Having problems with your Olympus FE-320 Digital Camera ?

My Olympus FE-320 will not focus. When I turn the camera on, lens extends and retracts a couple of times, camera beeps and turns off. If I press the review button while the lens is extended, I can see old pictures then switch to camera and see a live screen, but out of focus. If I try to zoom, camera beeps and turns off. Sounds like others have the same problem with this camera.


Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Olympus FE-320 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Olympus FE-320 will not focus. When I turn the camera on, lens extends and retracts a couple of times, camera beeps and turns off. If I press the review button while the lens is extended, I can see old pictures then switch to camera and see a live screen, but out of focus. If I try to zoom, camera beeps and turns off. Sounds like others have the same problem with this camera.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Olympus FE-320 Digital Camera

My Olympus FE-320 will not focus. When I turn the camera on, lens extends and retracts a couple of times, camera beeps and turns off. If I press the review button while the lens is extended, I can see old pictures then switch to camera and see a live screen, but out of focus. If I try to zoom, camera beeps and turns off. Sounds like others have the same problem with this camera.


Before sending this camera for a repair, Please make sure the focus setting is not set to "macro mode" (flower shaped).Just a thought.Regards,Waqar ... Olympus FE-320 Digital Camera

I have a canon rebel xsi that is not taking pictures on auto focus. It will take pictures on manual focus, but they're blurry. I changed my lens to a bigger one to see if it was the lens or camera, and it's the camera. I had the same problem with the other lens. I've tried cleaning it & turning the lens focus ring but is still doing it. Anyone know how to fix this problem?


Try cleaning the lens contacts on the camera body and on the lens.This maybe the problem, it is not making contact with the lens zoom motor. ... Digital Cameras

Is there any way I can get my camera back to normal! I turned it on and it said "focus error". When I shut it off to see if it would start over correctly it would not close the lens. I turned it on and the lens closed and then opened again and wouldn't focus. I turned it off and the lens won't shut. How weird is that? It obviously is capable of opening and closing but seems to be reversed and makes a funny noise when it can't shut at the right time. Can I wiggle or giggle something? I bo


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Digital Cameras

Lens error when trying to power on camera. no dirt in lens. lens extends buzzes retracts and turns and then repeats before fully retracting. Can see camera focusing while cycling and retracting. lens error appears on screen at end of cycle. tried tapping camera and lens body to dislodge dirt as well as compressed air on lens body without success. any ideas?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Nikon Coolpix S210 Digital Camera

My Pentax Optio M60 lens seems to be frozen half way out of the camera with the lens cover also partially open. When I turn in onn it sounds like the lens is trying to focus then turns intself off. Nothing is written on the screen unless I also press the menu button which displays VER 1.00 before bleeping three times and turning off or the green button which displays VER 0163A SBM -FIRM before beeping 3 times and swithcing off. Nothing else seem to do anything. I havn't dropped it or got the cam


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will hav ... Pentax Optio M60 Digital Camera

Hi I have a Samsung L100 Digital camera. I was using it last night to make a movie, I finished the movie and than viewed the movie when I was done. I pressed the button to turn the camera off, well the lens stayed out and didn't retract and now when I try to turn the camera on the blue light comes on and than it beeps 3 times and turns off. I've checked the battery life and its full, right now I have it charging to see if anything changes >.> but I don't think it will. If you have any input it w


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Samsung L100 Digital Camera

Focusing Problem I have a Casio Exilim 10.1 Mega Pixel Digital Camera EX-s10 and I have had it for a little over a year now. I dropped it in sand and the lens would open then beep then close on its own. It stopped doing that and started working though in about 2 days, but now the focus isn't focusing. When I turn on my camera the image on the screen is blurry. What should I do?


Hi, if you can open your camera and remove the lens unit assy(just be carefull to the flat cable its easy to be broken) you can clean by yourself just to remove the sand goes inside of the lens unit and also to the gear.make it sure you need to use m ... Casio Exilim Card EX-S100 Digital Camera

I have two olympus 1010 camera's. Both have been dropped. The lens is patially open and the cover not fully closed. One will turn on so you can see through the LCD but only the top third of the field is visible. When photos are taken that is what shows up. Also it tries to focus but can't get it clear. The second powers up with information on the LCD but instead of seeing through the camera you see black. Phots can be taken but they too are black. What is wrong and what can be done to fix them?


I'll cover these separately:\015\012\015\012First camera may be as simple as the cover blocking part of the image, or it could be that part of the sensor is damaged. Sensor is the part inside the camera that light hits and converts to vo ... Digital Cameras

My Nikon Coolpix S203 has a "lens error". Every time I turn on the camera, then lens goes crazy, moving in and out and zooming in and out of focus, all the while making a beeping noise. It then retracts back into the camera and the message "Lens error." appears on the screen. Please, is there anything I can do to fix this? Thank you.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Nikon Coolpix S203 Digital Camera

Olympus C-5060 - has had a melt down with continual beeping and has lost focus. It also doesn't switch off even when the dial is turned to off. The lens does not retract when turned off. I had it in super macro MF just prior to this happening. It has been a great camera and I'm not ready to give up on it! Are there any camera gurus out there with some ideas on what to try?


... Olympus Camedia C-5060 Wide Zoom Digital Camera

My samsung nv24hd has had its lens stuck open, so I got it to closed carefully. Now whenever I try to turn on my camera, the lens will not open. The screen says samsung, and it freezes. I am able to see the pictures and videos on my camera, but I can't take pictures. It either beeps 3 times, or it freezes with the samsung logo on the screen. Is there anything I can do?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Digital Cameras

Coolpix 230 Lens Error. Lens moves in and out but not sure it's focusing. Beeps and buzzes while moving lens in and out, then srops with Lens Error. Took it apart and I see 2 square, flat copper coils in the lens compartment. One of them has black streaks on it--maybe shorted? Can that coil be replaced and how or is this camera trash?


Taking your camera apart without the knowledge to do so probably has "trashed" your camera. You could have tried these:\012\012 ... Nikon COOLPIX S230 Digital Camera

Lens stuck Please help me, I tried to turn on my camera today (it had been working fine before) and when I tried to switch it on the lens would not fully it open and my camera was making a whirling noise. The screen is black and will not take photos. The lens won't open fully and when it does eventually close has difficulty doing so. The camera then makes a beep beep beep noise and displays "Please turn the power on and off again". Please help I can't live without my camera and can't afford


If the lens is not coming out, its stuck, or it wont completely open or close, that is the lens assembly, that needs to be repaired. You need to take it to somebody, that can either repair it or replace it for you. There is nothing that can be done, ... Sony Cyber-Shot DSC-P8 Digital Camera

Work issues my camera makes 3 beeps then shuts off !!!!!! I tryed to use gentle pressure with the camera face down on a towel covered table and turn on to see if the camera tries to retract the lens. it still wont work!!!!!!!!! AHHHHHH SAVE MEEE!!!!!!


Jammed or off the track, try rotating the lens if it rotates out, maybe the middle coller part, or take it apart and see if you can see the fault. No other options, sorry. SO many lens problems with this design, too bad. ... Samsung Digimax S500 Digital Camera

When power button is pushed, the lens tries to extend but only starts to open the lens cover blades, then fails, beeps about 8 times, monitor turns on briefly then off. This started out with camera failing to focus and sometimes powering off without retracting the lens


... Olympus C-7000 Zoom Digital Camera

Ok so i am turning on my camera (an Fe-340) and the lens go in two or three times then when the screen finally does come on it is blurry and way out of focus, also when i attempt to adjust the zoom the camera turns itself off, if i attempt to turn the camera off using the power button it goes off but the lens does not retract.All other functions on the camera are operating correctly to my knowledge i can even take a blurry out of focus picture, view it in display mode or even transfer it to my c


It may be something more serious, but the problem you describe is\015\012frequently due to corrosion on the battery contacts inside the camera. \015\012Remove the batteries and wipe the camera contacts firmly with a clean\015\012cloth (heavy corrosio ... Olympus FE-340 Digital Camera

Stuck Lens I fell on my camera just recently and the lens is stuck open half way. When you power it on it moves a bit to the side and up, then to the other side and up and then beeps couple of times. You can view all the pictures and see the opening screen when you turn it on on picture-taking mode but it won't open up completely. Is it possible to fix? If so how?


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot SD400 / IXUS 50 Digital Camera

There appears to be dust in the lens because when I look at the screen I can see a little dot in the middle. Also it makes a weird beep sound when I turn it off and sometimes the lens will not go back in the camera.


Yep, you have dirt / grit inside your camera. It would be best to stop using it now to prevent further damage. Then contact a local camera shop that is able to disassemble your camera enough to get the dirt removed from the interior of the camera, ... Samsung S860 Digital Camera

My new Canon G11, purchased in August,2010: 1) The camera cord (to load photos from camera to computer) is no longer interfacing, but the card works (I don't think it is the software as it malunctions on both office PC and home Macpro). Also noticed that sometimes when trying the cord, when I turn camere on, the lens comes out, which never happend when transferring photos via cord 2) I noticed shortly thereafter that the camer no longer "beeps" when the green in-focus boxes appear on hte view


It sounds to me like one or more of the wires in the cord has broken, or there is a problem with the USB port on the computer. Try swapping to the other ports to see if the problem goes away before going forward.If the problem is present ... Canon PowerShot G11 Digital Camera

Help The last time I used my camera a maybe a week or two ago, it shut off because the batteries died and the lens never pushed back in. So, I just now went to turn it on after putting in new duracell batteries in, which I have used all different kinds in my camera, I have it sent so that the Samsung icon is on as it starts up. So that came on and after a second you can see on the LCD screen but it is blurry and after a few seconds I hear 3 loud annoying beeps and then it shuts off. What could b


The 3 beeping sound as ou call it annoying means that the camera has low battery capacity. the lens is stuck out because there is incorrect battery connection. there is an option on the camera setting for the battery type. try this one:\015\012 ... Samsung Digimax S630 Digital Camera

Whenever i turn my i533 digi cam on, the lens pop out and i can see the green light blinks. However, the LCD has no display and i hear 3 beeps. The camera would automatically shuts off, but sometimes it wouldn't, leaving the lens out


You've got to clean the contacts on the battery, the battery compartment and you charging station. This can easily be done using a Q-Tip "dampened" not soaked, in rubbing alcohol. Clean them all well and then if you can find a drinking straw blow dry ... Polaroid I533P Digital Camera

There are several problems with my camera one of them is the fact in that Every time i turn on my Lumix 10x mega pixel camera the lens won't focus it also won't let me take any pictures. When i turn the camera off the lens won't go back into the camera but when i turn it back on the lens gos in and then out again. There is one more problem whenever i go to look at the pictures on play i can look through a few before its says "please turn camera off then on a again" it also says the same message


OK, if there is sand in the camera, the gears will bind or stop causing the error that you described. I think it needs to be taken apart and cleaned by a service center before using again. Or you could buy a spare caemera to use on your family holida ... Digital Cameras

I have a kodak easyshare V1003 .. my camera went dead with the lens out and when i got it charged the lens would not go down.. the camera does turn on and take pictures.. but the focus is blurry.. and it will not go down what do i do? is there something i can do to get the lens down so i can focus my pictures and when i try zooming in the camera turns off. please help


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Kodak EasyShare V1003 Digital Camera

The lens is open when the camera is turned off. when turning the camera on, the lens reclines and then comes out again with a beep- beep, and the E18 error is shown. The camera turns off in about 5 secs.


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SD400 / IXUS 50 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3928 seconds