Having problems with your Olympus FE-340 Digital Camera ?

The lens on my camera won't go all the way back in, it just keeps going in and out, and my camera won't turn on.. when i press the power button the lens just goes in and out and then stops in the middle

Answers :

Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Olympus FE-340 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The lens on my camera won't go all the way back in, it just keeps going in and out, and my camera won't turn on.. when i press the power button the lens just goes in and out and then stops in the middle

This\015\012 is such a common fault that I hope you don't mind me pasting my stock \015\012generic answer below. No point in reinventing the wheel! ... Olympus FE-340 Digital Camera

The lens on my camera won't go all the way back in, it just keeps going in and out, and my camera won't turn on.. when i press the power button the lens just goes in and out and then stops in the middle

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Olympus FE-340 Digital Camera

When you press the power on button the camera lens starts to move out stops goes in then out again stops the screen does not illuminate at all.IF you then press the power button the lens tries to retract slightly but then stops and again nothing else happens. battery is fully charged. if you press the replay button screen and camera behaves as normal and you can view the pictures taken lens usually retracts all the way to its docked position again if it was nearly all the way out.

... Sea and Sea UNDERWATER DIGITAL CAMERA DX-1G Scuba Gear Cameras

My ex Z1000 wont take pictures. i turn the camera on the lens goes in and out some times it looks like its going to let me take a picture and then the lens closes back into the camera and the screen goes black. It looks like the cameras off but I push the play button on top and it lets me view pictures. I don't think its the lens because the lens seems to open and close fine. Ive only used this camera 3 times and it has been stored safely so Im not sure what happened. It will only let me get int

Your camera problem has the problem chance. Fisrt you should try with full charge battery. sometime weak battery cause also. Second main pcb does not resetting every time after taking picture.\012I hope you luck! \012Would you give more detail pr ... Digital Cameras

The function button on my d40x i think is sticking because when i turn my camera on the self timer keeps flashing and when i try to access the menu or any other functions like playback it wont allow me the only thing i can think is that the function button by the lens is sticking hints the reason it is flashing and wont stop is there a way to fix this?

Since you can't get into the menu, let's try a manual reset. Remove the card and the battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Nikon D40x Digital Camera

HELP HI I dropped my camera for the first time. Now the lens wont go back in. If i press the play button it goes to start back up then i get 3 low beep the green light is flashing and then it turns off. I just got this camera this past Christmas. Please help what can i do???

This happened to me once. SOMETIMES you can correct this yourself. The lens must be extending from the camera at EXACTLY 90 degrees if the lens is crooked, then straighten it, gently! If you succeed, the lens may retract as it is supposed to. You ... Polaroid i733LP Digital Camera

Camera malfunction when press power button on camera, lens wont come out, it makes 3 loud beeping noises then goes off, have inserted new batteries but this as not helped

Mine is doing exactly the same arrrrrrrraaaaaahhhhh ... Olympus SP-350 Digital Camera

Pushed in the lens and now when i turn it on it wont come out. i opened the camera to see if i could fix it. it came out by forcing it manually. still when i press on button, the small motor goes on but the lens doesnt work

... Casio Exilim Card EX-S100 Digital Camera

My Samsung ES25/27 Camera wont come on. Put in new batteries, if I press the power on button it comes on green but nothing happens & light goes out if I stop pressing?

... Digital Cameras

Sanyo VPC-E760 Please can you help me. My camera is practically brand new and all of a sudden it wont turn on. When I press the power button, the blue power light comes on and then it starts flashing and goes of again. The screen however does not come on at all and the lens does not open. Please can you help? E mail [email protected]

The USB cord does NOT charge this camera, you have to take the battery OUT and place in in the charger that comes with the camera. If you do not have a charger, you can buy one on-line for about $20.00 ... Sanyo VPC-E760 Digital Camera

Olympus SP- 550 UZ , Model number Sp -550 UZ, L 08208054 UO 18x optical zoom - 28mm wide, Digital Camera DC 6V As soon as the power button is pressed, the screen lights up the lens comes out with a message "Zoom Error" and the lens immediately goes back into the camera. I can also hear light clicking sound as the lens goes back into the camera. This problem has been going on occasionally and then I could see the object to be photographed. Now for the last few days I am unable to take any pictur

... Olympus SP-550 UZ Digital Camera

The battery ran out and I was not able to recharge for a couple of days .The camera never shut down the lens still stayed out of camera body even when the battery was taken out. After recharging battery and reinserting it in the camera the camera will not function. When the power button is pushed the light goes on and the camera makes attempts to close lens but then it buzzes and makes beeping sounds and then goes off.

Hi,Unfortunately, this is a common problem on this model. Yet, no resolution other than getting it repaired.There are a number of things you can try:1. Ensure batteries are fully charged2. Look ca ... Olympus FE-200 Digital Camera

EX-S500: * I turn it on and the 'Adjust' screen comes up. *I press the 'Menu' and the lens comes out, the green light flashes for awhile, it beeps a few times, it grinds a few times and shuts off. The lens stays out. *I turn it back on, the lens goes back in and the 'Adjust' screen comes on. * I press the power button and the camera goes off. *I left the camera in the charge gradle all night and the battery did not charge. *Help

You could have a power and lens issue, going on at the same time here. There's a couple of web blogs that delineate things you can try to correct these issues, and here they are:\015\012 ... Casio Exilim EX-S500 Digital Camera

Hi there, I have panasonic lumix fx12, the camera was working fine till suddenly i saw this msg "please turn off the camera and turn it on again" when i turn it off the lens does not goes in and when i turn it on the lens goes it and comes out again but as soon as i press the capture button again the same msg appears on the screen and again the same story, I can hear a little noise from the lens for a few sec too! Could any body help me on this please!!!!!!!

Some say that this could be because the lens is out of alignment. See here: http://www.digitalcamera-hq.com/products/panasonic-lumix-fx12?dj=1&ratings=1 ... Panasonic Lumix DMC-FX12 Digital Camera

When I push the power button, the lens cap comes out and on the screen is a very brief shot of what the camera is aimed at. The camera stays engaged for one second and the lens cap goes retreats back into the camera and the power goes off and nothing is on the screen. This happens after the battery has been fully charged also.

Try to remove the rechargeable battery and use a battery of the same \012type but an alkaline like the energizer. Sometime rechargeable battery \012malfunctions that it seems fully charged but actually is not. If the \012camera continue to power on w ... Kodak EasyShare M1093 IS Digital Camera

Hi I my new(3 months old ) PowerShot SD1300 IS camera has a problem. Initially worked fine ,but suddenly it is not working. Issue is it will power up only once after many (5 to 6 hrs) put idle.When powerd on , lens will come up and the camera will go of,lens will remain out.It wont respond(power led also goes off).Again if we put idle for some hours when we press first lens go in ,comes out and again goes off. Please let me know what could be the problem.I checked it is not problem with battery

Hi. I\015\012 note that you have checked the lens and Canon service has said the PCB \015\012needs to be replaced, but the cost is too high. However you have asked \015\012if there is anything else you can do. ... Canon Digital Cameras

I have a flip Ultra HD 2nd gen model: u2120B. I bought it off of eBay, broken. The buttons don't work. The camera is seen by the computer when plugged in. I can format the camera HD and reinstall the software. No change. When I turn the camera on, it goes directly into setup, prompting me to select a language (English). I push all of the buttons and nothing happens. The only button that does anything is the power button. I have taken other flip cameras apart and replaced the LCD, lens, res

... Digital Cameras

I have a HP camera CW450t camera and cannot turn it on with the power button on top. I know the batteries are good because I can turn on the camera with the review button and review the pictures that I have taken. When the power button is pressed the green light on the back of the camera flashes but the lens does not come out and the led screen does not come on. when you take your finger off of the on/off button the green light goes off as well.

Had the EXACT same problem with the CW450 model. I called support because I was mad and wanted it replaced. The support tech helped me through the issue. The answer is- NiMH. Alkaline batteries are unstable and not powerful enough for use with this c ... HP Digital Cameras

Camera error hp photosmart 935 digital camera shows this error: stderr error 19 zoomzebu cpp rev 43 line 919 The lens does not zoom, the camera does nothing. I get the same. error 19 message on my camera. The solution given of pushing the middle button to right of screen while pushing the okay and V button.... I don't know what the V button is. I tried several different buttons with no luck.

Your lens is not communicating properly .It is stuck it is due to mechanically problem you are having this error. ... HP Photosmart 935 Digital Camera

Camera error hp photosmart 935 digital camera shows this error: stderr error 19 zoomzebu cpp rev 43 line 919 The lens does not zoom, the camera does nothing. The solution of pushing the middle button the okay button and theV button didn't help, because I don't know what the v button is. I tried pushing several random, and nothing worked.

That is a faulty zoom unit, unless it reset by removing the beatteries, this problem cannot be fixed with home repair.You need to contact HP, if they acknowledge this is a factory defect, you may be entitled to free replacement.See ... HP Photosmart 935 Digital Camera

Lens error message, bells, and lens goes in and out and stops out. Remove and replace battery and press play and get picture, press camera and lens goes out and LCD works for a few seconds and then goes dark. No way to retract lens except remove battery and reinstall and press play then battery out.

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Casio Exilim EX-S500 Digital Camera

Cybershot dsc-w100 well actually my camera is a cybershot dsc-w100 and when i push the on button it says access but after that it goes to a mode where it says turn the power on and off again and i turn it off but still does not work. as i do this the lens goes in and out like three times and when the camera is off the lens stays out

If you cannot find a solution to your problem you may want to email [email protected] He has good advice and good used parts at a fair price. ... Sony Cyber-Shot DSC-S40 Digital Camera

My D80 suddenly stopped taking photos while I was in Auto mode. I noticed the flash stopped releasing. I've changed lenses, reset the camera's green buttons, switched out the card, reset the clock. It will occasionally take a photo, not necessarily in focus,and the flash will on occasion pop, but I can't figure out what the correct triggers are. Can anyone help? Lens is 18-135mm. Set Lens in in "A" and camera is in "AF"mode. Thanks much.

Hi, Also, try a factory reset found on page 129 of the manual. On the left side of the camera is the terminal cover, inside below the USB connector is the reset switch. If that does not work call Nikon digital 1-800-645-6689. ... Nikon D80 Digital Camera with 18-135mm Lens

My camera suddenly stopped focusing. Also the lens in front jams slightly when the camera it turned on. When it is shut off the lens goes in, but then pops back out and goes in.

The battery is probably flat, recharge the battery and try it again ... Sony Cyber-shot DSC-W55 Digital Camera

The camera was working fine until I purchased a pack of kodak rechargeable batteries. After a week or so of using them my camera stop coming on when I would press the power button, it would make this beeping noise and the lens wouldn't extend. After continuously pressing the power button I got it to come on but again the lens did not extend and the screen was frozen. Why am I having this problem and how can I fix it?

Having gone over a month with no response, I assume this is no longer a problem. ... Samsung Digimax S600 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4185 seconds