Having problems with your Olympus Stylus 700 / 700 Digital Camera ?

The zoom lense keeps going retracts when we turn the camera on, Why?


Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Olympus Stylus 700 / 700 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The zoom lense keeps going retracts when we turn the camera on, Why?


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Olympus Stylus 700 / 700 Digital Camera

I have a canon powershot A470 and it fell in water. after i removed the card and batteries of which still worked and neither were wet, i let the camera dry for a couple of days. it has turned on since and the screen would come on and show me the pics on the card but it kept turning itself off and the zoom lense would go in and out on it's own. now, i can't get the camera to turn on and the zoom lense it stuck. any ideas??? or should i call it a wash. i really love this camera!!! Theresa


I submerged my powershot for a couple of seconds. it did get completely wet. it was acting very strangely: the lcd wasn't working, the little orange light on the front kept flashing, and it took a few tries for the lens to extend.then ... Canon PowerShot A470 Digital Camera

When turned on lense would only retract partially and then turn off. took it apart. I have it to where the camera will now go on, am able to take a photo (all normal) except I cannot get the lense to "attach" to the camera properly. Cylindrical lense. three screws protruding from it. not sure if the lense mounts on a black ring on the front or under the ring. The "in out" mechanism works but it will not grab the lense (cover?) to move out then retract. Seems to need to attach under the ring but


Good day,This is a common problem and sometimes can be fixed.Please see details on my tip on how to fix this error here:http://www.fixya.com ... HP Photosmart M415 Digital Camera

Zoom error Today after using my camera for awhile the back screen displayed "zoom error" and a little sound whirled. Then the camera shut off by itself. I turned it on and off a couple of times, but without success. The lens is extended and will not withdraw back into the camera. I have taken out the batteries and re-inserted them. Finally, I gently pushed the lenses back to the body of the camera (as they seemed to be trying to go back to the camera), I am still getting the zoom error reading a


You may be true that sand must be creating this problem, as this happens very often. the sand enters into the lense assembly, creating friction in the movement. if this has happened total dismantelling and cleaning of the lense assembly will solve t ... Olympus Camedia C-350 Digital Camera

When i turn my fujifilm finepix s8100fd camera on the lense will pop out as normal initially then the screen will say lense error, and the camera will make a funny noise and the lense will go back in, it will pop out again when i use the zoom button, how do i fix my camera =S


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Fuji FinePix S8100fd Digital Camera

My camera lens won't retract and the camera won't turn on. so the camera is off but the lense are out and it wont go back in or turn on.


Get new batteries alkaline .. if it still does nothing with a pin pull out slightly the two gold connectors on the battery door slightly ok ... Kodak Easyshare C813 Digital Camera

Blurry lenses Same problem exactly. I'm not sure what happened (maybe sand in the camera?) The camera now turns off to a black screen, If I push the botton to see ast pictures, the screen works again and lets me see through them. But If I go back to "take picture mode", the image they give me is all blurry and if I try to use the zoom, the camera turns off.


This sounds like you have gotten some kind of contamination inside the camera, it is blurry because the lens can't move to focus the image in a smooth manner, it is sticking. U can try taking this apart but based on my experience this is best left ... Olympus FE-280 Digital Camera

Zoom lens will not retract- camera turns on and off but nothing changes and it wont take pictures. When I turn it on the lens clicks but does not move. The camera keeps telling me to turn it on and off again but nothing different happens when I do. The battery is fully charged and it was working fine. Does it have a reset button? If so where?


Hi,This is a common Error. There is NO Reset Button. If under Warranty, send the Unit for Repair. Unless use the below techniques, if that could help.There is no point in Getting it Repaired by a tech it would cost you more than $100.If y ... Sony Cyber-shot DSC-W80 Digital Camera

At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retracts and the camera terns off. i tried to connect with computer and scan for virous, but, when i connect the USB and turn on the camera, the lense retract and tourn off the camera indicating system error 0030.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... BenQ DC E610 Digital Camera

At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retracts and the camera terns off. i tried to connect with computer and scan for virous, but, when i connect the USB and turn on the camera, the lense retract and tourn off the camera indicating system error 0030.


Hi and welcome to FixYa,Initially, a few ideas you may want to consider:\015\012\015\012ensure that both the built-in 13Mb and the SD memory card are formatted through the camera's features/options ... Digital Cameras

Zoom error I turned my F470 camera on and received a "zoom error" bar across the screen. The lense does not move outwards after I turn the power on, nor does the plastic sliding screen close when I turn the camera off. The lense is exposed whether or not the camera is on or off. The lense does not make any sounds when I turn the camera on, but I hear (what I think) are the gears when I turn the camera off. When the camera is on, the screen is working, but the image is blurry. I tried other poste


Hey MBB722,\015\012 What is most likely going on is there is something stuck in the lens obstructing its movement (i.e. sand). I don't know what you have tried and what you have not tried you can try placing the came ... Fuji FinePix F470 Digital Camera

Panasonic DMC-TZ4 When I switch on I get "Turn off camera and turn on again" message but it does not good. When I swtich off I get "workng hard" noises as if there is an effort to retract the lense but it will not retract unless I turn the camera on again. At that point the lense retracts and comes out again at once; more "hard work" noises and a new "turn your camera off" message. The only way to get the lense into the retrated position is to catych it at the right instant and remove the batter


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic DMC-TZ4 Digital Camera

Sony-cyber-shot dsc-w50 I blieve that the battery if fully charged however when I turn the camera on all i see is a blank screen saying "access" with the lense zooming in and out then a message comes up on the sceen saying "turn camera on and off" I do this and the same thing keeps happening, could you please help? Sara


Lens unit is faulty, may have had sand or damage at some time, focus assembly inside the lens is not focussing ... Sony Cyber-Shot DSC-S40 Digital Camera

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

My lense is stuck open despite turning my camera off. On turning my camera on I am told ''turn camera on off then on'' but the lense does not retract. I am able to view all photos on the memory card as well as turn the camera on and off, however at each point when the lense should retract it stays fixed out. Can this be fixed?


This is not a joke........Use a can of compressed air and blow around the lens while it is extended. Take a relatively firm approach with this problem slap the camera into your palm two or three times. Not lens down in this case, bu ... Sony Cyber-shot DSC-W120 Digital Camera

I have an olympus digital camera fe-170. when i turn on my camera, the lense come out and the LCD screen is black, when i try to turn it off, it doesnt turn off, but after like 10 seconds it turns off by itself. but when it turns off the lense dont go back in?! then when i try to turn it on, its the same thing. when i plug it into the computer, the lense go back in, but when i unplug it from the computer and try to turn it back on again...SAME PROBLEM. i did drop it before, but can i do anything


The lens is bad, needs to be replaced. Maybe purchase camera on ebay with broken LCD but good lens. Replacement can be time extensive. Will need #00 or #000 phillips screwdriver and solder iron. Remove 6 exterior screws+2 inside battery door. Take of ... Olympus FE-170 Digital Camera

My camm! I have an olympus digital camera fe-170. when i turn on my camera, the lense come out and the LCD screen is black, when i try to turn it off, it doesnt turn off, but after like 10 seconds it turns off by itself. but when it turns off the lense dont go back in?! then when i try to turn it on, its the same thing. when i plug it into the computer, the lense go back in, but when i unplug it from the computer and try to turn it back on again...SAME PROBLEM. i did drop it before, but can i do


I think thy will say you, replace lens unit. but lens is very expensive, so we can buy new one camera. I have the same problem, i found focusing lens wheel teeth slipping, no parts available, so i covered a gum coat on the teeth. ... Olympus FE-170 Digital Camera

Lens error, restart camera telephoto lens is stuck in zoom position and won't retract, so when i turn on camera, screens says "lens error, restart camera", but it won't restart...just keep coming up with same error message


Hello mnickoliThis is a fairly common error especially with the A560.This either means that something is jamming the lens , or that the\015\012lens sensor is faulty. This is a very , if not the most common problem\015\012with modern digit ... Canon PowerShot A560 Digital Camera

Zoom Error Okay, I've looked all over this thing on how to fix the zoom error and nothing seems to work. I have a finepix a205 and the zoom is extended and won't retract. No matter what I do I can't get it to go back in. I've tried turning it on and tapping gently and that doesn't help. I've also tried the can of compressed air and that didn't help at all either. Any other ideas? The thing is this isn't my camera and I have no idea how but one day it just wouldn't work and it hadn't been


Use new baterai and, if your motor lens is good condition, your lens will be retract inside that hole... ... Fuji FinePix A205 Digital Camera

Hi. I have a finepix jx250 digital camera. The camera lense keeps going in and out and there is a messege that says to turn the camera off and on again.. I did that but it still did the same thing. I tried pressing the shutter and power button at the same time. I tried pressing the power button and the menu/OK button at the same time. I tried taking the battery out and putting it back in. I tried taking the battery and the memory card out putting the battery back in and leaving the memory card o


Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101 ... FUJIFILM FinePix JX250 Digital Camera

The camera keeps coming up with error code E18 and the zoom lens is not going in and out when you turn it on and off It will not go in far enough for the lens cover to shut


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Canon PowerShot SD550 / IXUS 750 Digital Camera

My cameras lense wont fully extend, it just makes a funny noise. It wont fully retract and go back in the main part like its supposed to either it tries for a minute and gives up, and just turns off with the lense out.


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Olympus FE-5020 Digital Camera

My canon ixus 75 is not turning on properly the zoom lense is stuck out and wont retract. When i turn it on it says "lens error reset camera"


OK, assuming the batteries are ok, the problem is within the mechanism for the lens being too 'binding' while it operates.\015\012\015\012Sometimes, people put their finger on the barrel of the lens when it retracts or extends.\015\ ... Canon PowerShot SD500 / IXUS 700 Digital Camera

My camera all of a sudden will turn on randomly. when i hit the off button, it won't shut off. i have to end up taking out the batteries to shut it off, but the lens won't retract. when i put the batteries back in, it won't turn on when i push the button, it just keeps going on automatically. what's wrong?


As I understand, you had a software lag, you have not waited the end have taken out batteries. Now you should reboot the camera, or to address in the service centre.ht ... Canon PowerShot A530 Digital Camera

When i turn off my camera sony cyber shot DSC-S90 the zoom wont retract and a word appear in the screen turn off and on again..any idea what's going on with it?


Sounds like you have some grit or gum on the lens barrel. This will cause the lens to stick in the partly closed position. Clean the lens barrel and try again. A rag moistened with methylated spirits may be needed. The rag must not be wet as we must ... Sony Cyber-Shot DSC-S90 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4191 seconds