Having problems with your Olympus FE-280 Digital Camera ?

When turning on the lens goes in and out 5 times then stays in and will not operate

Answers :

Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Olympus FE-280 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

EX-S500: * I turn it on and the 'Adjust' screen comes up. *I press the 'Menu' and the lens comes out, the green light flashes for awhile, it beeps a few times, it grinds a few times and shuts off. The lens stays out. *I turn it back on, the lens goes back in and the 'Adjust' screen comes on. * I press the power button and the camera goes off. *I left the camera in the charge gradle all night and the battery did not charge. *Help

You could have a power and lens issue, going on at the same time here. There's a couple of web blogs that delineate things you can try to correct these issues, and here they are:\015\012 ... Casio Exilim EX-S500 Digital Camera

When turning on the lens goes in and out 5 times then stays in and will not operate

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Olympus FE-280 Digital Camera

Cybershot dsc-w100 well actually my camera is a cybershot dsc-w100 and when i push the on button it says access but after that it goes to a mode where it says turn the power on and off again and i turn it off but still does not work. as i do this the lens goes in and out like three times and when the camera is off the lens stays out

If you cannot find a solution to your problem you may want to email [email protected] He has good advice and good used parts at a fair price. ... Sony Cyber-Shot DSC-S40 Digital Camera

Ok so i am turning on my camera (an Fe-340) and the lens go in two or three times then when the screen finally does come on it is blurry and way out of focus, also when i attempt to adjust the zoom the camera turns itself off, if i attempt to turn the camera off using the power button it goes off but the lens does not retract.All other functions on the camera are operating correctly to my knowledge i can even take a blurry out of focus picture, view it in display mode or even transfer it to my c

It may be something more serious, but the problem you describe is\015\012frequently due to corrosion on the battery contacts inside the camera. \015\012Remove the batteries and wipe the camera contacts firmly with a clean\015\012cloth (heavy corrosio ... Olympus FE-340 Digital Camera

Screen stays black when I turn my Olympus 800 on. The lens does come out, when I remove and put back the battery the camera the lens goes in and out and the camera works fine. I have to do this every time I turn the camera on. Can you help?

I've had cameras do that also. Not sure what the problem is, but it's going to need to be serviced to figure it out, it's not a setting problem, or something easy, and my problem was intermittent...so that made it even worse. Today's digital cam ... Digital Cameras

I don't know what to do... I have a sony cybershot... Turn it on and the lens goes in and out 3 times and then stays out then the lcd says turn camera off and on. Please suggest a remedy... camera just over a year old. Regards, [email protected]

If the camera has recently been dropped you may have lens damage that's\015\012preventing it from powering up. If it hasn't been dropped your\015\012problem\015\012may be due to corrosion on the battery contacts inside the camera - which can\015\012p ... Sony Cyber-shot DSC-W90 Digital Camera

I have a i530 that won't stay turned on. It beeps a really strange sounding beep three times, then goes directly off. The lens is protruding out, and the eye itself is only half open. I have changed the batteries. Brand new batteries are in it...Now what??

Haha ok so same thing happened to me. Basically i thought it was ruined so i threw it pretty hard on the ground while still on and then tried turning it on to see if i had busted it and the problem was fixed. Kinda unorthodox but worth it if you want ... Polaroid I533P Digital Camera

When i turn on my olympus fe-3010 the screen stays black and the lens justs goes in and out the the camera will beep a few times then shut off

It is the problem of the lens,fuctioning/sensors of the lens,get it serviced. ... Olympus FE3010 Digital Camera

I have a Kodak EasyShare Z1485 IS, the lens barrel is stuck in the furthest extended position. It was left alone and not operated for several months, though I have replaced the battery. The camera turns on for about 3 seconds at a time, I tried to turn it on several times with the lens barrel inching forward each time. It stopped going forward and has become stuck in what appears to be the furthest-extended position.There does not appear to be any particulates obstructing the lens barrel as far

Your camera almost certainly has a lens error ... Kodak EASYSHARE Z1485 IS Digital Camera

Lens Error! We have a Nikon Coolpix S6. When attempting to turn on, the camera buzzes. Afterward, the screen shows what the lens is pointing at, but then it goes white and the words, "Lens Error" appears. I can't find the manual to pinpoint the problem. Also, when the camera is turned off, the lens cover stays open, and only goes back when the bateries are taken out and put back in. Please help quickly, this is a school camera, and it is needed for a large scale progect. (yearbook). We h

I know this is really late, but I've been having the same problem with the S6 on and off for the whole year, and I suspected a loose part.\015\012\015\012For a whole week, I couldn't turn on my camera, and the lens cap doesn't close until five minute ... Nikon COOLPIX S6 Digital Camera

My ex Z1000 wont take pictures. i turn the camera on the lens goes in and out some times it looks like its going to let me take a picture and then the lens closes back into the camera and the screen goes black. It looks like the cameras off but I push the play button on top and it lets me view pictures. I don't think its the lens because the lens seems to open and close fine. Ive only used this camera 3 times and it has been stored safely so Im not sure what happened. It will only let me get int

Your camera problem has the problem chance. Fisrt you should try with full charge battery. sometime weak battery cause also. Second main pcb does not resetting every time after taking picture.\012I hope you luck! \012Would you give more detail pr ... Digital Cameras

As soon as i turn the camera on, the lens goes out, then retracts and does this several times. sometimes it makes an unusual elctronic/mechanical sound. it stops retracting and sending out the lens after about the 3rd or 4th time, the screen then says "lens error". from here i can not do anything but turn the camera off. how can this be fixed? this is a nikon coolpix s550

Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Nikon Coolpix S550 10 Megapixel Digital Camera (Graphite Black) with 5x Optical Zoom + 4GB Memory Ca

Help! Hi I am having trouble with my sony camera. Every time I turn the camera ON, the lens starts going out and the in for several times. Then, the screen tells me to turn the camera OFF. It seems to me that the lens cants find home position and cycles through its operation to stop at home but can't. Is there something I can do. Sincerely Jose

I have the exact same camera as you..i had the exact same problem as you did too..i got so madthis worked for me, so i think it will work for you1.take the batteries out of the camera2.hold the power button for 30 seconds ... Sony Cyber-shot DSC-W50 Digital Camera

When I turn on the camera (Lumix DMC-FX35) the lens goes in and out a few times and then displays a message telling me to Please turn camera off and then on again I have done this several times and the lens problems persists What should I do?

... Panasonic Lumix DMC-FX35S Digital Camera

LENS PROBLEM Lens keeps zooming in and out when I turn it on. After 4 times, the lens goes back in and it says on the screen, "Turn the power off and on again". Then it does the same thing when I turn it off and back on. Also, the shutter is not closing however it's also not all the way open. Almost half way but more open than closed. Please help!!!

The slightly open shutter is the reason for this problem. Thank God you mentioned it. \015\012Solution: Try with your fingers to shift the shutter “blades” back and forth to see if they move freely. If they do no move freely it maen ... Sony Cybershot DSCW80 7.2MP Digital Camera with 3x Optical Zoom and Super Steady Shot

Blurry images I purchased about a year ago a new Panasonic DMC-TZ4. And up until this point, I was in love with this camera. However, just recently, sometimes when I turn the camera on, the screen is showing images to be out of focus and blurry. All the settings are correct. Some times it stays like this for hours. Other times, I can turn the camera off and then back on and the blurriness goes away. Twice the camera has frozen and I had to take the battery out. And some times when I turn the cam

Sounds like a lens problem. If you've ever let the camera "auto turn-off" as a power-saving measure, any button pushed will turn it back on...even if it's in a case or your pocket. This puts strain on the lens as it tries to come out...result....lens ... Panasonic DMC-TZ4 Digital Camera

Panasonic DMC-FX3 turn lens come out but message please turn camera off and then on again. If you turn it off lens stayes out until you turn it on again then goes back in and out

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic Lumix DMC-FX3 Digital Camera

When I turn on the camera the zoom lense goes in and out and it says" PLEASE TURN CAMERA OFF AND THEN ON AGAIN" When I turn it off the lens stays out and when I run it on it gives the same error message and it will not focus or let me move the lens in or out.

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Panasonic DMC-TZ5 Digital Camera

Every time I turn on my camera the lens goes in and out several times and then says "Turn the power off and on again". I did it several times and it's still not working.

Hi,First off how long have you owned the camera and how long have you had this problem? This unfortunately is fairly common. Once I have more information I can assist you further.Thank you,Lee ... Sony Cyber-shot DSC-W80 Digital Camera

Have had the camera about a year.... today took a picture with it and screen went black, the camera froze up (zoom lens stayed out didn't close). I have put new batteries in it.... the green light comes on on the back but the lens stays out.... the screen stays black. When I hold down power button to turn it off it quacks like a duck and goes off.... Please help!!!

This\015\012 is such a common fault that I hope you don't mind me pasting my stock \015\012generic answer below. No point in reinventing the wheel!Stuck lenses are probably ... Polaroid i830 Digital Camera

When I turn the camera on, it buzzes four or five times (a sound I have never heard it make before) then displays "Please turn the camera off and then on again". When I turn it off, it buzzes again two or three times, the screen goes blank, but the lens does not retract. The battery is charged, and the problem is the same whether in picture or display mode, whether plugged into the computer or not.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-TZ50 Digital Camera

Hi i have the sony cybershot 7.2 mega pixels and when i turn the camera on the lens goes in and out in and out a couple times then goes back in the camera and the camera always sais after that to turn off the turn on again

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-shot DSC-W70 Digital Camera

Lens error Hello. I've had my camera since October now, and of course it's fallen a couple times or been bumped into things, but it's always worked fine afterwards. But tonight, I had it on my tripod, which apparently isn't as sturdy as I thought it was, because it fell straight forward. My lens fell right on the concrete. It is like, visibly crooked now, not much but you can tell, and every time I try to turn it on the lens tries to extend but then it just stops, the screen goes black for a sec

You will most likely need to send the camera in for service. There really is no way to repair this problem on your own.Since you are not out of your 1 year manufacturer's warranty, you will not yet qualify for the upgrade program, however Canon ... Canon PowerShot A540 Digital Camera

Camera frozen I have recharged the battery and have changed charged batteries several times, howeverer when I turn the camjer on nothing happens(the lens is and remains extended ) but a red light blinks for a short while then goes off. The first few times that I tried to turn the camera on there was an error messafe on the screen saying error and a number but I don't remember what it was. Please can yoy help?

Try removing the memory card first then turn it on ...see what happensthe problem maybe with your card and not with the camera ... Kodak EasyShare C360 Digital Camera

Camera Everytime I turn my camera on it comes on, but the lens goes in and out a few times before the screen goes completaly black and says to turn the camera off then back on again, I do, and the same thing happens all over again, not allowing me to take any pictures. However, I can still view the pictures that have been taken...and that are on my memory card.

It a lens misalignment try tapping the lens gently in an opposite direction the camera dropped on and that should pop the gear back into place ... Sony Cyber-shot DSC-W70 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 2.9629 seconds