Having problems with your Olympus FE-270 Digital Camera ?

Snaps are blurr when we switch off the flash....

\015 Whenever i take a snapes in flashOFF mode & doing lens zoom ,the snapes are flacktuateits not happen in flash ON modebecause of this m not able to take natural snapes...............\015

Answers :

Not familiar with this Camera, but does it have an Auto Flash setting which you can set so the camera will decide if flash is needed or not try this if it is available and see if that helps.
Repair Help & Product Troubleshooting for Olympus FE-270 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Snaps are blurr when we switch off the flash....


Not familiar with this Camera, but does it have an Auto Flash setting which you can set so the camera will decide if flash is needed or not try this if it is available and see if that helps. ... Olympus FE-270 Digital Camera

Flash Error Hi there, bought this camera about 6 months ago. I'm intermittently getting a problem with the pop-up flash. It pops up fine, but the screen gives me an error telling me it hasn't and won't take any shots. Have to keep switching it off and on and hoping it will work again. Sometimes it's a couple of days before it works again. It will take shots when I switch the camera to the 'no flash' setting, so it does seem to be just the flash. The error says that the flash release is jamming,


The error 5 can mean that there is something blocking the flash from popping up. If it is up but still get the message then you need to check to see if the little black pin/stick that lets the camera know that the flash is up, is not stuck. With the ... Canon EOS 400D / Rebel XTi Digital Camera

Put a new fully charged battery in - the camera would lasted for a couple of minutes and then would not switch on. The battery works fine in an identical camera. Put in a second battery - that worked for a bit then started flashing battery problem and wouldn't switch on. 5 minutes later - it did switch on - lasted for a short time and then started flashing ERR 99, and then wouldn't switch on again. Battery works fine in an identical camera. 10 minutes later - started working again, but the Sigma


It is due to some kind of electrical contact failure. For more \015\012details and common causes of Err 99 read the following article:http://www.lensrentals.com/news/2008.12.31/canon-err99 ... Canon Digital Rebel XT / EOS 350D Digital Camera with EF-S 17-85mm IS Lens

Nikon D300 constant flashing of CF lamp My D300 CF lamphas recently started flashing continiously when the camera is switched on or off. The battery power is completely drained within 12hours, despite having switched the camera off. I have three Compact flash cards that seemed to be working ok without a glitch. I have tried reformatting the cards in the camera but no luck. I hvae the following cards. (SanDisk extreme III 2GB, Lexar Professiional UDMA 300x speed 4GB& 2GB). The camera is


Did u do a hard reset? ... Nikon Digital Cameras

Camera flash i generally use my camera on auto mode so i don't have to play around with buttons! however after loaning my camera to my sister for a week my flash is no longer as great as it was!! I used to take pics and the flash would light 2-3 times giving a great, bright picture. It now flashes once before the pic is snapped giving a dark picture. If i push the flash button on the left side of the scrolling circle it goes from red eye flash (which flashes once) to no flash! I'm almost certain


No worries, I think I can help you with this one.\015\012I believe that if you are using your Samsung Digimax in either "Auto" or "M" mode you will only have the options of "red eye flash" or "no flash". BUT HOWEVER, if you select the "Prog" mo ... Samsung Digimax S600 Digital Camera

Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t


I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens

The blue power light is flashing on and off but i can not switch it on or use it on the PC. It was working fine plugged into the PC and then had a power cut so everything cut off. Since then the little blue light on the power button keeps flashing every few seconds but no matter what i do I can not switch it on.


This camera is very good and takes excellent pictures. \012Check out repair at Teleplan Camera Repair.\012They have an immediate online ... Olympus Stylus 820 Digital Camera

Why won't camera switch on and red light flashing all the time i have bought a new battery but still won;t switch on and light still flashing many thanks


Hi, what type of batterys have you brought as most normal batterys you buy wont even switch the camera on you need hi power batterys such as lithium or even better go into a camera shop and they will have special high power bats, normal bats wont eve ... Kodak EasyShare Z730 Digital Camera

Casio Exilim Z850 The red light labelled'operation lamp' in the manual keeps flashing and when it is flashing the photo is not able to be taken or stored. Sometimes i can press 'disp' button, but it is not permenantly helping. From time to time when I switch my Casio Exilim EX-Z850 on there is a blinking red light next to the view finder. When this happens I can't take any pictures. Then the next time I switch it on it has gone and everything is fine again.


... Casio EXILIM ZOOM EX-Z850 Digital Camera

I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f


Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera

Camera will not turn on. As I rotate the selector switch the light flashes at each position. Even when I switch it to off the off light flashes on and off. The screen stays on but it is blank.


Hello, Did you try pressing the little silver button marked "EVP/LCD" it is located at the left of the view finder,This turns the screen on and off.Hope this takes care of problem.Best Regards, Russell ... Kodak EasyShare DX6490 Digital Camera

I have a Vivitar Camera that I bought from a Pawn Shop. The Flash worked fine for the first few months having it. I didn't use it for a while, and once I finally did, I heard 3 pops. After that my flash no longer works. When I switch into Flash mode it blinks and goes back to No Flash mode. Do you think it's the flash tube, the circuit or the battery that charges the flash? I opened the camera and nothing looks blown.


The 8025 is a very cheap camera....I hope you didn't pay more than $15 at the pawn shop. Your camera has a blown flash tube. The camera could have been dropped in water by the previous owner. You could have bought one at Walmart that would have at le ... Vivitar ViviCam 8025 Digital Camera

I have a Nikon D90 with 18-105 mm lens. Lately, the onboard flash has not been firing even when I try to enforce it by having the flash popped up. It will only fire if I do one of the following: 1) unmount the lens from the camera body and then re-mount it back on, which the flash will fire maybe once or twice and that's it!, or 2) switch on a different lens which definitely works with the flash firing every single time. What needs to be done? I purchased this lens last December (2009). Is


Sounds like a dodgy electrical contact, possibly between the lens mount and the camera body. The lens ought to still be in warranty, but that would depend on what warranty the manufacturer or seller offer in your part of the world (in the UK, the sel ... Nikon D90 Digital Camera with 18-105mm lens

My camera (Pentax Optio E90) is less than two months old and the flash has suddenly stoppped working even when i choose the option which uses flash no matter what.. What has happened to it? Instead of the usual flash symbol on the display it's showing a red flashing symbol when i first switch on my camera which goes away after a few seconds.


Hi dear Sir, your camera is in waranty please make use of.\012\012Greethings ... Pentax Optio E90 10 MP Digital Camera with 3x Optical Zoom and 27Inch LCD (Wine Red)

Hi Flash symbol on my camera appears but it will not flash when I take photo. When I take a photo with flash switched off it is brighter than with flash on.


Try setting different flash modes through guide ... Olympus FE-310 Digital Camera

I am unable to suppress flash on my Fujifilm s9100 in any mode that supports flash. Even with the flash down it still fires except in Landscape scene mode and Super Macro mode. I do not know where the switch for the flash is located and will likely send it into Fuji for repair, but wanted to check to see if anyone has experienced this problem before I do so.


... Fuji FinePix S9100 Digital Camera

My camera's flash is not working and the icon of flash keeps blinking every time i try to click a photo. Also the camera works fine when I switch off the flash.


If its blinking then it meas that it is not adequately charged. The flash indicator will turn to steady orange if its properly charged. ... Canon PowerShot A640 Digital Camera

Hi, when I click on the button to view pictures the camera switches itself off. Also if I click on the tool box menu the camera switches itself off. Also if I connect to my PC it doesn't see the camera - the camera flashes USB mass storage and then switches off. Please can you help?


Have you checked the batteries on the camera? Weak batteries will shut the camera off any time ther is a call for power that exceeds the charge left in the battery.If after you change or charge the battery and you are still having this issue let me k ... Sony Cyber-Shot DSC-WX5 Digital Camera

MRS. I believe it needs a new dial switch? Whenever i move it to a new settting it sometimes dosnt switch. When I switch it to off, it doesnt turn off. And at times it will flash on the screen as if i am swtiching between two settings back and forth, when I am not.


I checked to see if there was firmware available for free download. Unfortunantly not. The alternative is a KODAK repair for this fault. \015\012However due to spare part shortage this model is no longer repaired. Instead KODAK offers a trade u ... Kodak EasyShare DX4530 Digital Camera

When I use my Metz CT45 flash gun I get an error message on my EOS 10D and have to switch off to return to normal function. The problem has got worse recently. A couple of years ago I took about 40 pictures using the flash gun and got no problem. Do I need some sort of attenuator in the flash lead? Hope you can help Norman Rushworth


... Digital Cameras

Using e-510 camera with fl-36 flash. With flash on focus very slow and does not complete focus. Switched lens and flash to e-520 and works fine.


Hi,\015\012There may be a piece of lint or an accumulation of dust on the autofocus sensor, which is located in the bottom of the mirror box in the camera body. Lint or dust resting on the sensor can confuse the autofocus system, resulting in l ... Olympus Digital Cameras

Err 05 the built-in flashs auto pop-up was obstruced turn the power off switch to off and on again. The flash pops up but it continues to say that the flash was obstructed and will not take any pictures.


... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Bought this product on 28/03-08 at bangalore.all snaps taken out-doors becomes too whitish and not able to see anything, the lcd screen on review shows no snap..but white over exposed result even at auto-mode. cannot take any snaps outdoors in ordinary day light.indoors with flash result is excellent.pl help. b.a.v.baliga


Make sure your ISO setting is set to Auto. Even in auto mode its possible to set your ISO manually. If the ISO is set to auto and the pictures are still to bright, your sensor may be bad. Also make sure your exposure compensation is set to 0. ... Kodak EasyShare C613 Digital Camera

Camera jam Ricoh Caplio R5 - tried to switch it on to take a picture, and lens came out part way but the camera then switched off. Flat battery perhaps, so charged battery overnight and tried again with similar results. Lens still part way out, maybe some whirring noises, screen flashes but then camera switches off. Any ideas? Dead battery / broken charger? - or problem with camera? And how to check (I only have the one battery)


All the R series Ricohs have a pretty complicated lens system employing 2 swing-out lenses which can get stuck pretty easily, or worse, broken. If you are very good at taking things to bits you might have a go at fixing it (I've done several that wer ... Ricoh Caplio R5 Digital Camera

I can't seem to get my autofocus to work on my new Canon T1. The mode dial is switched to full auto, the fous mode switch is on AF, and the Image Stabilizer switch is in the "on" position. When I depress the shutter halfway, I get flash indication, some digital numbers, but no change in focus, no beeping, even though it is on and the focus confirmation light does not illuminate. I've searched through the manual to see what I am doing wrong, but can find nothing. Any help you can offer would


Hope I can help with some input to your problem. Let me suggest please that you switch the "mode" dial to "P" for program, check your ISO (I personally shoot ISO 100) and set it for a speed ISO 400 or lower. Most DSLR's use contrast to focus so a mir ... Canon EOS Digital Rebel XTI Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1216 seconds