Having problems with your Olympus SP-350 Digital Camera ?

While connecting the camera to the PC , the image is being locked atomatcally. and I tried it with switching it on/off, now it is not allowing me to power it on, even after I disconnected it from Pc now.


Answers :

Always use the "safely remove hardware" icon at the bottom right of your computer screen. Try this...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. If that works, in the future, do what the pros do...use a card reader to download your pics.
Repair Help & Product Troubleshooting for Olympus SP-350 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

While connecting the camera to the PC , the image is being locked atomatcally. and I tried it with switching it on/off, now it is not allowing me to power it on, even after I disconnected it from Pc now.


Always use the "safely remove hardware" icon at the bottom right of your computer screen. Try this...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. If that work ... Olympus SP-350 Digital Camera

My camera was dropped accidentally while capturing a image. After that i switched off and when I switched on for next snap, display shows access and after few seconds a message appears saying" Turn the power off and on again" I did this several times but no effect and even i removed the battery and inserted back still no use. Please help.


I am a technician who repair any electronic devices, i repair digi cam a few hours ago, foreign object or dust is not the cause of that error, digi cam has 3 lenses, 1 is outside lens, 2 is is the swinging lens and 3 is the retractable lens,... do no ... Sony Cyber-shot DSC-W55 Digital Camera

I have an Olympus u700. It worked ok yesterday, then stopped. I switch on the power and the lens comes out about half way, I get blurry images and then the lens closes again. The screen then displays the following: D: 5f08 5e02 It doesn't allow me to do anything, other than turn it off. Any ideas? Thanks Chris


... Olympus Digital Cameras

No power I purchased a Canon 400D about a year ago and shortly afterwards the camera suddenly gave up on me. I took a couple of photos and then nothing. The battery was fully charged and the power light came on when the camera was switched on and remained on even when the camera was switched off. I was going to take the camera in to a service centre a few weeks later for repairs but when I switched the cameraon again, the problem seemed to have disappeared. Since then I have been taking photos w


This definitely looks like an issue with the Camera. I suggest contacting the Camera Tech Support immediately and request them to send the Camera to the service center. There are more Canon Rebel XTi owners, including me have experienced no-power iss ... Canon EOS 400D / Rebel XTi Digital Camera

I dropped my Canon sd1000 and now the mode switch wil not allow me to see images that have been taken nor does it switch to movie mode. Images are shown as I take pictures and immediately after. Their doesn't appear any stops on the mode switch, Short of sending it back to Canon is their some other fix?


Unfortunately there is no easy fix, the mode switch has been damaged or there is a crack in the systems control board where it is solded to, the only option is a Canon repair station. ... Canon PowerShot SD1000 Digital Camera

Have the Nikon D90 camera and it does not allow me to take pictures when ever I want. It is in full auto mode and just does not want to take the picture even in bright day light. The F keeps on blinking in full auto mode and even if I switch to manual mode it does not allow me to change settings. It is very frustrating! what is wrong with this D90??


The blinking F-- means that the camera doesn't think a lens is attached. You can try removing the lens and re-attaching it. Or if you have another lens, try that. There are quite a few reports of this issue with the 18-135 kit lens. ... Nikon D90 Digital Camera with 18-200mm lens

Lcd blurred I have a canon power shot a80 and when i turn it on and try to take a picture, on the LCD display i see a mixture of colour which is not even letting me see the image of the picture i would like to take. If i look through the lens and take the image, i am still able to view the picture I had taken if i set the camera on the view pictures. The mixture of colours on the LCD only shows when the camera is set on take the picture... and it doesn't even do it always. Thanks.


Canon will fix this camera if it is in the list of ccd defect. Contact canon.com for the Americas, or where you are. Call Service on the web page with the 800 number.http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&am ... Canon PowerShot A80 Digital Camera

I can't seem to get my autofocus to work on my new Canon T1. The mode dial is switched to full auto, the fous mode switch is on AF, and the Image Stabilizer switch is in the "on" position. When I depress the shutter halfway, I get flash indication, some digital numbers, but no change in focus, no beeping, even though it is on and the focus confirmation light does not illuminate. I've searched through the manual to see what I am doing wrong, but can find nothing. Any help you can offer would


Hope I can help with some input to your problem. Let me suggest please that you switch the "mode" dial to "P" for program, check your ISO (I personally shoot ISO 100) and set it for a speed ISO 400 or lower. Most DSLR's use contrast to focus so a mir ... Canon EOS Digital Rebel XTI Digital Camera

I have same problem with my 40D. Push the shutter button and it switches off. Have to remove the bettery for it to switch on again several times but still doesn't working. When I put battery back in the camera the access lamp blinks even though power switch is off. Any ideas??


... Canon EOS 40D Digital Camera

View finder Camera will not switch to view finder mode it stays in LCD viewing even when the camera mode switch is changed, and will not switch to the menu allowing the card to format


I had the same problem, it is the switch inside that is broken which allows you to switch back and forth between viewing pictures and taking them. There isn't really a fix besides getting the switch replaced and I am having a very hard time trying to ... Konica Minolta DiMAGE Z6 Digital Camera

The LCD screen only switches ON in C(Custom) Mode and tansfers to Viewfinder in other Modes.In display Images mode it regains to the LCD screen but as soon as the click button is pressed it again switches over to the Viewfinder I have tried with the Power Saving options and the Custom Settings with no fruuitful result. Please kindly help me in sorting out this problem


Try pushing the disp. or display button. I hope this helps! Please rate my answer. ... Canon PowerShot A570 IS Digital Camera

My Panasonic Lumix DMC FS3 is not powering on fully.... When I switch the camera to the on position the green light blinks on and then off and the lens opens but the screen doesnt seem to power on. When I shut the camera in the OFF position, the green light blinks on then off and the lens retracts back into the OFF position. Can I trouble shoot this or do I have to take to a repair shop? Is this camera even worth getting repaired


See if the memory card cover had been open in that moment .However if the problem persist the camera must go to the repair shop. The syscom and associates circuit has faulty .God bless you ... Digital Cameras

The batteries provide little to no power to my L20 camera. Even fresh lithium batteries will only allow a few pictures to be taken before the camera quits functioning. Regular AA and rechargeable AAs may allow a few pix before they too act dead. Testing these batteries shows full strength, Any ideas on how to fix? Thanks, Bernie Goode Savannah, GA


Hi,\015\012\015\012Change the batteries go with rechargeable, high-capacity NiMH batteries for regular shooting, but in case of an emergency you always carry a spare set of hybrid NiMH or disposable lithium batteries with you, in case th ... Nikon COOLPIX L20 Digital Camera

Canon ixus 750, all of a sudden when i press the button to take a picture the camara lens goes blankand it freezes. the power light stays on and it will still allow me to switch to veiw pictures but as soon as i go to take a picture it wont allow me, please help i love my camara.


... Canon Digital Cameras

Will not power up even with new batteries, cleaned and checked battery contacts, at times it will switch on for a couple of minuted then just power off for no reason.


When did you buy this camera? i have the same exact problem!!! ... Canon PowerShot A620 Digital Camera

I have a canon SD600 sometimes it is showing a problem. When i switched on it is showing a blank image and even i took picture full black image is coming, the camera lens is open, other functionalities are working.The problem is occuring only sometimes after sometime it is working fine.


Ur CCD imager chip is going Bad thousands are facing same problem pls call Canon in ur area ask them they will do it free of charge i am pretty sure even if u are not on service advisory list and out of warranty they will do it just call them and ins ... Canon PowerShot SD600 Digital Camera

My Cannon Power Shot A520 Camera will not power the lens up when I turn it on. I get the message "No Image" on the viewing screen, but nothing else happens. Back Switch is set on camera symbol, but camera acts like it is set on view. I have installed new batteries and battery terminals are clean.


The camera may need a software update which can be done through manufacture for $50 or you can downlaod an update from their website and follow the directionsOr the zoom may be dirty or debris is stuck in the zoom lens and needs to be blow out ... Digital Cameras

Forgets settings My optio s40 worked well until just after the warranty expired. Then it started acting up. It maintains the default settings in auto mode. It allows me to change them, but when I shut it off and power up again, it has returned to the default settings. In Pict mode, it maintains EV +1, AWB as flourescent lighting and image size as one higher than the smallest size. Again, I can change the settings, but when I shut it off and power up again, these are the settings it has. Any idea


I had the same problem. Pentax told me to format the memory inside the camera (take out the memory stick and camera will be set to camera memory). This works! (though i have to do it approx every 200pics, the problem keeps coming back!) ... Pentax Optio S40 Digital Camera

Canon S2IS Either screen is dark when I power up the camera. I can see previous images but I cannot record anything. Sometimes I can reboot the camera and it will work for a shot or two, but currently even that does not work. I have changed batteries with no good results. They power up everything but do not affect the recording of pics. Jeff Canon S1IS have problem with dark screen... I have a brand new Canon PowerShot A560 Digital Camera. I put in brand new batteries. On after shooting n


Your camera has the know issue of Stuck shutter, whichhappens after some time (weeks or months) thata camera is notused.\015\012\015\012Unfortunately the repair of it requires a complete disassembly of the camera, including the lens, fix ... Canon PowerShot A560 Digital Camera

The camera powers on fine, although it has a black screen with no image. What type problem is this and is it fixable or not. When I go to look at the pictures I took while the display screen was blacked out the screen remains with no image. I just turned on my camera the other day and I can still acces my menu, I can see the camera details in the corner and even view old pictures but when I turn it on eveything else is black! I can't take any new pictures because of the black screan. Is this fi


I have the same problem i need help fixing it? ... Nikon Coolpix S3 Digital Camera

I have a SVP T-100 camcorder which all of a sudden stopped working. What is happening is it keeps showing a red light indicating there is no power in the battery and when you connect to the mains it turns green but when you try switching on it goes red again and stays this way!! I have tried a new battery in it and the same thing...the fact that it wont even work from the mains indicates something wrong with the powering getting to the battery or camcorder... Please help. Thanks Maxine xx


... Digital Cameras

Canon S2IS Either screen is dark when I power up the camera. I can see previous images but I cannot record anything. Sometimes I can reboot the camera and it will work for a shot or two, but currently even that does not work. I have changed batteries with no good results. They power up everything but do not affect the recording of pics. Jeff


Hey Everyone,\015\012\015\012First of All, please Don't Panic. The CCD ( sensor ) defect / Black screen of death problem is on the rise. Its becoming a common issue with the S2 IS owners. Send in the Camera with this completed form ( http://consumer. ... Canon PowerShot S2 IS Digital Camera

My samsung sc dc 173u won't power up even when pluged in. batteries are fully charged but, all i get is a blue blinking light near the power switch


Call samsung see if still underwarranty!!!GoodLuck!!!! ... Digital Cameras

1. i get no responce whatever from the camera,even withmains power connected. 2. when i open the tape compartment, nothing happens. 3. when i switch on play nothing happens (black screen) when i switch to take video mode nothing happens (black screen)


Dear sir,\015\0121.check with New battery. if not helps\015\012 \015\012According to u r camera symptoms it seems to be camera is entirely dead.\015\012It is better to take to the service provider of Yo ... Digital Cameras

My HP M527 digital camera works well with my Macintosh iBook G4 using Image Capture. However, it does not work with my iMac desktop even though I am using the identical software. With my iMac, I get all indications that the camera is connected but all I get is a continuing mwessage "..waiting for the device." I have tried disconnecting my all in one printer, but get the same results. I'm using Mac OS X v 10.4.11 and Image Capture versio 3.3.3 on both computers. Any suggestions? Than


Locate and copy the driver into the desktop...or locate it somewhere on the net ...it is not enough to use the software that makes the camera available for commands and all ...but it needs the actual driver for to communicate ...it is searching in l ... HP Photosmart M527 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1507 seconds