Having problems with your Olympus Stylus 850SW Digital Camera ?

My LCD display just randomly stopped working.

\015 My Olympus 1030 sw LCD display just randomly stopped working. It sometimes works when i power on the camera for a few seconds but then turns off. Everything else on the camera works when powered on except the LCD. I couldn't find anything about it in the manual, how could i fix this?\015

Answers :

Replace the battery and check out firat with brand new battery.many a times it battery problem.if still the same problem its due to lcd ic faulty on the mini circuit board.that has to replaced by a service center.
Repair Help & Product Troubleshooting for Olympus Stylus 850SW Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My LCD display just randomly stopped working.


Replace the battery and check out firat with brand new battery.many a times it battery problem.if still the same problem its due to lcd ic faulty on the mini circuit board.that has to replaced by a service center. ... Olympus Stylus 850SW Digital Camera

I have canon power shot A 720 IS. Its been fine for 2 years. suddenly it stopped displaying in the LCD screen. But i can take pictures by looking through the view finder. Also, the LCD display works when in the video mode and photo stitch mode. please let me know the solution. Thanks.


Maybe the display was turned OFF. Check it and turn it ON. If still in problems, look for a specialized service to check you camera. ... Canon Digital Cameras

My camera nikon d3000 suddenly stopped working...the lcd has no display,and even the viewfinder...it happenned today..it was so sudden..i was clicking pictures and suddenly it stopped working


Try resetting the camera by removing the battery for 15 mins, replace the fully charged battery, go to the Menu setting and set the Date and Time.If it still does not work then - this camera needs to be sent away for\012repairs. Just like a ... Nikon D300 Digital Camera

LCD Problems Hi, My Rebel XT's Top LCD screen and Display in the view finder isn't working properly. It displays random "symbols" but is identical in both. An example of this is the range finder will roll down but 3 notches will stay lit up ( 1 on one side 2 on the other. Do i need to send it to back to Canon?


Probably a canon repair situation ... Canon Rebel XT / EOS 350D Digital Camera

Nikon d90 stops working after drop on floor. looks like shutter stuck, show Err. plus lcd only display part of the image, button Live View not function to look through LCD. is it only the shutter problem or more?


You have see first visible damage. However camera should be dropped. D90 is not magnesium case. ... Nikon D90 Digital Camera with 18-105mm lens

My samsung s630' lcd screen randomly stopped working!


OMG same thing happened to mine . ive had my camera for nearly a year and the green light comes on and thats it , also sometimes the zoomy thing moves out but the screen doesnt work :/\015\012i suggest you buy a new camera or get it fixed with ... Samsung S630 Digital Camera

Hi, My pentax optio WP don't work anymore. When i switch it on, it stops after 5 seconds. If i start it in read mode (blue button pressed whil i switch it on), it works, but the menu button dont't work and displays a yellow lock on the top of the screen. If i switch it on with the menu btton pressed, it displays ver 1.00 before to stop after 5 seconds If i switch it on with the menu and the blue btton pressed, it displays ver 36, then xxx test xxx and v 866-76 , 1.0001 before to stop after 5 sec


Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.If this is not the issue, please describe specifically which buttons are not workin. ... Pentax Digital Cameras

My fairly new Cannon SX230's LCD display stopped working properly.


Hi! Try this. Press and hold the disp button down for 2 to 3 seconds. The display should brighten up for you. ... Canon Sx230 IS Digital Camera

The lens doesn't open when we turn on the camera. The camera makes the sound of turning on and the LCD monitor lights up showing standard Optio display, but the lens don't open neither the zoom. After turning on, the Off button stops working and the only way to turn of the camera is by removing the battery.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Pentax Optio 550 Digital Camera

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!


You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera

I have (2) DGS-200 Moultrie cameras that the LCD display has gone out. Replaced (1) with the LCD display from a Moultrie 100. Worked great but I still have two cameras that can't be programed without seeing on LCD. Is there anywhere to purchase these LCD screens or purchase non-working Moultrie cameras?


WWW.MOULTRIEFEEDERS.COM WILL SEND REPLACEMENTS AND INSTRUCTIONS FOR FREE.... ... Moultrie MFH-DGS-100V2 Digital Camera

Lcd display not working.nikon p500 went into watrefalls.. after putting it into ricebag for few days ( service center guy told it can t be done) after few days i could switch on camera , and could take pictures from view finder, lcd display seem to be not working.. any thing advisable to make work? can i go for new lcd, if so how much it would cost..


Yes you can replace it You must to do the decission replace LCD vs New camera. Call or go to NIKKON and ask them where is difference in cost Sometimes replace is cheaper that to buy. Other is better to buy that replace specially in USA.God bless ... Digital Cameras

My sony dsc-w1 got very wet, caught in a rainstorm and did not have the case. I have left it dry out for 4 days and it turns on, lcd works, can read memory stick and display old pictures on the lcd. But when I try to take a picture the lcd displays a black a screen and the picture that it takes is just a black box, flash illlumintor everything else seems to work, except the ability to take a picture, lens moves in and out, but picture is always black, any idea, is the ccd shot


Maybe the shutter got wet and sticky. You can try look into the lens then press shutter button to take picture. If you don’t see the movement inside the hole, the shutter doesn’t open, it will take black picture. ... Sony Cyber-Shot DSC-W1 Digital Camera

Blank LCD works but wont display


I have a Canon powershot A85 camera, and it works fine, but I get no picture in the LCD screen. It does take pictures and I can look at the pictures after I have taken them. I don't know if you live in Australia, if you do ring Canon on 131383. A lot ... Canon PowerShot A85 Digital Camera

Camera repair The LCD display is white with red lines going through it. Even the viewfinder does the same thing -- white. When I hit the view button, the same thing sometimes. It seems to do worse outside. You can faintly see the pictures I took in the LCD display. Now the LCD display is totally black. What's wrong. The menu display still works. What can I do?


Time for a new Camera. It is about 150.00 to replace the LCD. it is cheaper to replace it unless you can just use the viewfinder alone!! ... Kodak EasyShare Z612 Digital Camera

PV-DC152D CAMCORDER, LCD Display only works if it is pulled out, turned 180 degrees and pushed back into place so the display is facing you. If you move the LCD display over 3/4" away from camcorder it will go black again. Personally, I think this is an issue with some sensors that gauge when to turn on the LCD display "ON" and Viewfinder "OFF" and vice-versa. Any help on this would be appreciated since there is nothing else wrong with the camcorder.


The most likely problem is a cracked ribbon cable that goes between the camera and the display. The cable needs to be replaced. Typical cost for this is around $40 or so plus labor. I would not suggest that you attempt this repair yourself as open ... Panasonic Digital Cameras

Sd110 lcd My LCD did not work, canon repaired it....GREAT! but 2 weeks later it died. It was blank so I send it back and canon says they want money to fix. Damn.. It still takes photos with no problem. I cannot access any functions because the LCD won't work. I've tried the Display button and got the black and white screen of death. I have to take the card out to transfer photos. Canon says"UNIT HAS IMPACT/PRESSURE TO LCD". Do I need a new LCD or what. thanks, steve stokes


I have had my LCD screen go out in my small point and shoot as well, though i did not even bother with my company for the warranty was far expired. You could do a couple things. You could buy an LCD screen off ebay, or anywhere you can find it ... Canon PowerShot SD110 / IXUS IIs Digital Camera

My cibershot DSC-F717 does not have anything in the viewfinder and the LCD displays the settings and options.The screen is black with yellow words and numbers Also my zoom will not work. The LDC does not have an image on the viewfinder nor the LCD. I do have the LCD setting options displayed. The zoom will not show where the setting is on the LCD and I have checked all the settings (the focus on the zoom mode, conversion in the set up turned to off).


HelloThank you for using FixYa for your problemYour camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras ... Sony Cyber-Shot DSC-F717 Digital Camera

Nikon D40 hello.. I have a Nikon D40...and the display picture is not working,not even when i turn the camera on,not to see the pictures i was taken...is just not working,please help me.... My LCD display suddently stoped working. It happened before once, and automatically its started working. Please help me !


Try pressing the "info" button on the top of the camera next to the shutter button. This turns the LCD off and on to save battery life. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

The top (monochrome) LCD on our Nikon D80 recently broke. I think that it is actually called the "Control Panel," and displays settings, battery life, number of pictures remaining, etc. Please note that this is not the 2.5" color LCD on the rear of the camera. I know that it is merely the LCD because the backlight works, as does portions of the LCD display itself. Does anyone know of a guide or video to perform this repair? Also, does anyone know the part number? I plan to call Nikon tomor


Hi Jason. First of all, depending on the age of your camera and the warranty you purchased, this camera may be under warranty which would result in Nikon fixing it for free. \015\012\015\012Here is a free downloadable manual for your camera ... Nikon D80 Digital Camera with 18-135mm Lens

Format Error I have a SDSC-W55 with a 2GB SanDisk memory card. On a recent vacation, the camera just stopped taking pictures and displayed FORMAT ERROR on the screen. The card was half full and the battery had sufficient charge. I was initially able to display the pictures I took so I stopped using the camera. Now I cannot display any pictures at all. The camera displays the same error. My PC will not recognize the memory card. If I pull the card, the camera and PC works fine with the inter


This kind of problem is called "Format Error" and often happens to memory card or USB flash. \015\012\015\012There are many reasons may lead to this. Like pull out the card without power off or fall the memory card onto the ground, ... Sony Cyber-shot DSC-W50 Digital Camera

I have got a Panasonic NV EX3EN digital camera.I am experiencing the following problem, can any one solve it out please. menu button not working-wont record or play back....there is a red light flashing o the lCD and a command is comuing up on the LCD screen U 10.when i disconnect the battery and reconnect it , the camera works for few seconds and again stops working.


... Panasonic Digital Cameras

I have a Canon Powershot 5S IS. The image on the LCD screen is not rotating when I rotate the screen, and when I snap the screen into place with the LCD side out it goes from displaying on the LCD to displaying on the viewfinder. It was working properly before, but I can't figure out how to get it back to those settings.


On camera menu, turn on Reverse Disp. ... Digital Cameras

It seems to me that Nikon Point & Shoot cameras, or at least the last 2 that I have bought, have a usable life span of approx 4 or so years before the LCD's decide not to work in turn, makes the camera non usable. I have a 5700, 3.5 years old before it stopped working & a S4, which the LCD also quit working and it is 4 years old, I think my next point & shoot will be a Canon to go along with it's big brother that I bought this year, 50D Does anyone have a solution to this Nikon problem? Stan Wil


No solution here. If you want a quality Nikon, you need to spend thousands for their professional DSLRs. Take care of your Canon and you should be very happy with it. ... Nikon Coolpix S4 Digital Camera

Canon EOS Digital Rebel XT: The upper lcd screen info flickers,some of the icons on the screen work normaly, but other icons are lighter and flicker. Im speaking about the portion that displays battery life and #of pics taken. The lower display screen (color)works fine. Otherwise the camera works fine.


It seems you have a false contact in the upper LCD screen, its flat ribbon cable or the connector at the main board.\015\012\015\012It is necessary to open it and check it.\015\012\015\012It is fairly easy to do it, but if the ... Canon Rebel XT / EOS 350D Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2073 seconds