Having problems with your Olympus SP-350 Digital Camera ?

Troubles Transferring, now power

\015 I was unable to transfer photos to the Olympus Master program, it would say "device not ready". So I accepted the update/upgrade for the camera, and then for the software, and now i can't even turn the camera on...the green light just flashes.\015

Answers :

You are describing a software and firmware update.
The software update should not have any effect on the camera start-up, but the firmware update could.
Please check to see if there were any instructions sent with the firmware files (like a Read Me file or release notes), which might give you special instructions for properly loading the firmware. Some manufacturers require that you hold down certain buttons on the device when power cycling to load the firmware.
Also ALWAYS be sure to have newly charged batteries of the right type, because a power failure in the middle of a firmware upgrade can ruin a device, requiring service.
Go to their web site to get details about the firmware update, if you are sure you did infact update firmware. Also, their tech support should be able to assist you with additional issues if their recent release is problematice for any reason.
Good luck.
DigiChick


Repair Help & Product Troubleshooting for Olympus SP-350 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Troubles Transferring, now power


You are describing a software and firmware update. The software update should not have any effect on the camera start-up, but the firmware update could.Please check to see if there were any instructions sent with the firmware files (like ... Olympus SP-350 Digital Camera

I have a Canon E80 that I bought several years ago. I connect the power supply from the electrical outlet to the camera and the power light comes on but the camera does not work ( I can not charge the tape the video camera does not work). What I can do it?. The main purpose to run the camera is transfer the videotapes to dvd and I can not do it. I would appreciate your support to transfer the 8mm tapes to dvd.


... Digital Cameras

Began with "low battery". Replaced with new ones. took 3 photos, again message "low battery. Replaced batteries again. Same thing. NOW, , AND BIGGEST PROBLEM CAN'T GET POWER . LENS WON'T RETRACT, POWER BUTTON DOESN'T WORK. I WON'T BE ABLE TO TRANSFER PHOTOS TO COMPUTER. WE'VE TRIED 6 BATTERIES OF THE SAME KIND WE USED BEFORE WHICH. WORKED. It is a Samsung S73. We bought it at Fred Meyer store in Grants Pass, Oregon October 20, 2007 for $129.99. I have successfuly transferred photos to my MACB


Hi there. \015\012You may not like this solution, but it's real anyway. Average low-end digital camera life span is approximately 2 years depending on how much you use it. They vary between manufacturer. Low-end cameras ($100. to $200. range) h ... Digital Cameras

My problem was in transferring from camera to PC without "picture power". Nikon installed the new software by phone. I believe the pictures transferred OK but I can't see or find them to do anything with them. I get screens saying network invalid or confirm satus....I feel I may have ignored the "picturetown" thing. I just need help now in getting to the transferred pictures. Thanks, Tom Ward


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... Nikon Digital Cameras

Transferring pics OK, This EasyShare isnt so EASY! I've never had trouble downloading pics from a camera to a computer, until now. I've installed the software, plugged the USB cord in....it will ask me if i want to transfer ALL pic, select and transfer...etc...however it shows no pic found? HELP??


Have you taken new pictures with the device, or are these already possibly transferred to your system/PC? If they are already on your PC, it will not add them again (to save you space).If you chose transfer all, what do you get as a result? Che ... Kodak EasyShare One Digital Camera

I am attempting to transfer photos from my C713, but I can't power the camera on when it is plugged into the USB. I have changed the batteries and the camera will power on when the USB is disconnected from computer; once the USB is plugged into the computer, the camera will not go on. The Kodak Easy Share software is loaded on the PC. Help!


Easy shares are set up so they won't respond when plugged in to usb. When you turn the camera on and then run the easyshare program and lastly connect the usb cable, then the pictures and video will transfer to the computer. \015\012You can als ... Kodak EasyShare C713 Digital Camera

I have a Kodak Easyshare M1063 that I've had for almost 1.5 years, so it's no longer under warranty. I recently had to replace the battery, and since then, I've been having problems with it. Not all the pictures transfer via the Easyshare software. I've found a workaround for that by inserting the SD card into my laptop and transferring them that way (bypassing the proprietary Kodak software). The last time I did that, however, when I reinserted the SD card and powered on the camera, the shu


Inserting the SD card into a card reader, whether it's a laptop slot or a separate card reader with a USB connection, is actually the best way of downloading pictures. You just have to remember to use the "safely remove hardware" function when you re ... Kodak EASYSHARE M1063 Digital Camera

Coolpix 8800 was slow transferring pictures and then the next day would not power up. triedfreshly charged batteries and ac adapter - absolutely no power up and the only sign it is alive is the battery icon on the small lcd screen on the top. Possibilities - bent pin? any ideas?


I have reviewed your problem and have the fallowing for you to aces.\015\012First, you have mentioned the possibility of bent pins.\015\012If this is the case, you will have to take a good look under a magnified light to make ... Digital Cameras

I installed the solution disk software for my Canon Power Shot A11001S onto my computer. However, when I click on Transfer untrandfered images I keep getting a message thatreads: Canon Utilities Camera Window has encountered a problem and needs to close. My images do not transfer. What do I do?


Hi,This Message is a Common Message and could be there for MANY reasons. The best way to start with is to Uninstall the Software and then Re-Install it. If the Problem Still Persists, then we need to eliminate, is this a Corrupted Softwar ... Canon PowerShot SD1100 IS Digital Camera

No power? without any damage, ie droping bumping ect, my g9, which i love, just stopped powering up. Any thoughts/simlar troubles?


You just need to have the camera serviced for this no power problem. This is common on the G9 but there's a correction that can be done so this problem never happens again. It has to do with two loose screws in the camera that can result in a short a ... Canon PowerShot G9 Digital Camera

When transfering photos, an error indicates that the USB has malfunctioned. Trouble shooting indicates that drivers are not installed. Have been able to transfer photos in the past without problem.


Hi, Please the driver here : www.tomshardware.com > Forum > Windows 7 > Drivers ... Kodak EasyShare V530 Digital Camera

I have a Canon Rebel EOS that I am having trouble power wise with. I can have a fully charged battery in, the power off option off but it still turns off sometimes before I even take a picture. I rarely can take more than one or two shots before it goes blank on the screen. I have cleaned the battery terminals and keep a charged battery in so what else could it be.


Sometimes it happens that the ends of the battery get torn off while we place the battery into and out of the charger for charging. the battery heads get popped off which most of us dont notice. \015\012\015\012i suggest you to get a new alkali ... Canon Rebel XT / EOS 350D Digital Camera

My Panasonic Lumix DMC FS3 is not powering on fully.... When I switch the camera to the on position the green light blinks on and then off and the lens opens but the screen doesnt seem to power on. When I shut the camera in the OFF position, the green light blinks on then off and the lens retracts back into the OFF position. Can I trouble shoot this or do I have to take to a repair shop? Is this camera even worth getting repaired


See if the memory card cover had been open in that moment .However if the problem persist the camera must go to the repair shop. The syscom and associates circuit has faulty .God bless you ... Digital Cameras

I can no longer transfer pictures to my computer like i used to. I have a power shot A75 Canon and my daughter played with it and I think she might have hit something. I went through all the menus and cannot figure how to get them to transfer again


It's very hard to troubleshoot software problems online, and it likely is a software issue. But why put up with the headaches of bad software in the first place? Please see the following post, as it outlines a much easier, faster, and less error pron ... Canon PowerShot A75 Digital Camera

Lens error Hello sir. my camera type is S3IS, When I power on the camera ,It's lens dithering and occured "lens error" ther power off automaticly. Pls give me some information How to solve this trouble.


Hi - i had the same problem, just fixed it\015\012see this link\015\012http://camerarepair.blogspot.com/search?updated-min=2007-01-01T00%3A00%3A00-08%3A00&updated-max=2008-01-01T00%3A00%3A00-08%3A00&max-results=14 \015\012\015\012i just ende ... Canon PowerShot S3 IS Digital Camera

I have installed the software on my computer for my new Canon Power Shot A11001S digital camera. However, when I click on transfer untransfered images the images do not transfer and instead I get a message that reads: Canon Utilities Camera Window has encountered a problem and needs to close. What should I do?


Hi,\015\012\015\012You can download pictures from your camera to your computer by using a memory card reader (You can use your computer's built-in memory card reader, if it has one, or you can purchase an external memory card reader as sh ... Digital Cameras

Can't transfer photos to computer. After proper connection, the blue light does not come on. Have checked instructions on both camera and computer. what else can I do on my Canon Power Shot A610 to transfer to computer CQ60-615DX Notebook?


Assume that each devices either computer or camera were within functionality also requiring a compatible cable connector device to provide media distribution. In such a situation, connecting each device as camera has prior media that require ... Canon PowerShot A610 Digital Camera

My canon power shot SD960 IS has always transfered images to my computer until today. I charged the battery but it still tells me camera diconnected, did not transfer.


HelloThank you for using FixYa for your problemCheck the USB cable, put it into a different port on the computerPlease rate our solutions and if you still have problems please call back for more ideas ... Canon PowerShot SD960 IS Digital Camera

Hello! I have a Kodak Easyshare C713 camera. It turns on, has plenty of battery power and works just fine. But I have a USB cord for it to transfer pictures, and whenever I plug it into my laptop, the camera turns off immediately, and wont turn back on, so it's impossible to transfer my pictures. What is my problem?


It is the way it is, the cam will be blank or black when connected to PC...just turn it on then you will receive a transfer window on the computer. ... Kodak EASYSHARE M1063 Digital Camera

Transferring pics can i transfer pics to my laptop through usb without any battery power on my camera kodak eastshare cx7530


No, the camera needs its own power to power the camera's CPU, USB interface and internal memory. It has to have its own power to communicate properly to your laptop.\015\012\015\012However if your camera uses a memory card or stick, you ... Kodak EasyShare CX7530 Digital Camera

Trouble with Nikon Transfer D60


Try NOT connecting your camera to your computer.\012 \012 The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the compute ... Digital Cameras

Transfer pic trouble


I have the same problem! ... Nikon Coolpix L11 Digital Camera

I am having trouble transferring my pictures from my camara to my


Try uniinstalling the software then install new software se if that works or try to download new drivers from web , ps what windows do you have xp seems to have probs with camera software or check to see if they is any conflict with camera instalatio ... Kodak EASYSHARE C503 Zoom Digital Camera

How to transfer pictures from the Canon Power Shot A630 to the co


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Trouble transferring photos to my laptop.


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... FUJIFILM FinePix S4000 / S4050 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1070 seconds