Having problems with your Olympus FE-340 Digital Camera ?

Olympus FE-340 camera i turn on the power the lens goes in and out 2 or 3 times and the view is blurry in the view finder. The zoom feature has no effect when pushed to the wide setting and will turn off the camera when pushed to the tight setting any clue?

Answers :

Your lens may be damaged...your zoom assignments may need to be realligned if there are no broken parts. If there are broken parts in your lens it may be better to get a new lens
Repair Help & Product Troubleshooting for Olympus FE-340 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Olympus FE-340 camera i turn on the power the lens goes in and out 2 or 3 times and the view is blurry in the view finder. The zoom feature has no effect when pushed to the wide setting and will turn off the camera when pushed to the tight setting any clue?

Your lens may be damaged...your zoom assignments may need to be realligned if there are no broken parts. If there are broken parts in your lens it may be better to get a new lens ... Olympus FE-340 Digital Camera

FLASHES C:13:01 When I turned the camera on, I looked at monitor to take picture and was flashing C:13:01-wouldn't take a picture. Shut camera off, turned on and got two pictures off. That was it. By shutting camera off and on was able to get to the review setting and viewed the 80 pics. stored; that was yesterday. Today I get the c:13:01 code on each camera mode and review setting only shows the 2 pics from yesterday, then blue screen, though as I push the review button the on screen picture nu

OMG!!! If you still have the camera, try this. I read in one of these forums to spray a burst of brake cleaner in there and blow dry for a few seconds and believe it or not, it worked! That's after me taking it apart to make sure the connectors weren ... Sony Cyber-Shot DSC-P200 Digital Camera

Camera Frozen When I turn on my DMC-FX07 none of the buttons work. The zoom doesn't work, the menu button doesn't work, the flash settings dont work. It won't switch from current picture when in viewing mode. I have tried all the picture wheel settings and every one is frozen. I have trie pushing and holding every button and removing and replacing and recharging the battery several times. When I replace the battery the autofocus works but then it freezes (when in heart mode) with the backli

Hi,I tried Option No.1 successfully when my Panasonic DMC-FZ7K froze once:Option No1:1. Try turning the camera on with the battery inserted.2. Now remove the battery while the camera is on. ... Panasonic DMC-FX07 Digital Camera

I have a Canon XTi that I can't use because when I push the shutter button a 9 with a green blinking light shows up on the right hand side at the bottom of the viewing window. I've tried turning the camera off, changing the batteries, resetting the camera's settings, nothing has worked. Please help!

... Canon EOS 400D / Rebel XTi Digital Camera

Lens Error I have a Nikon Coolpix S9 and when I turn it on it says lens error. If I push the shutter button while turning the camera on, it won't say lens error but then nothing works. I can't take pictures, change my settings or view pictures. Can it be fixed???

I had the same problem with lens is blurry and lens error message comes up. My solution might sound sillys but it works. tapping on the side of the camera, put some force to it.(with hands only). ... Nikon COOLPIX S9 Digital Camera

The camera won't turn on. But in its dock I can get a screen to set the date and view a slide show. Outside of the dock pushing the power button does nothing.

Yeah one would assume battery in this unit is not working like it should and may need replacment, or your flash capacitor inside is not filling with charge to power unit off the dock. Ether way here your going to need to have this fixed.\015\01 ... Casio Exilim EX-S880 Digital Camera

My Cannon Power Shot A520 Camera will not power the lens up when I turn it on. I get the message "No Image" on the viewing screen, but nothing else happens. Back Switch is set on camera symbol, but camera acts like it is set on view. I have installed new batteries and battery terminals are clean.

The camera may need a software update which can be done through manufacture for $50 or you can downlaod an update from their website and follow the directionsOr the zoom may be dirty or debris is stuck in the zoom lens and needs to be blow out ... Digital Cameras

When i turn on the camera the lens wont pop open even when the battery is fully charged.... i was taking pictures and it working fine turn the camera off and on again then the lens wont open anymore? i can still view all the pictures i took from the camera but cannot take pictures anymore coz of the lens wont open. i tried initializing the camera by going to set up it didnt work..msg error said turn the camera off and on again and i did but didnt work either many times i tried please help thnks!

The problem is\015\0121- some dirt somehow got on the outside of the lense. After it was retracted fully in, it prevents the camera from opening again. When you turn it on, if it opens a little bit, try to pull it out NOT too hard and let go ... Sony Cyber-shot DSC-N2 Digital Camera

Lcd blurred I have a canon power shot a80 and when i turn it on and try to take a picture, on the LCD display i see a mixture of colour which is not even letting me see the image of the picture i would like to take. If i look through the lens and take the image, i am still able to view the picture I had taken if i set the camera on the view pictures. The mixture of colours on the LCD only shows when the camera is set on take the picture... and it doesn't even do it always. Thanks.

Canon will fix this camera if it is in the list of ccd defect. Contact canon.com for the Americas, or where you are. Call Service on the web page with the 800 number.http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&am ... Canon PowerShot A80 Digital Camera

Lense problem When i turn the camera on in picture taking mode the lense does not come out all the way and if i push it again it still does not come out and then when i push the power button a third time it closes the little bit it opened... but not all the way. However if the camera is in play mode and i turn it on, the lense comes out all the way just fine... then goes back in on its own and i can view the pictures. Because of this it appears the mechanism is working fine but there is maybe

Dear jmgrev,\015\012\015\012Whenever you turn your camera on and your lens doesn't go in and out properly you are likely experiencing a lens error of some sort. Look for an error 18 or a "lens error restart camera" message. If either of t ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Negative effect. I've had my Canon Powershot S3 1S for over a year now. The other day I was taking pictures and it was working fine. I turn it off and set it down. I come back later, turn it on again and the screen shows has white lines that keep flicking over it. I turn it off and take the batteries out. Later I put the batteries back in, turn it on, and find that it is in negative effect. I'm pretty sure that my camera can't do this naturally and I've tried everything to see if I could get it

Have you tried resetting it to factory settings. if no please do it.(refer manual)but if yes please contact us again ... Canon PowerShot S3 IS Digital Camera

After taking some pictures I wanted to delete them. Instead of hitting the MENU button I hit the SET button and a red light came on and was flashing. I pushed on the OFF button to shut the camera off. It would not shut off.So to shut the camera off I opened the battery door and the camera shut off. I went to turn the camera on and will not come on. I changed batteries still will not turn on. WHAT DO I DO??...JERRY

Hello Jerry, First make 100% certain that the battery is charged, also that you dont have a bad connection.The S2 has a small cell battery for storing the date/time ect under the battery flap, try removing and re-inserting it, but ... Canon PowerShot S2 IS Digital Camera

When turning off my D90 I have on the control panel showing ISO 1.0 in parenthesis and the letter K to the upper right of the 1.0 this remains on when the camera is turned off. I have tried everything that has to do with this setting and cannot get it to go away when turned off. Pulling the battery is the only option so far even going back to default settings has no effect....help

I'm assuming it's actually on the lower right corner. It's supposed to stay on, even with the camera turned off. All it's doing is telling you that the memory card still has room for a thousand more pictures.The power drain is so minimal ... Nikon DSLR D90 Digital Camera

Kodak easyshare z712IS. sounds like a typical problem but...I try to turn it on, lens only comes out a little bit, then it turns off. I replace the batteries and the set time and date comes on...I set time and date camera turns off. I CAN in fact view pictures in the gallery but as far as taking pictures....nothing.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare Z712 Digital Camera

The camera is 2 years old, when turning on the power it goes to the date set,you can change the year, then it slides over to the month, but seems froze up, then the camera resets itself, if you skip the date set up, it shows a view on the lcd, but can't take a picture, and the camera resets again. My son borrowed it and took pictures snorkeling, so it may have gotten wet, but the lcd screen is not distorted as it was a year ago when I got water in it.

... Olympus Stylus 770 SW Digital Camera

I have a Minolta Dimage 7Hi and get a 'card error' message when I turn it on, in the middle of the viewing screen. The camera acts like it takes a picture without the button being pressed, then the red light next to the card goes on and off for about 10 seconds. Then the camera shuts down. It repeats this when I turn the camera back on and doesn't respond to any other settings or button pressings. Can you help?

Format CF memory card to FAT16 - 7hi does not recognize FAT32 nor NTFS ... Konica Minolta DiMAGE 7Hi Digital Camera

I turn the camera on, the Canon image comes up along with various icons, but there is no picture in the viewer - and when I take a picture I get nothing. It's like the lens remains covered. Is this a setting that is somehow changed? I reset - but no change. I can view pictures on the card, so it's not the display. I can also view settings - just not any picture.

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera

The view finder or screen are black. The lens moves out when the camera is powered on, I can hear the shutter click when pushed; the telephoto is moving; I have all the settings show on the screen when the camera is powered on but I cannot see anything through the view finder or on the screen and no image is captured when a pic is taken. I changed the batteries and it made no difference.

I know it may sound like the shutter is moving, but you're going to have to actually look down the lens barrel to confirm it's actually moving, and not just producing a sound effect from the camera. Also keep in mind Canon's SX IS series cameras are ... Canon PowerShot S3 IS Digital Camera

How do I format a new SD card? I push Set and then OK/Menu key, it says please wait and then card error! comes up on the screen. If I push cancel first then the camera shuts off. Also the lense cover does not open when I first turn the camera on. The card is a SanDisk SDHC card 8GB

... Sea and Sea DX-860G Digital Camera

Settings when I turn my camera on its side to take a photo I get wide black borders I hve reset camera back to manufactureres setting but that did not change it

Turn on the camera and select the MENU buttonClick the RIGHT arrow (to the Wrench/Hammer icon)Click the DOWN arrow - scroll down to AUTO ROTATE.Try setting that to OFF.Does this help? ... Canon PowerShot S3 IS Digital Camera

When turning on the camera I see in the view finder purple lines, not the subject I want to capture. Is there a way to set the camera to the original default settings?

Yes, its known problem of ccd imager IC in Canon S1 model camera and Canon will replace ccd imager IC free of cost.Click ... Canon PowerShot S1 IS Digital Camera

The camera keeps saying "Focus Error" every time I turn on my camera. It does not allow to take pictures nor record video. But I am allowed to view recordings and pictures. I also am able to view the menu and settings. How can you assist me?

Hi,this is a lence problem you should try well servise of your camera and must be change the lence flap ,then you are sure get results ... Fuji Finepix Z20fd Digital Camera

Canon xt When I try to shoot sports at night under lights I am having difficulty getting my camera in maunal mode without having bulb mode as well. How do I turn bulb off? I am setting my ISO at 1600 and pushing my f-stop as low as I can go, am I doing something wrong? It worked once for a recent football game but again last night shooting soccer could not get the bulb setting to turn off.

First of all, shooting sports in manual is about the most difficult thing you could ever choose to do. I use the Av (Aperture Priority) and let the camera set the shutter speed. Just set your aperture wide open and fire away. That way, you're not con ... Canon Rebel XT / EOS 350D Digital Camera

I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.

... Panasonic Lumix DMC-FZ28 Digital Camera

Three days ago, I put new batteries in my camera, and turned it on. everything worked fine. I put it away, and the next day it would not turn on either by sliding the front cover, or by pushing the quick view button. I replaced the batteries again, with the same result. Is my camera dead?

Hi,Make sure you have the Correct Batteries. Pull out the Battery for Few Minutes, say 15 Minutes. Keep the Camera as it is for that long. Put the Battery Back in and Check, if that have resolved the Problem.If not, then Take ... Olympus Camedia C-350 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5538 seconds