Having problems with your Olympus FE-280 Digital Camera ?

Camera lens moves out and in for an extended period and camera will not focus. Makes a grinding noise. Zoom in and out does not work


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Olympus FE-280 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Camera lens moves out and in for an extended period and camera will not focus. Makes a grinding noise. Zoom in and out does not work


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Olympus FE-280 Digital Camera

My Ricoh R4 camera has its lens stuck in the fully extended position. After switch on, it makes motor noises for a while and then stops and switches itself off. Switching the camera on and off does not move the lens. Also, operating the zoom buttons does nothing. Having this great little camera working again would be fantastic!


Hi there,Make sure the camera is fully charged. Then try this: Turn off the camera and hold it on your right hand with the lens facing the ground. Then hit the camera's base on your left palm as you turn it on. You might want to do th ... Digital Cameras

Strange noises I bought it last week and its makes strage "clicky" noises when on. I've exchanged it twice and all 3 have made the same noises. Is this normal? They don't sound like normal camera noises and the store where I bought it listened and agreed that each camera seems to be not working properly. The clicks keeps happening even after I've turned all the noise settings to silent. It the Kodak EasyShare M341 Orchid 12.2MP Digital Camera with 3x Optical Zoom. Thank you so much!


This camera has an auto lens. Which means it will focus automaticly evey sec. you can turn this option off:\015\0121: Go into the menu\015\0122: Chose option Cam Setiings\015\0123: Swich AUTO focus to single lens and click OK. ... Kodak Easyshare M341 12.2MP Digital Camera with 3x Optical Zoom and 2.7-inch LCD

My camera worked fine one day, then it was in my purse. When I went to use it the light was on and the screen said there was a lens error. Everytime I try to turn it on now it makes a grinding noise and refuses to open and then closes completely with the lens error reading For no reason my camera (Nikon coolpix model S210) doesn't want to work with the term "Lens error" and lens won't come out WELL YESTERDAY MY NIKON COOLPIX s210 DIGITAL CAMERA WAS WORKING PERFECTLY FINE THEM I GOT UP TO TAKE P


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min. ... Nikon Coolpix S210 Digital Camera

My camera worked fine one day, then it was in my purse. When I went to use it the light was on and the screen said there was a lens error. Everytime I try to turn it on now it makes a grinding noise and refuses to open and then closes completely with the lens error reading For no reason my camera (Nikon coolpix model S210) doesn't want to work with the term "Lens error" and lens won't come out


Hope you purchased an extended warranty. I've had two Cannon's with the dreaded lens error. Probably what happened was that while it was in your purse, somehow the power button got pressed. The camera powered up, tried to extend the lens, then str ... Nikon COOLPIX S200 Digital Camera

Olympus FE-210 I dropped my Olympus FE-210 when it was on and the lens was out. Now, the camera still workes fine, but the lens will not close all the way. After I shut it off, it opens and closes as if trying to fix itslef, but tops after three tries. The zoom still works, but it makes a clicking noise as the lens adjusts. I wouldn't mind any of this, except that now I can't upload my pictures. Normally, when I hook up the USB, a screen comes up on the camera dispaying my options. Now when I ho


Dont drop it next time you ****** !!! ... Olympus FE-210 Digital Camera

The camera was working fine until I purchased a pack of kodak rechargeable batteries. After a week or so of using them my camera stop coming on when I would press the power button, it would make this beeping noise and the lens wouldn't extend. After continuously pressing the power button I got it to come on but again the lens did not extend and the screen was frozen. Why am I having this problem and how can I fix it?


Having gone over a month with no response, I assume this is no longer a problem. ... Samsung Digimax S600 Digital Camera

Zoom error the zoom on m camera wont close back in everytime i turn the camera on it makes a noise as if its tryn to shut over and over but it cant.I tried taking out the battery and reinserting a while late, didn work, any ideas?> help would be appreciated greatly :)


Worked on allot of fuji's. first detease, a gear is slipping in the lens retract assembly due to a crack or wear or jam2nd guest .. zoom errors means its really stuck tight the gears can be ordered and replaced and one more ... Fuji FinePix F460 Digital Camera

I have an Sony Alpha 100, when I turn the camera on with the 18-70 lense the camera makes a terrible noise and does not focus. Camera works fine with the zoom lense.


... Sony Alpha DSLR-A100 Digital Camera

Hello, I love my sd600 had it 4-5 years.... last week it started making a noise when the lens is extending or retracting....it still works fine but I am puzzled by the noise... is camera on its last leg. Thanks, Dave


Hello Dave.The sound which you are hearing is the the lens motor. When you can start hearing an unusual noise hear, i would suggest that you take your camera in to your nearest repair shop, before any further damage is done.Th ... Canon PowerShot SD600 Digital Camera

Upon hitting the 'power' button, the camera makes a low beeping noise, the lens on my Olympus FE-280 goes in and out, and then stays extended. The camera can then only take a poorly focused shot. The Wide/Telephoto button does not work.


Your camera almost certainly has a lens error. This\015\012 is such a common fault that I hope you don't mind me pasting my stock \015\012generic an ... Olympus FE-280 Digital Camera

About seven days ago bought shelf display Fujifilm S1000. Worked fine at the store. Got home, read instructions, powered up, lens would not extend, "zoom error" displayed. Camera was room temp. When switched on, camera beeps, extend motor clicks, sounds like a gear engages for a split second. Took back to store next evening, it worked fine. Next try at home, same problem. Back to store, worked fine. Tried at home and at work, still "zoom error". Again to store, worked fine. Ready to return, stil


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S1000FD Digital Camera

I have a Nikon Coolpix L14. I have had it for a while but it hasn't been used very often. I took it to the beach one day, in a plastic bag, and a few grains of sand made their way into the bag. Now, I keep getting lens error when I turn the the camera on it extends partially, makes a noise, and then retracts and on the screen 'lens error' appears. And yes , I HAVE tried compressed air, it didn't work


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Nikon Coolpix L14 Digital Camera

Canon SD600 -> lens error when camera turns on, won't extend fully and makes grinding noise


Is the lens closed all the way. When I saw a separation of the black part at the very front to the lens, I got the error message. ... Canon PowerShot SD600 Digital Camera

My Canon S2IS has served me perfectly for over five years. All of a sudden it is going through a set of new batteries in half an hour. A few pictures and short video clips after installing brand new Duracells I was getting the low battery warning and then a few more minutes of same it was dead, showing the change batteries message. Any ideas or is it time to retire this baby? Also, when I power up the camera, the lens makes a grinding noise while it is extending. What's up with that? Could it


Are you new batteries are NI-MH ones?\015\012Canon canon's low vote detection setting is low, and you'd better use Li-ion Canon Camera batteries. ... Canon PowerShot S2 IS Digital Camera

Canon g9 Camera was dropped. Now lens will open but not extend and motor to move lens makes a grinding noise. Is this repairable?


Yes it is the lens is exspencive but it canbe replaced. cost on the lens is about 150.00 for parts and labor. could be more or less at other digital camera repair shops. ... Canon PowerShot G9 Digital Camera

My camera comes on but goes right back off the zoom lens does not extend and I have changed the batteries twice. When I turn it on it make a noise like crickets and says goodbye.


Mine just started doing this... I barely ever use it and got it as a gift for Christmas. I was just about to send it in but their warranty says they need a receipt or proof that it is with-in warranty. Ugh... ... Polaroid i1237 Digital Camera

When i power up my casio the lens makes a clicking noise and doesnt extend all the way out if i zoom out the lens does come out but the focus is poor and i get a lens error message and the camera turns itself off.


Try these procedures. ... Casio EXILIM Card EX-S770 Digital Camera

Lens stuck Please help me, I tried to turn on my camera today (it had been working fine before) and when I tried to switch it on the lens would not fully it open and my camera was making a whirling noise. The screen is black and will not take photos. The lens won't open fully and when it does eventually close has difficulty doing so. The camera then makes a beep beep beep noise and displays "Please turn the power on and off again". Please help I can't live without my camera and can't afford


If the lens is not coming out, its stuck, or it wont completely open or close, that is the lens assembly, that needs to be repaired. You need to take it to somebody, that can either repair it or replace it for you. There is nothing that can be done, ... Sony Cyber-Shot DSC-P8 Digital Camera

Just got a new 18-105 Nikon lenses - during auto focus it sounds like a grinding noise and it does not focus. It is not the camera a D7000, because I tried another lense on the camera and it worked g


... Nikon D7000 Digital SLR Camera Kit with 18-105mm DX VR Lens, 16.2 Mega

Sony dsc t-70 no display on screen when camera is turned on screen remains blank, camera still makes noise when taking photos, when you touch the screen it makes noises like its working but the screen remains black


Possible failure of the display unit , the fault seems serious and there is no solution from the outside. It needs attention inside the camerawhich will need experience. I would suggest that the camera is delicate and must be looked into at the sony ... Sony DSC-T70 Digital Camera

When i turn on my camera the lens goes out, makes a noise, zooms in, makes another noise, then goes off. the number of the camera is kodak easy share m883


Make sure that you are installing a fresh/ full charge battery\015\012Remove the batteryClean the metal contacts on the battery using a clean cloth \015\012Pls test with an alt. batt.If you do not have access to a dif. b ... Kodak EasyShare V603 Digital Camera

Recently, i've been having an issue with my Kodak Easyshare M883 camera Every time i press the power button, the camera turns on, makes a weird noise, zooms in and out to refocus, makes the noise again, then completely shuts off. Its done this every time i turn it on for about a month now. I am completely able to review my pictures, let alone take any. I've tried plugging it into the computer, and even charging it overnight. please help me.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Kodak EasyShare M883 Digital Camera

Zoom error I turned my F470 camera on and received a "zoom error" bar across the screen. The lense does not move outwards after I turn the power on, nor does the plastic sliding screen close when I turn the camera off. The lense is exposed whether or not the camera is on or off. The lense does not make any sounds when I turn the camera on, but I hear (what I think) are the gears when I turn the camera off. When the camera is on, the screen is working, but the image is blurry. I tried other poste


Hey MBB722,\015\012 What is most likely going on is there is something stuck in the lens obstructing its movement (i.e. sand). I don't know what you have tried and what you have not tried you can try placing the came ... Fuji FinePix F470 Digital Camera

Lens error When I switch on my Exilim Z-500, the zoom extends only half way of what it used to and there's some cracking noise as if something was blocking it. The zoom is at maximum, i.e. when I zoom in further it goes to digital zoom. But when I try to zoom out, it gives me another cracking noise, a lens error message and switches off. I can't take any pictures because the zoom setting seems to be totally messed up. The image is all blurry - at any distance. I partly disassembled the camera a


The lenses are mounted to cylinders and the outside of the front cylinders have pins mounted to them. The pins ride in little tracks that move the front one in and out. The cylinders rorate with a motor and gears. You could have damaged gears or the ... Casio Exilim EX-S500 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4106 seconds