Having problems with your Olympus FE-270 Digital Camera ?
I can't transfer the images from my olympus master 2 Fe-270 to my pc, it says the device is not ready. what's the problem?
Make sure the camera is on and pc is selected on the camera screen when connected to the computer. You will need to have PC highlighted and select ok on the camera as this starts the camera and computer to communicate. Once communication established the LCD screen of the camera goes dark and the computer should generate a removable disk drive. Check the System Tray (lower right corner beside the PC time) for Safely Remove Hardware. When you click on it, it should read "Safely Remove USB Mass Storage Device Drive ?:" If you dont see that, then check the Device Manager to see if the camera is recognized as USB Mass Storage Device. The camera uses the driver usbstor.
Repair Help & Product Troubleshooting for Olympus FE-270 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I can't transfer the images from my olympus master 2 Fe-270 to my pc, it says the device is not ready. what's the problem?
Make sure the camera is on and pc is selected on the camera screen when connected to the computer. You will need to have PC highlighted and select ok on the camera as this starts the camera and computer to communicate. Once communication establishe ... Olympus FE-270 Digital Camera
Please help. Camedia D-230 Olympus brio digital camera. Problem, cant transfer images from camera to pc. pc says device is not ready?? The card can upload in a store to cd, but my pc cant upload from camera?
Recently had same problem - have no software but would like to obtain instructions for same camera.\015\012\015\012Found a way by using my FinePixViewer - this is from a fuji camera software.\015\012If you know anyone with a fuji di ... Digital Cameras
My pictures won't download!! I never had this problem before, so I don't know whats going on? I plug in the usb cord, and the camera turns on and everything, but the thing will not pop up where it usually says press ok to transfer pictures. I redownloaded my software to my computer but when I try to transfer the images from my camera to my computer it says THE SOFTWARE IS UNABLE TO FIND THE OLYMPUS DIGITAL CAMERA CONNECTED TO A USB PORT ON YOUR COMPUTER! HEEEELLP!!
Some comp seem to have problems reading from the olympus cameras. if you have a card reader take the card out and put into that. if not you can get one cheap and they simple to use ... Olympus FE-340 Digital Camera
I can transfer images from my nikon d700 to my desktop. The Nikon software have been installed in my computer. Every time I switch the camera on, to start transfer. The computer system says installed "device driver" . Whats device driver and where can I install it from? thank you....syed
Your computer is looking for a mass storage device. Go through the camera menu system and make sure "USB Connection" is set to Mass Storeage, then Windows will automatically install the drivers. ... Nikon D700 Digital Camera
I have a Olympus X-42 camera and currently use Olympus Master 2 to upload my photos. Half of my photos uploaded and now none of the rest will. It says ''Image failed to upload'' each time. It has also said ''device not ready'' many times. After I tried to open the photos via the disk drive d and it allowed me to I attempted to manually copy and paste the pictures into my documents. It would not allow me to do so, stating that the parametres are incorrect.After this happens when I check my : D di
Why not use a separate card reader and avoid all the problems? ... Digital Cameras
Transferring images to my computer . After I plug the usb cable from my computer to camera then turn camera on select storage then i press ok. Then it says the device is not ready. My camera has a fully charged batery. Thanks Jim
Have you considered NOT connecting your camera to your computer?\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either b ... Olympus EVOLT E-500 Digital Camera
I have just returned from the Galapagos with my newly aquired VIVICAM 6200w filled with underwater shots of sharks turtles and sealions - Problem when I try to upload my pictures onto a pc I get a message saying the card needs formatting if I use a card reader and if I connect through the USB it doesn't even acknowledge that the external device exists. I really really want to transfer these images please can you help
Faulty USB cable supplied with camera - problem now resolved - thanks ... Vivitar Digital Cameras
Before I moved, I was able to hook up my camera and transfer images with no problem, now after I moved and set my computer back up, I am unable to transfer images. I have one of those 4 USB hubs because I have several other items hooked up on my computer as well. I do not think it is back in the same port, could that be not allowing me to transfer images. The camera tries to connect but instead, it just says one moment and does not allow me to transfer. Please help me with this if you know what
Simple...use a card reader to download your pics to a folder you create on your desktop. ... Olympus FE-20 Digital Camera
I have a new Panasonic DMC-FZ38 digital camera and I seem to have a problem capturing video footage to a PC. I can record video on the camera and it plays back on the camera quite satisfactorily. However when using the supplied software (Photofun studio 4 HD Edition) to transfer images to the PC it fails to recognise that there are any video images. Only the still pictures are transferred. I have tried using other software also and that also says there are no video images. I cannot find anyt
I recommend downloading quicktime player. This player is made for playing pics and videos from these cameras. ... Digital Cameras
Olympus FE-320 Digital Camera will not transfer photos to Computer via USB port hook up. When connected and PC or Transfer selected, screen message on camera says "Wait" and never connects. When Olympus Master 2 program opens on computer it does not recognize Camera Connection and continues to search for Camera so no images can be transferred. This combination did work in the past but has stopped. All updates have been applied. Need help.
I'm sorry that the Camera is not recognized by the Computer. Unfortunately, knowing the Operating System is the key element in providing troubleshooting the PC connection. However, I will give you the troubleshooting steps which is general for ... Olympus FE-320 Digital Camera
Transferring pictures I am having an issue with transferring pictures from the camera. An error message has come up at the end of the transfer. It says:An error occured while saving images. Check your image capture device connection and try again.By that, it means the USB cord connection. So I have checked that. Then, I tried uninstalling the program and reinstalling. That didn't work either. I don't know what to do.Please help.Thank you.
Hi,A couple of things you can try:1. Insert the Camera's USB cord to another USB port of your PC;2. While disconnected from the PC, verify that the pictures are still inside the camera's memory;3. Reset the camera (power ... Digital Cameras
Problem transferring photos to computer...........I transfer many photos on a daily basis but since yesterday evening, can't figure out the problem. Camera works fine, USB cables are OK. On a couple occasions(I've tried many times) computer says it does not recognize device. I pulled up Nikon Transfer didn't see anything there. I don't know what to do next. Do you?
Hi.Please go through the following troubleshooting:1) Disconnect USB cable and replace camera batteries with fresh ones.2) Test using a different USB cable. The cable is a standard USB to Mini USB, available in most came ... Nikon Digital Cameras
Transferring pictures i recently obtained a camera from my daughter . It is an olympus camedia c700 digital camera. I went to the olympus site and downloaded the software to transfer the pictures from the camera to the computer but it says camera cannot be found. i looked under my installation page and i they dont have this camera on there. do you know what i can do to fix this problem?
Once the camera is attached to the computer via USB cable, windows explorer treats the camera card just like another hard drive. the same goes if the camera card is inserted into a card reader.Because of this, the camera can be seen as a ... Olympus Camedia C-700 Ultra Zoom Digital Camera
I plug my camera into my computer with the gray wire and then click PC yet the images never make it to my computer and when i go to transfer images from camera on the olympus master 2 it says there are no images
HiI presume that you are sure the camera has taken the images. My suggestion to get around this for this time and to avoid this in the future while picking up a few advantages is to get a card reader.Benefits:1. Gets rid of th ... Olympus Digital Cameras
Olympus fe-230 i cannot get it to take any photos it took 1 picture then everytime i took picture original image kept coming up i move thsi image to favorites and cancelled image no it just says no picture any clues to problem
Hello, and welcome to fixya.. It sounds like your camera is stuck in review mode. Try switching the mode button and taking a picture in each mode. Once you get the camera out of review mode it should be able to take pic ... Digital Cameras
Hi I have a Canon PowerShot 460 Digital Camera and it works great when I want to take pictures or make movies. The problem is that when I try to connect it to my computer to retrieve the pictures on the camera, my computer says that my camera isn't detected. I don't understand why that is because the camera's software works fine. I thought it was a problem with the USB cord, but it works fine with other electronic devices. The USB doesn't seem to work with the camera. I don't get whats the iss
Plug the camera up in the normal way and take a look at 'My Computer'If the PC is seeiong the camera it will indicate this by 'putting' up a new Remoceable drive Icon- If it has work at it from there.If it did nmot - Remove the Camera so ... Digital Cameras
I have a C-3030ZOOM. Had a HD failure and re-instaled CM 2.01 and updated to V2.3 that is running MS OS XP Pro. The computer is unable to recognize camera. When I connect the camer to PC via USB - I do not hear the "Bong" sound when new device is added. Going to Contol Panel to add devise, it says that drivers for device not installed (Code 28). Hardware update wizard cannot locate drivers. Loaded W2000 drivers. Rebooted PC. Started Olympus Master V2.3 and went to file to upload images from c
Presumably you downloaded this, extracted files and right clicked inf file and clicked install?\012Did you then reboot and try to connect the camera? Connect then switch camera on? ... Olympus Camedia C-3030 Zoom Digital Camera
Hi I have a Canon A460 which has worked fine. My problem is with the transfer of images to the computer. I get either a message saying camera not found or I get a message saying camera detected with a box underneath where I would expect to see zoombrowser or another software to launch the action. The box is empty so I can't select anything. This has only just happened recently. Probably around the time I installed a Canon MP270 printer/scanner (which is a pig to use). Thanks Pat
Well, obviously your registry has changed and your camera is no longer recognized. No problem....just get a card reader and use it in place of your camera. That's what the pros do. ... Canon PowerShot A460 Digital Camera
When transfering photos, ''the device is not ready'' message appear
\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012Hi\015 ... Olympus Stylus 710 Digital Camera
Not transferring My camera is plugged in correctly with my computer and camera but the error message I received says it is not an to check. I cannot download pictures to my computer I have been able to in the past I have even used other USB ports still nothing whats the problem?
... Panasonic iPalm PV-DC3000 Digital Camera
I can't transfer pictures i have taken on my camera to my laptop, i've installed what seems to be the correct disc and have clicked "camera and memory card" then "browse and download images" yet every time i do so a box pops up saying "no camera found" what am i doing wrong? obviously i have the camera plugged in via usb cable and then switched on so i really have no idea what the problem is. assistance would be nice. thanks, amy.
You could try a different USB port if you have one available but the real solution to your problem is to use a card reader instead of the camera. ... Canon PowerShot A85 Digital Camera
My easyshare camera won't transfer images to my easyshare software. It says "Adding item to album, 0% complete" for about 10 minutes, then stops.
Use a card reader. ... Kodak EasyShare C180 Digital Camera
After attaching Camera, d100, to conputer HP/XP and choosing transfer images from camera, I get message " can not find USB port". What could be causing this problem. If I load the Olympus Camedia 4.0 master on another computer, it workd fine.
... Olympus Camedia Brio D-100 Digital Camera
I have recently purchased the NX2 software, and as recommended changed the setting on my D70s from JPEG fine to NEF (or Raw). In the past I have downloaded files using either Nikon View software or the Microsoft download wizard. But the Microsoft wizard tells me their are no pictures on the camara, and Nikon View software transfers the first two images then encounters an "unexpected problem", and when I try again it says "an unexpected error occured. Try again. This just repeats. Can you help?
Try Nikon Transfer at http://support.nikontech.com/app/answers/detail/a_id/61.You can also download a codec from Microsoft that makes Windows recognize NEF files. ... Nikon Digital Cameras
Card problem When I turn my camera on, I am promted to either format my XD or turn the power off. When I tried to format it the camera said that there is a card error and it stops working. When I tried to download the pictures using the Olympus Master software, it said the device wasn't ready. So, I can't take pictures and I can't dowload and free up my card. What should I do?
I haven't had this problem with a Cannon card but it may be the same solution.\015\012Take your card to a card reader, Walgreens, Target, or even your own printer or computer may have a card reader. If you can, view the photos get copies. Then ... Olympus FE-240 Digital Camera