Having problems with your Panasonic Digital Cameras ?

I have an hp pavilion bought last year and when I try to install the cd of my rr-us395 panasonic recorder(bought en 2007), I get everytime the message of error asking me to re-do the procedure. What can I do?


Answers :

There could be a possibility that the CD is not working correctly. Kindly click this link and get the latest update:

http://www2.panasonic.com/consumer-electronics/support/Audio/Portable-Audio/Recorders/Drivers-Downloads/model.RR-US395S.D#ts

Have a great day!
Repair Help & Product Troubleshooting for Panasonic Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have an hp pavilion bought last year and when I try to install the cd of my rr-us395 panasonic recorder(bought en 2007), I get everytime the message of error asking me to re-do the procedure. What can I do?


There could be a possibility that the CD is not working correctly. Kindly click this link and get the latest update: http://www2.panasonic.com/consumer-electronics/support/Audio/Portable-Audio/Recorders/Drivers-Downloads/model.RR-US395S.D ... Panasonic Digital Cameras

Hello. I bought a T328 12MP Digital camera in mid July. I used it twice and it began giving me a lens error message and shut itself down everytime I tried to use it. Using the procedure provided with my camera documents, I mailed the camera to the address provided. I have corresponded back and forth now for two months and each week that I call them they tell me it'll come by the end of the week. I am tired of calling and hearing them say that It'll arrive in a week. Can you help me get what I pa


... Vivitar ViviCam T328 Digital Camera

I have a Panasonic AJD 250P DVCPRO VTR (Recorder/Player), that was used less than 100 hours from 2000-2002. It sat for the next 8 years in a computer room unused. I ordered a new mini DVCPRO tape and tried it out again. Even after I let it warm up for a few minutes, it either gives me error message 31 (loading operation is not completed within 4 seconds), and if I don't get that message, if I rewind or FF the tape, I get error message 61 (the supply reel motor is locked). Do you think this is a


After 8 years of non-use, any lubrication will have dried. Any rubber belts will have lost most of their elasticity. ... Digital Cameras

I have a small Panasonic Lumix DMC-TZ5 camera. After fully charging the battery I am all of then sudden getting this error message :"please turn camera off and then on again." When the camer is OFF the lens is extended and open. When I move the camera to ON the lens moves in to the closed position closes, then reopens, extends, tries to focus, is unable to and the error message appears "Please turn camera off and then on again" This cycle just repeats. The lens is able to extend it is not st


Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101 ... Panasonic Lumix DMC-FZ7 Digital Camera

I have installed the software for cannon power shot A80. when I try to down load I get a "No camera was foud" error message! I have tried rebooting but still get the same error everytime.


Do what the pros do...use a card reader. ... Digital Cameras

Have a Panasonic DMC-FS15 and get message saying "turn off and back on" followed by "system error (focus)" Have tried taking battery out for length of time and making sure charged, blew on connections for both battery & memory card - still get the same message, plus the lens goes in and out but doesn't go in when camera turned off.


I have this exact problem. I note, your issue is happening at the same time. Weird.\015\012\015\012Tried a variety of other "fixes" but none seemed to solve this issue. Thoughts?\015\012 ... Panasonic Lumix DMC-FS15 Digital Camera

I just bought an SD card and put it in....I get an "Error" message. I asked a rep at Wal-Mart what she thought it could be. She said that the card was too big. I'm not sure what she meant by that.I bought the same type of card that was in it. It was also giving me the "Error" message with the prior card.


Your camera is able to take SD cards up to 2gb and SDHC cards up to 4GB. The error message may just be that the camera needs you to format the card in the camera. ... Samsung Digimax S730 Digital Camera

When I turn my camera on, I get a message that says, "Lens error, restart camera," but everytime I restart it, I get the same message.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot SD1100 IS Digital Camera

Hi Team hve a problem with Olympus Camedia C-450 Zoom Digital Camera - put in new memory card (original) and since cant get camera to work - I think the said camera is almost new - but I get error message -CARD ERROR - when asked to format? - please help? Paul


You need to format a card in the camera to erase and optimize it for the camera. Go into the menu and scroll to "format" and follow the on-screen instructions. ... Olympus Camedia C-450 Zoom Digital Camera

When I turn the camera on I get a Lens Error 221,0,0,0 message and the camera shuts itself off.


Dear sir,this happens when the clearance for the lense mechanism to open and close is being insufficient due to -small bits of sand or lint that may become get trapped in the mechanism which is co ... Kodak EasyShare C613 Digital Camera

E:91:01 hello friend I saw your reply for the e:91:01 flash error. I'd like to ask you if those steps are realy working, i dont have the camera with me right now to test it. but i will do it when i get home later in day. I have a DSC-W50 that now blinks that error. Before this error i had 2 others but i fix them. firstly: while i was turning ON the camera ...lens where comming in and out for 3 times, and message was displayed on LCD that i cant remember right now. Solution: .. i disassembled in


I've had my dsc w50 for about 2.5yrs and its just started the same milarky! Go to menu, set up 1 and re-initialise, it cleared for me then came back again. Went through the same process just now and error has gone for time being, although I think t ... Sony Cyber-shot DSC-W50 Digital Camera

My lens keeps saying lens error 113,0,0,0 and the lens would not get open each time I turn it on.The message is being persistent at every time I press on


Lens errors are NOT the sole ownership of Canon. These occur for ALL cameras with telescopic lens barrels. It's a very common problem in digital cameras. Canon sticks out from the other vendors because they used the cryptic "E18" error code to ... Kodak EasyShare M853 Digital Camera

When I start up my c4000 i get message asking me to format the card. When I do it reads Card read error. i changed to another card and get the same thing. Any suggestions?


Clean the cards with an eraser... or else would need to go to repair center ... Olympus Digital Cameras

I get a Run Time Error asked to termniate in an unusual way message the program asked for a too quick end


... Olympus FE-300 Digital Camera

I have a cyber shot DSC-S80 which has been working fine for ages. However I deleted some photos from the memory stick whilst it was in my computer and now I get the 'memory stick error' message flashing everytime I turn the camera on with it in. It works fine in the computer still. Is there a way round this problem? Tried checking for errors with the windows system of my laptop and says there are not any.


Try to format memory stick with the camera's facilities. Maybe the camera doesn't recognize the stick.\012\012\012You can try another memory stick to know exactly what it happened. ... Sony Cyber-Shot DSC-S80 Digital Camera

Hi I am getting a Lens error message 20e,1,0,0 on our Pentax Optio E30. The lens will not retract.


Hi,Unfortunately, this is a common problem on this model. Yet, no resolution other than getting it repaired.There are a number of things you can try:1. Ensure batteries are fully charged2. Look ca ... Pentax Optio E30 Digital Camera

I turned my Cannon Rebel XT digital camera on and I get an error message as such ERR CF [ 0] what do I need to do in order to get my camera to work?


Hi,\015\012You get this error message due to defective memory card in camera . You need to replace the memory card in order to solve this problem .\015\012Before replacing do complete formatting of the memory card (such as FAT,FAT 32 etc ... Canon Rebel XT / EOS 350D Digital Camera

A friend purchased a JVC HDD camcorder from ebay, supposedly unused and unwanted gift. Everytime she turns it on it asks for the disc to be formatted. When she does it comes up HDD error. I downloaded a manual, followed the troubleshooter and it is no different. She is going to visit her family in Germany at the end of the week and actually bought the camcorder for the journey. should I tell her to get her money back or is it possible to get it repaired at such short notice. Regards Ian Well


Hi,Due to the time constraint, your best bet would be to return the unit and purchase a replacement while doing so.Formatting error indicates a hardware problem, most like the hard disk is requiring replacement. Shock, jarring ... JVC Digital Cameras

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.


Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

Getting error message - lens error 126, 1, 0-9


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Kodak EasyShare C713 Digital Camera

Set up I cannot finish installation of the software because I get an error message that states an error code 1618x17x2951053040x. First, how can I complete the installation process and second, can I charge the battery in the camera using the USB port without completing the installation? I ask this because when I plug the charger into the port, no "ready/battery charging light" is on.Please help. Thank you.


The error that you have mentioned is related to a memory location so you might have a problem with the memory of the PC however I would try and boot the PC in directory service restore mode which is a protected mode in windows and try to install the ... Kodak Easyshare M753 Slim Digital Camera

I am using a Panasonic Lumix DMC-FX12 Digital Camera. I can take photos but cannot view after getting the error message write error..please check the card


Hi,It seems memory card is either requires format by camera or card itself becomes defective.Please format memory card as format memory option is available in Menu and if camera gives still same error message then put another memory card ... Panasonic Lumix DMC-TZ3 Digital Camera

Lens Error. Everytime I turn my camera on I get a message on my screen saying that I have Lens Error. The product doesn't contain any physical damage nor accidents.


I've had this camera for 2 years and have had some problems as well.The lens error message has happened to me twice, and 1 out of the 4 small buttons wont work so I cant see the pictures I have taken. I have also had to exchange it two times because ... Nikon Coolpix S600 Digital Camera

Error zoom panasonic lumix lx3 get error zoom message frequently and can't use.


Sorry, it needs to go in for service.Usually this type of fault happens due to sand/ grit in the mechanism or it has suffered a knock/ drop.If it is grit/ sand then they may just clean the lens mechanism.If it has suffered an impact ... Panasonic Lumix DMC-LX3 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2858 seconds