Having problems with your Olympus FE-300 Digital Camera ?

Olympus fe-3000 will not work: lens is stuck out and the screen is on but completely blank.


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Olympus FE-300 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Olympus fe-3000 will not work: lens is stuck out and the screen is on but completely blank.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Olympus FE-300 Digital Camera

Is there a way to "restart" my Casio Exilim EX-Z700? While I was taking a picture it seemed to freeze while it was trying to display the picture I just took - then, with the lens still popped out the screen stayed blank and it turned off, and now it won't turn on. The lens is still stuck in the "out" position. No buttons work. I tried to put it in the cradle to charge, and tried a different battery as well. Nothing works. Camera is dead!


Normally changing the battery solves this.Make sure you replace it with a good quality new battery and make sure it goes in the right way around as when you get in a flap it often ends up in the wrong way! ... Casio Exilim Zoom EX-Z700 Digital Camera

When i press the power button, the LCD shows a blank screen and the zoom lens is stuck or seems so. i have tried taking out the battery and leaving it out for a while then putting it back in but still not working


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Samsung L210 Digital Camera

I have a Sony DCR-TVR255E PAL camcorder which has been working fine until now - tried to use it at the weekend and the viewfinder and screen are completely blanked, just as if the lens cover is on, only of course it isn't! Any ideas? Thanks Pat W


If you are not able to see anything in view finder then its the problem with the lens assembly or with your CCD. \015\012\015\012this will need a service by the canon service center ... Digital Cameras

Power?? My camera turns on and the lens part extends out, but the screen is totally blank. When I switch it to view previous photos, it works fine..I just have to turn it "off" and the pictures come up..But if I switch it to take a picture, it goes completely dark again...it's almost three years old and has no damage done to it...


Had the same issue. I changed battery, I replaced Duracell by Sony rechargeable batteries. It works fine now. i think that the issue comes from battery shape. They do not have exactly the same. hope it helps. ... Canon PowerShot A510 Digital Camera

My camera worked fine one day, then it was in my purse. When I went to use it the light was on and the screen said there was a lens error. Everytime I try to turn it on now it makes a grinding noise and refuses to open and then closes completely with the lens error reading For no reason my camera (Nikon coolpix model S210) doesn't want to work with the term "Lens error" and lens won't come out WELL YESTERDAY MY NIKON COOLPIX s210 DIGITAL CAMERA WAS WORKING PERFECTLY FINE THEM I GOT UP TO TAKE P


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min. ... Nikon Coolpix S210 Digital Camera

Lens Stuck My Lens is stuck on my Coolpix S200 and I'm getting the Lens Error message. I tried to push it back in like I read on here and it went partly in and now its completely jammed. I've only had my camera for about 4 months. Please help!! I'm hoping to fix it myself. i dropped my camera and now the lens wont come out. Everytime i turn on the camera it tells me to turn it off then on again. I've done it multiple times and it doesnt work. I tryed to push the lens in and out but it doesnt ma


YOU CANNOT REPAIR THIS SOPHISTICATED CAMERA YOURSELF!!\015\012I guess pushing the lens inside may have made the problem worse.\015\012I follow a rule- if you drop an electronic equipment and a problem occurs- it usually takes a profession ... Sony Cyber-shot DSC-S700 Digital Camera

My camera worked fine one day, then it was in my purse. When I went to use it the light was on and the screen said there was a lens error. Everytime I try to turn it on now it makes a grinding noise and refuses to open and then closes completely with the lens error reading For no reason my camera (Nikon coolpix model S210) doesn't want to work with the term "Lens error" and lens won't come out


Hope you purchased an extended warranty. I've had two Cannon's with the dreaded lens error. Probably what happened was that while it was in your purse, somehow the power button got pressed. The camera powered up, tried to extend the lens, then str ... Nikon COOLPIX S200 Digital Camera

I have a Nikon Coolpix L14 and all of a sudden, when I turn it on, the lens moves in and out while making a strange noise until a "Lens Error" message comes on the screen. I tried replacing the batteries, turning it off and on, taking out the memory card, and cleaning the lens. The first time I replaced the batteries, it worked...until the next time I used it and the screen was completely blurred. Then, I had the original problem with the "Lens Error" message. I really don't think it is a conde


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Nikon Coolpix L14 Digital Camera

Lens stuck My camera won't register to open the lens. I don't know how it was before, but the screen is completely black and it won't take pictures. If I open the lens manually, the screen shows the image, but obviously I cannot take a picture with my thumb across half the lens. Is this fixable, or should I get a new camera?


Yes it is fixable. if there is a friction in the movement of the lense cover blades this happens. If it is due to fine sand or dust try using a soft brush with a rubber pump fitted at the back so that it cen blow the sand off the camera. The problem ... Fuji FinePix F470 Digital Camera

DSC-HX5, Lens is Stuck in Zoom out mode. Turn On works but screen stays black. Automatically turns off after 10-20 seconds.


... Sony Cyber-Shot DSCHX5 Digital Camera

DSC-HX5, Lens is Stuck in Zoom out mode. Turn On works but screen stays black. Automatically turns off after 10-20 seconds.


... Sony Cyber-Shot DSCHX5 Digital Camera

I have the Kodak C513, My cameras lens is stuck, everytime I turn it on my lens will not come out and on the screen it says lens error 20e,1,0,0 please help


Sounds like impact. Try putting new Good batteries in. If that doesn't work, you can contact Kodak to see where the local "authorized" service center in your area is, I know of 2 in South Florida.\015\012305-653-7355 ... Kodak EasyShare C513 Digital Camera

When I turn on my Panasonic DMC-FX55 the lens comes out fine and the screen displays for 2 seconds then goes blank except for the message 'Turn off then on again' - which doesn't work. The only way to get the lens to retract is to select 'Playback' - tun off then on . The playback mode works fine and after 10 econds the lens returns to closed position. Is their a combination of buttons that reset the camera??


... Panasonic Lumix DMC-FX55K Digital Camera

Screen Hi, My Nikon Coolpix s4 camera does not generate any image on the screen. I last used it 2 months ago. Then i kept it a a safe place and took it out again to find that the screen went completely blank when i start it. Although it displays the previously taken images stored on memory card, displays all menus, zoom works perfectly fine and the flash also works fine.


Get on to Nikon and let them know about it, it is a common problem with the S4. They are fixing the 3500 and others for free. \015\012\015\012 John. ... Nikon Coolpix S4 Digital Camera

Omgggg help me please im gonna die for this kodak camra ok well i was in borders book store and my friend wanted to see my red kodak easyshare m853 and as i was handing it too her we dropped it when the lens was extended and for the first 2 min after dropping it it worked fine i jus picked it up and went on than like 5 min later it said lens error 1,22,1,0,0 or something like that help other people said force the lens back in but when i try i can see the screen going to pop open and i dont wanna


Please don't die. Unfortunantly this fault needs to be repaired.\015\012\015\012Because the camera has been dropped KODAK might determine this fault as Out of Warranty\015\012\015\012An Out of Warranty repair for this model fo ... Kodak EasyShare M853 Digital Camera

Camera lens movement mechanism seems to be damaged, as when switched on, the camera lens does not extend out completely and the object appears blurred on the screen. Similarly when switched off, the lens does not retract back completely and it needs a manual push to put it in a little more. But even then it does not go in fully. Rest of the functions are working well. The damage is the result of an accidental body weight going on the camera, when it was in on condition.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Digital Cameras

Camera (FUGI FINEPIX S7000) turns on, but no image on screen. takes picture, but there is no image. started out with distorted image on screen, cleaned autofocus lens and it worked for a while. now its just a blank screen. everything else on it works, batteries have full charge


CCD failure image sensor failure ur camera may be on service advisory list just mail the fuji film with serial number i am pretty sure they will repair free of charge it is a manufacturing fault in some units manufactured b4 2005 u have ... Fuji FinePix S7000 Digital Camera

Dropped camera I dropped my camera very lightly now the lens are stuck. Is there any way to fix this without going to a repair? I just got this one week ago and the drop was so light. THe screen works it says Access though and then it says turn the camera on  & off i did this but it still doesn't help. But the menu screen & etc works. Please help, thanks!


Check this out\015\012\015\012http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Sony Cyber-shot DSC-W55 Digital Camera

When I turn on my Panasonic DMC-FX55 the lens comes out fine and the screen displays for 2 seconds but doesn't focus, it then goes blank except for the message 'Turn off then on again' - which doesn't work. The only way to get the lens to retract is to select 'Playback' - tun off then on, sometimes twice. The playback mode works fine.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\01 ... Panasonic Lumix DMC-FX55K Digital Camera

Brand new camera-switched it on- has a blank screen-its fully charged, its just got a lit blank screen and zoom lens only comes out slightly.,-im sending it back to where i bought it from but im concerned whether there is something i havent done to make it work. help. thanks so much


No...you have a brand new defective camera. Glad you're returning it. ... Digital Cameras

The lens does not pop out when you turn it on. Making a clicking noise sounds like it is stuck. Turns the camera off. On the screen it says lens error115,0,0,2129


Hello,Here are the steps:1. Make sure you will install a new or fully charged battery/batteries into your camera.2. Clean the battery contacts.a. Remove the battery/batteries and the memory ... Kodak Easyshare C813 Digital Camera

Stuck Lens I fell on my camera just recently and the lens is stuck open half way. When you power it on it moves a bit to the side and up, then to the other side and up and then beeps couple of times. You can view all the pictures and see the opening screen when you turn it on on picture-taking mode but it won't open up completely. Is it possible to fix? If so how?


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot SD400 / IXUS 50 Digital Camera

Lens is stuck and wont move. on the screen it states "Turn the power off and on again" help pls? Was working just fine and then started with the lens not opening...I opened manuelly and now it wont't take pics...I can view them on disc BUT it just says "turn power on and off" on the screen. Help!!!


I agree that the camera needs to be sent back when this happens.  I have seen people suggest pulling on the lens (a bad idea) and smacking the camera / rapping it upon something (an even worse idea).  Not only will these options often fail ... Sony Cyber-shot DSC-W170 Digital Camera

Coolpix P60 - had it hooked to tv to view photos - was working fine. Unhooked it and now the lens stays out - it retracts when you hit the on/off button, but the lens always pops out again. Cannot view anything (viewfinder and screen are both blank except for camera settings). Have changed batteries, put in a different memory card - nothing seems to work..


Hi,\015\012\015\012Please try to hook up at TV again and see if still functioning there. Then press |[]| to alternate between displays.\015\012\015\012It hope it will work.\015\012\015\012Cheers! ... Nikon COOLPIX P60 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3192 seconds