Having problems with your Olympus Stylus 710 Digital Camera ?

When I switch on I get following message

\015 D:\015\012\015\012 5F08\015\012 340A\015\012 5F08\015\012 5E02\015

Answers :

Repair Help & Product Troubleshooting for Olympus Stylus 710 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Kodak C913 sometimes follows switch on with the statement memory card needs formatting. I have tried to do this several times but to no avail. I am then faced with a message which says that I should use a new card. I am now on my third card and I still get the formatting message. This does not happen every time I switch on but about 8 times out of ten. the other 2 times the camera works well whilst it is still switched on. When I switch off the problem re occurs. There is nothing wrong with a


First of all, stop putting your cards in another camera....this can corrupt the card. With no card in the camera, go into the menu and find "reset"...follow the on-screen instructions. Insert your card, turn on the camera and go into the camera menu ... Kodak EasyShare C913 Digital Camera

We have a Sony DSC-P150 7.2 Megapixel camera. When it switches on we get an error message as follows: E:61:00. If we get the option to take a picture then there appears to be no auto focus on the lens alsowhen switching off the camera the lens does not close down into the camera.


... Sony Cyber-Shot DSC-P150 Digital Camera

Hi, I have Nikon P90. From last week i am facing following problem. Whenever i switch on my camera for taking pic, everything starts but i get message on the screen " Lens Error (If lens cap is attached,turn the camera off, remove the lens cap,and the turn the camera on) The above error message is their despite i opend the shutter of the lens. Kindly help me to know the above problem.


Hi,Here is a tip that I wrote about How toget a Digital Camera Lens to work againSteps toRepair a Digital Camera Lens\012heatman101 ... Nikon D90 Digital Camera with 18-105mm lens

When I switch on I get following message


... Olympus Stylus 710 Digital Camera

Card error When I switch on the power I get a message to either switch off power or format the card. I press OK to format the card and then get a message of card error


If you get a message as "Memory Card Error" on your camera AND you still need some of the photos , the first step is to format the card through the camera menu (Note: if you have an sD card, once you re-format your card any photos cannot be recovere ... Olympus SP-700 Digital Camera

Panasonic DMC-TZ4 When I switch on I get "Turn off camera and turn on again" message but it does not good. When I swtich off I get "workng hard" noises as if there is an effort to retract the lense but it will not retract unless I turn the camera on again. At that point the lense retracts and comes out again at once; more "hard work" noises and a new "turn your camera off" message. The only way to get the lense into the retrated position is to catych it at the right instant and remove the batter


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic DMC-TZ4 Digital Camera

I am trying to use my Olympus D-460 after not using it for ~ 4 years. I downloaded the pictures from the 16 MB card using my laptop with a card reader. I then emptied the card. When I pull back the lens cover, the lens comes out but then i get an error message that the card is full. I followed the directions for formatting the card but still get a message that the card is full even though it also gives me a no picture message. i copied some of the original pictures back on to the card and can v


Glad to hear you're back in business! ... Olympus D-460 Zoom Digital Camera

When I turn on my Nikon D40 with the 18-55 mm lens set to autofocus I get an error message "Error. Turn Camera off and then on again." If I turn the lens switch to manual, I do not get the error. If I attache my 70-300 mm lens, I get the error regardless of the lens focus switch psition. I have just upgraded the firmware with no improvement.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

I'm trying to upload pics from my Z8612 IS digital Kodak camera and am continually getting the following message: "Camera is in use Please try again later" Not sure what I'm doing wrong. Camera is connected to my computer and icon shows up but when I go to get pics is when the error message shows p


Use a card reader to download your pictures to a folder you create on your desktop. ... Kodak Easyshare Z8612 IS Digital Camera

I have attempted to install the Kodak easyShare disk and keep getting the following message--- This application has failed to start because the application configeration is incorrec.. reinstalling the application may fix the problem--- I have reinstalled the disc 5 times and keep getting the same message


Try going to your cameras manufacture web site and you might be able to download a updated version of the Kodak easyShare program for free. This will probably be more of a updated version. ... Kodak Digital Cameras

Hello, I got panasonic camera DMC-LZ5 , recently I am getting message just after starting -"Switch off and switch on camera".Then same message repeats.But prevously shoot


This is usually a lens problem...try these.\012\012Fixing a Lens Error on a Digital Camera\012\012Thi ... Panasonic Lumix DMC-LZ5 Digital Camera

Have a Panasonic DMC-FS15 and get message saying "turn off and back on" followed by "system error (focus)" Have tried taking battery out for length of time and making sure charged, blew on connections for both battery & memory card - still get the same message, plus the lens goes in and out but doesn't go in when camera turned off.


I have this exact problem. I note, your issue is happening at the same time. Weird.\015\012\015\012Tried a variety of other "fixes" but none seemed to solve this issue. Thoughts?\015\012 ... Panasonic Lumix DMC-FS15 Digital Camera

I have a Minolta Maxxum 5D which I really like. I take a lot of pictures outside with my job. I have a telephoto lens and a regular lense as well. I switch lenses a good bit depending on the shot. Everything was working well until I now get a message that reads "no lens attached" when there is a lense on the camera. The weird thing is that I only get this message on my regular lense and my telephoto lens works fine. I even carried my camera by a local Minolta/Konic dealer and they were baff


It can occur if the contacts on the lens where they meet the contacts on the camera body need cleaning. Try a cotton swab lightly dampened with rubbing alcohol. ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

Good Day. I dropped my Nikon Coolpix L16 camera onto a table. Since then when i switch the device on the lens goes out about a quarter and the goes back in and i get a lens error message. I noticed that when the lens goes out it bends to the right(looking from the top) and gets stuck by something. When i pull the lens a little to the left while switching it on everything works fine. A very small metal part came out of the camera. Any ideas? is it repairable?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Digital Cameras

I have a cybershot DSC W55. When the power button is switched on the lens extends and the "access" message shown on screen. Also amber light is flashing above screen. After a few seconds I get a message to power on and off again. I've tried switching on and off a few times, removing battery pack and memory card, but nothing seems to be solving the problem.


I have a cybershot DSC W55. When the power button is switched on the \015\012lens extends and the "access" message shown on screen. Also amber light \015\012is flashing above screen. After a few seconds I get a message to power \015\012on and off aga ... Sony Cyber-shot DSC-W55 Digital Camera

I have just attempted to install Kodak EasyShare version 3.3 on my computer and when attempting to use it I get the following message"this application has failed to start because the application configeration is incorrect... reinstalling the application may fix this problem.. I have reinstalled 4 times, atempted to repair twice and I still get the same message


Try visiting your camera's manufactures web site and they should offer this program for free via download. This will get you the newest and latest software version as well. ... Kodak Digital Cameras

I get error 99 with my EOS 1000D as soon as I try to shoot the first picture after switching on following either an auto switch off or switching off using the switch. re-installing the battery cure it until the next switch off.


Shutter unit is faulty you need to replace it\015\012its have come err99 problem which is can be sort out with service firmware 1.0.6 update and then put latest firmware 1.0.6 ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Access problem When I turn the camera on, all I get is the message "access" followed by another message to "turn off and on again". When I turn off and on as it said, all it does is recycling the same messages again and again and again..


... Sony Cyber-shot DSC-W55 Digital Camera

Lens error CoolPix L11. I switch on the camera The lens comes out. A picture is shown for about 1 second. Then the message Lens Error is displayed. The lens is retracted. After 15 seconds or so the camera switches itself off. The camera was bought in USA as a gift for a friend in Sri Lanka. Not so easy to get a local repair - if this is at all possible anyway. What is your advice? Thanks James


Try the procedures in this tip. ... Nikon Coolpix 5700 Digital Camera

Error message When I turn camera on I get following error message; Error 00-00-00 30-00-28 No idea what this means . I can still use playback function to look at photos but can't bring up screen to take photos. I thought it was because memory card was full but have since deleted heaps of photos and it still doesn't work.


... Ricoh Caplio RZ1 Digital Camera

DSCH9 continue to get the following message when trying to get flash to work - flash settings cannot be changed


Guys - I just recevied a new H9 today. Was using it and decided to turn\015\012the flash off. Later on I wanted to turn it back on and I got the\015\012famous "flash settings cannot be changed" error message. I found the\015\012problem. I had turned ... Sony Cyber-shot DSC-H9 Digital Camera

Hey Guys, whenever I connect my Konica Minolta DiMAGE X60 to my PC (WinXP, Service Pack 3), I receive the following error message: "Power Surge On Hub Port". I already checked the internet to solve the problem, so I know how to get rid of the message box. But it doesn't solve the problem... I also tried to reinstall the drivers for the USB ports. Need help!


When i connect my KonicaMinolta Dimage 60 to my computer. camera does not go beyond Initialization. Has anyone had this problem? ... Konica Minolta DiMAGE X60 Digital Camera

Memory card i used wallmart site to download pics, with the usb, when i was done turned the camera back on, the message i get says memory card is protected, reset switch on memory card, i have done this several times and it is still there.i can not remove it or take pics, but i can get into the review option. help.


There is a catch inside the camera that is possibly out of whack. You need to make sure the camera itself is not moving the security slider on the memory card. This would be due to puting the card in wrong or just from wear on the camera. ... Kodak EasyShare C340 Digital Camera

ACCESS message Getting a message on the digital camera screen that just says ACCESS then aske me to switch off and on again but won't work - any ideas? Its a DSC-W50.


One guy with the same problem fixed it by running over it with his SVU and posting the video on Youtube. It's smashed but "access" has disappeared from the screen. ... Sony Cyber-shot DSC-W50 Digital Camera

I have a picture frame model #9FF2CME. I have followed the instructions for how to install into an iMac, with no luck. iMac is new with leopard and 10.5. I get a message that says to not... disconnect while you are transferring pictures. Problem is, I can not move beyond this message. Help ..... and thank you. John Beeler


Hi after you have connected it to the computer are you then selecting mass storage device? and are you also transfering or copying them into the root directory of photo frame you also need to make sure they are jpeg images as it wont accept any other ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2056 seconds