Having problems with your Olympus FE-210 Digital Camera ?

Lens repeatedly resets

\015 On power up the lens repeatedly resets, i.e. it extends and then retracts. It does this 4 or 5 times befere powering itself off.\015

Answers :

Fixing a Lens Error on a Digital Camera
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Olympus FE-210 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lens repeatedly resets

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Olympus FE-210 Digital Camera

When turned on, Access comes up, and lens goes in and out 3 times, then screens says to power off then on again, This will repeat when powered off and on again and so on. I have tried a factory reset, but the same things appears. Access, then power off and on again

Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

How do u reset the canon digital ixus 900 ti it has a lens error the lens is sticking out a bit andwhen its off and then it gos out when u turn it on then shuts off and seas reset lens error

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon Digital Cameras

When I try to turn on the camera, lens reset erroe comes up on the screen. The lens it self is sticking out a little bit, not fully closed. How do I reset the lens?

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Digital Cameras

My D80 suddenly stopped taking photos while I was in Auto mode. I noticed the flash stopped releasing. I've changed lenses, reset the camera's green buttons, switched out the card, reset the clock. It will occasionally take a photo, not necessarily in focus,and the flash will on occasion pop, but I can't figure out what the correct triggers are. Can anyone help? Lens is 18-135mm. Set Lens in in "A" and camera is in "AF"mode. Thanks much.

Hi, Also, try a factory reset found on page 129 of the manual. On the left side of the camera is the terminal cover, inside below the USB connector is the reset switch. If that does not work call Nikon digital 1-800-645-6689. ... Nikon D80 Digital Camera with 18-135mm Lens

Lens error when trying to power on camera. no dirt in lens. lens extends buzzes retracts and turns and then repeats before fully retracting. Can see camera focusing while cycling and retracting. lens error appears on screen at end of cycle. tried tapping camera and lens body to dislodge dirt as well as compressed air on lens body without success. any ideas?

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Nikon Coolpix S210 Digital Camera

Lens Stuck Sony W55 outer lens got stuck since i accidentally dropped it on the floor,the lens is tilting to one side.I get access on screen when i turn it on...the lens tries to align itself but it fails...then i get the "turn the power off and on again" mesage and the process repeats...banging the camera didnt help!

If the lens is stuck out then you will find it is usually one of a few reasons.\015\012\015\0121. Check the batteries. (obvious I know).\015\0122. The camera has been dropped or knocked.\015\0123. The camera has grit or dirt i ... Sony Cyber-shot DSC-W55 Digital Camera

I have a new (3 weeks) D700 and while taking photos yesterday with camera and a 16-35mm lens, the exposure meter went ape. Pictures taken ok but ERR started to flash where shutter speed reading should be displayed in viewfinder. Tried everything, including resetting to factory settings, detaching and reattaching lens, checking switches, and then went home in despair. At home I switched to a 50mm lens and the problem disappeared. I put the 16-35mm lens back and problem seemed to have disappeared.

... Nikon Digital Cameras

Lens error When I first power on my camera, it tells me to retry power on. When I do, it says lens error and shuts down. The lens will extend and then close before the power shuts off, however it does not close fully. The protective shutter on the lens doesn't close completely. I have tried removing the battery and letting the camera sit for awhile hoping that the camera will reset, however this has been of no help.

Maybe the lens is stuck. ... Casio Exilim Zoom EX-Z80 Digital Camera

Lens error When the camera is switched on the lens does not open out and the lens cover does not open. The camera then displays a "lens error" message and suggests that the camera be restarted ten switches off. This happens repeatedly.

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I have a small Panasonic Lumix DMC-TZ5 camera. After fully charging the battery I am all of then sudden getting this error message :"please turn camera off and then on again." When the camer is OFF the lens is extended and open. When I move the camera to ON the lens moves in to the closed position closes, then reopens, extends, tries to focus, is unable to and the error message appears "Please turn camera off and then on again" This cycle just repeats. The lens is able to extend it is not st

Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101 ... Panasonic Lumix DMC-FZ7 Digital Camera

Lens problem turns on ok then lens goes out and in and out and in seeking focus it appears, then stops and screen says lens problem. it will then not do anything until shut off and on then it repeats the same thing. tried removing battery and putting it back, but no luck.

Try the procedures in this tip. ... Nikon COOLPIX L18 Digital Camera

Lens error I have a canom power shot SD 1100 is I try to turn it on and a get an error that read as follows Lens error, reset camers then the camera turns off the lens is oin the open possition and have used a can of dust buster to try and blow any sand and or dirt dust out but nothing can anyone help.

The same thing happened to my camera, searching on the net for an answer and i found this. Strange, but it worked. Set your camera on a flat surface with the lens facing up. Tap it a few times and try again. Sounds silly but it worked! ... Canon PowerShot SD1000 Digital Camera

Lens issue: Has anyone figured out to reset the lens that is stuck open or stuck closed? Has anyone figured out to take apart the lens and remove it from the camera?

... HP Photosmart M407 Digital Camera

My camera turns on by itself even with the slide in front in the closed position. The screen then shows the warning that the lens cover is closed. When I open and reclose the lens cover in 10 or so seconds the camera turns itself back on and repeats with the lens cover closed warning. The only way for me to turn the camera off at this point is to remove the battery. Help!

Most likely some dirt, dust, or other particle is jamming the lens opening gears. You can try to spray some compressed air into the lens assembly, hopefully dislodging whatever is obstructing the lens cover. If this doesn't work, the camera wil ... Sony Cyber-shot DSC-T77 Digital Camera

I just purchased a i936 yesterday. Put batteries in, turned on. The lens extended, lens door opened,the screen says Polaroid with color bars. Then, lens retracts, screen says Goodbuy w/ bars. I tried new batteries, I got into the menu and did reset. No image on screen, except commands.The above situation lasts about 3-4 seconds.

The lens will automatically retract in and will say Goodbye, only if the batteries were empty or drained. However, in your case, you have purchased a new battery and in face the camera is new. The reset is supposed to be bringing back the camera in ... Polaroid Digital Cameras

Lens error When I attempt to turn on my camera, the lens repeatedly moves back and forth and the screen says "lens error". Can this be fixed?

Try the procedures in this tip. ... Nikon COOLPIX L3 Digital Camera

Lens trouble My lens will not come out entirely on my camera, for when I push the button to turn it on, the lens tries to completaly come out but then quickly retracts back halfway and remains stuck about halfway open. The screen is black and the light flashes red everytime I turn on the camera, along with a noise of something stuck. I have tried using that little button that someone told me was the reset button, along with plugging it in, and charging it. None of this has helped me with fixing

Appears to be a repair issue... lens track may be off ... Olympus FE-280 Digital Camera

We drop the camera head first meaning all three lens were open and it jammed in and the lens wont come out and everytime we turn it on it says reset lens what do we do?

Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A630 Digital Camera

Lens error when I switch on the lens moves in and out repeatedly then the screen gives the message "lens error"

Try jiggling the lens. Use compressed air to blow out any grit around the lens barrel. If that doesn't do it, you'll need to get the camera serviced. ... Nikon Coolpix S210 Digital Camera

I have a Nikon d300 and a Sigma 55-105 lens, I mount the lens, reset the lens menu on the Nikon and I still get a fEE error code. I do get to shoot only at the 5.6 setting but all other settings, the shutter is locked

... Nikon Digital Cameras

When I turn on my Panasonic DMC-FX55 the lens comes out fine and the screen displays for 2 seconds then goes blank except for the message 'Turn off then on again' - which doesn't work. The only way to get the lens to retract is to select 'Playback' - tun off then on . The playback mode works fine and after 10 econds the lens returns to closed position. Is their a combination of buttons that reset the camera??

... Panasonic Lumix DMC-FX55K Digital Camera

My frind dropped my camera and my lens broke. It is a canon powershot SD600. When i turn it on it says lens error, press reset button. lens is stuck slanted-ly.it also is blurry wen u c the screen. "my friend" doent want to pay for it , so where can i go fix it and how much would it cost ?

Hi Dear,As we can see from your description of your problem. The issue is related to misalignment of the lens. As the lens is stuck it will not come in and out smoothly. And also as you have said the camera lens is broken. Hence, the best ... Canon PowerShot SD600 Digital Camera

My lens is stuck part way open so my camera will not turn on it says lens error shutting down. Is there anything to do to reset the camera or get the lens to close.

Try the procedures in this tip. ... Canon PowerShot SD1100 IS Digital Camera

Camera lens has mind of its own. On powershot sx210is the lens comes out, goes half way in then won't close. It is saying lens error, reset. Can you help please help on holiday of a lifetime with no working camera. I eventually closes about 9 times later. Mamy thanks.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1301 seconds