Check if any of the button on your camera is remaning slightly pressed internally.if it is pressed make it proper .also tap the sides of your camera slightly for two minutes.then ON the camera and check out.\015\012if this does not helps.it the ... Sanyo Digital Cameras
Shutter problem hi! My camera DSC-P52 , which is a year old, is giving me some strange problems. When i switch it on , the shutter doesnt open completely and makes a weird crackling noise and then beeps a few times and it says on the display to shut down and switch on the camera again. And then if I point to setup and switch it off it closes. Any solutions. please help. thanks anshul agrawal
I have the P51 (2MP) and lens cover also gets jamned opening and closing most of the time and gave same message as yours. The camera was out of warranty and my Sony dealer said it was pointless reparing it as it would cost half the price of a new (an ... Sony Cyber-Shot DSC-P52 Digital Camera
Won't switch on. Display - switch off camera and turn on again.
This is in a service loop and will not stop until the unit is repaired, ... FUJIFILM FinePix S2500HD Digital Camera
HI i have sony digital camera as we are aking photos at beah some water gone inside and camera is not switching on,when it was switch on display showing white screen, please give me a sloution
Hi try to reset ur camera...To do such reset, turn on the camera and hold the menu button down for longer than 5 seconds. A message should hopefully come up on your LCD asking if you want to reset the camera. Select Yes...thank u!!!rate me!! ... Sony Cyber-shot DSC-W35 Digital Camera
My Sony DSC-p71 refuses to stay on. It switches on, but then switches off immediately. Only the led comes on, but the LCD display doesn't even have a chance to start. I'll be thankful for any help on this problem. Thanks!
The powersupply at bottom of camera is grounding itself out. flat rate if sent to sony around 150-180 i know that is as much as new one. hope that helps. ... Sony Cyber-Shot DSC-P71 Digital Camera
Lens error When the camera is switched on the lens does not open out and the lens cover does not open. The camera then displays a "lens error" message and suggests that the camera be restarted ten switches off. This happens repeatedly.
This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon PowerShot SD750 / IXUS 75 Digital Camera
Switch on the camera it indicats on display Err and then slitly push the click-buton then display r09 where dilplay the framr counter.I saw only mirror is functioning but shutter not open only move up and down.
... Nikon D80 Digital Camera with 18-135mm Lens
Lens assembly The lens assembly has become loose. One of the outer rings has actually detatched from the camera body.When switching on - either the message 'lens fault' is displayed or a very blurred image is displayed in the LCD. The camera shop reckons the problem is quite common and estimates $A200 to fix ie replace lens assembly. Any similar experiences? (Of course, the camera is 3 months out of warranty).
"Lens Error" requires to be sent into repairs. ... Casio Exilim EX-Z40 Digital Camera
ZOOM ERROR An error message "ZOOM ERROR" is displayed when switched on . Their is an sound from the zoom gears . unable to Zoom in or Out. It was drop down from 3ft height. I think an error with the cambarrel, shutter.... Any solutions or the cost of this spares.???? Camera dropped and has a very slight dent near batteries. LCD displays 'Zoom error' and shuts down. Any help?
Did you take it apart to look at the mechanism? Definitely sounds like something is broken or out of place. \015\012\015\012KEH.com is a well known repair house that may be able to give you a good estimate. \015\012\015\012 ... Olympus SP-550 UZ Digital Camera
Blank Screen My Canon PowerShot A75, is not showing images on display screen, neither it is recording pictures. The pictures are Blank when shot and downloaded. However .Now if I switch it on nothing is visible on display screen. I have bought this camera from India and now I am studying in france, it is such an issue to even find a Canon Shop in France...i hav been trying on net for days...please help me with procedure to get it repaired as I heard Canon is doing it FOC. Regards
Yes they'll fix this for free, see:\015\012http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black. ... Canon PowerShot A75 Digital Camera