Having problems with your Panasonic Digital Cameras ?

Panasonic lumix dmc-fx37. Two error messages are now appearing. System error zoom system error o.i.s.


Answers :

Sounds like the focus and (Optical Image Stabilization)drive motors are bound or broken, sadly this normaly means new camera, unless there are no marks on the case and they wouldn't think that it had been dropped or gotten wet, well ya know, they will normaly repair or replace it as long as it is due to manufacture defect.
Repair Help & Product Troubleshooting for Panasonic Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Panasonic lumix dmc-fx37. Two error messages are now appearing. System error zoom system error o.i.s.


Sounds like the focus and (Optical Image Stabilization)drive motors are bound or broken, sadly this normaly means new camera, unless there are no marks on the case and they wouldn't think that it had been dropped or gotten wet, well ya know, they wil ... Panasonic Digital Cameras

Upon trying to turn camera Panasonic DMC-ZS3 on, error message appears: system error (zoom). The lens comes out a bit and then goes back in, shutter closes, then lens comes out a bit again, then goes back in again ... then error message. Can you help? Thanks!


I don't know that I can help you fix it, but I can try.\012Here are my thoughts...\012Check the battery first. If it's like a normal battery, like AA or AAA batteries, replace them and try turning it on.\012\012If it's a flat lithium battery t ... Panasonic Lumix DMC-ZS3 Digital Camera

My camera is coming up with a system error (zoom) message and then locks up. The model ois Panasonic DMC-FS7. When it is switched on the lens zooms in and out a couple of times and them comes up with the message detailed above


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Panasonic Lumix DMC-FS7 Digital Camera

Hi I have a Panansonic Lumix - DMC-FS25. My camera has now developed a fault with the lens which won't go back in. When I turn it on the lens zooms all the way out and then back in again and a message appears saying - System Error (Zoom). Any help would be greatly appreciated, Many thanks Graham


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FZ20 Digital Camera

Panasonic Lumix DMC-FX37. I get a message saying 'System error- zoom' when I switch on. How can I fix it myself? I was quoted £70 to repair it.


HI there its a problem of lensguide pin. May be its damaged or dislocated. It will cost for replacement or repair max 20usd - 70 USD. Thanks. ... Digital Cameras

ZOOM FROZEN HALF WAY OUT MESSAGE SYSTEM ERROR ZOOM DMC FZ28 while taking a picture & changing the zoom it just jammed and now I can only turn the camera on and off and view pictures on memory card. whenever I try to do anything I get the above message


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic Lumix DMC-FZ28 Digital Camera

At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retracts and the camera terns off. i tried to connect with computer and scan for virous, but, when i connect the USB and turn on the camera, the lense retract and tourn off the camera indicating system error 0030.


Hi and welcome to FixYa,Initially, a few ideas you may want to consider:\015\012\015\012ensure that both the built-in 13Mb and the SD memory card are formatted through the camera's features/options ... Digital Cameras

At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retracts and the camera terns off. i tried to connect with computer and scan for virous, but, when i connect the USB and turn on the camera, the lense retract and tourn off the camera indicating system error 0030.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... BenQ DC E610 Digital Camera

Panasonic lumix dmc-fs35 will switch on but lens wont open, makes grinding noise then 'system error zoom' appears on screen. think there might be sand in there but no idea how to fix this, hel


... Panasonic Lumix DMC-FH25 / DMC-FS35 Digital Camera

I have the same camera with the same error message, what is the solution? I can't see it her, just to clarify its a panasonic lumix dmc-fs15 with a system error zoom as soon as I turn it on?? It is a beautiful camera but it has only lasted me a week:(


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a profess ... Panasonic Lumix DMC-FZ28 Digital Camera

My camera felt in the sand, so only tiny particles entered to the eye. The zoom does not work when it is on, there is not a clear image. when I turn on the camera. its lens protection does not opens and a message appears saying that there is a system error (zoom) . What can I do to fix it ands not buy another camera.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-FS6 Digital Camera

Lumix DMC-ZR1 When I turn the camera on, I get a message telling me to turn it off and turn it on again. It does not focus, and the EZ zoom shows all the time whether I press the button or not. I also get a "system error ( focus) " message.


This is a lens mechanism fault. USe can of air and spray on surrounding the lens For cleaning the dust. and then try. ... Panasonic Lumix DMC-FZ28 Digital Camera

Have a Panasonic DMC-FP2 camera and when I put it on message says system error(zoom) how can I solve this problem


... Panasonic DMC-FP2 Digital Camera

PANASONIC DMC-FH24 On startup the lense will extend and then contract. Next i will get an a message "system error (zoom)"


I've had this happen on two cameras. One was dropped while the barrel was out, the other I'm thinking had some sand/grit between the barrels. Find a very small eye glass screw driver (flat head). When you turn the camera on and you can see the barrel ... Digital Cameras

I have a Panasonic LUMIX DMC-ZS19 Digital Camera and the lens seems to be stuck. When I turn it on I get a message that says, "System Error (Zoom)." Any way to fix on my own?


Try these procedures: http://www.fixya.com/support/r13011856-lens_error ... Panasonic Lumix DMC-ZS19 Black

I have a Panasonic DMC-FZ28 camera and get a system error (zoom) message. ive removed the battery and restarted. no change. NO buttons work


Hi,\015\012\015\012\015\012If the System Error (Zoom) message is displayed on the digital camera, switch the camera OFF and ON again 2 or 3 times.\015\012\015\012\015\012There may be any of the three fault in your device.\015\012\015\012 ... Digital Cameras

Panasonic dmc-fh22 camera when turned on displays a system error (zoom) message on the LCD


Hi,System error zoom message shows some thing wrong in lens mechanism and it is not user level repair/ fix.Camera will take apart, lens assembly will be replaced to resolve the issue and all that process need expertise of qualified camera ... Panasonic Lumix DMC-LZ2 Digital Camera

Help:D At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retract


At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retract ... Digital Cameras

I get a message: system error (zoom) - Panasonic Lumix DMC-FZ28 Digital Camera


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\01 ... Panasonic Lumix DMC-FZ28 Digital Camera

I too have the same problem with my DMC-FS15:- When I turn the camera on in either record or review mode, I get a system error: zoom message after a few seconds, and the camera is inoperable. Then when I turn the camera off, the lens does not retract. Is there updated software that can be downloaded and installed via the supplied USB cable, or any other fix? Regards Martin J


Well perhaps it is just the battery I wonder if this problem isn't simple a bad battery try a replacement, as sometimes they just go bad, and this is indeed a symptom of a battery not working properly. If you have an original power supply, then try i ... Panasonic Lumix DMC-FZ28 Digital Camera

System error ya my digital camera coolpix 885 was just working fine,with no problems,then suddenly i tried zoom in and zoom out,took a picture,and the next moment i see all the images taken henceforth are blurred,tried everything clicking pictures with and without flash,zoom in and out and other things,it still does'nt work so i thought i ll switch it off n then restart and hell it gives an error message "system error". so as usual i removed my battery and replaced it back still it shows "syste


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a pro ... Nikon Coolpix 885 Digital Camera

System error ya my digital camera coolpix 885 was just working fine,with no problems,then suddenly i tried zoom in and zoom out,took a picture,and the next moment i see all the images taken henceforth are blurred,tried everything clicking pictures with and without flash,zoom in and out and other things,it still does'nt work so i thought i ll switch it off n then restart and hell it gives an error message "system error". so as usual i removed my battery and replaced it back still it shows "syste


The following blog outlines some repair options for a lens error:\015\012\015\012http://camerarepair.blogspot.com/ ... Nikon Coolpix 3200 Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work. hi expert i m suffring in this error on my panasonic DMC-LC33 when i switched on


Try \015\012\015\012Klomtrix trick this worked with my camera\015\012thanks klomtrix ... Panasonic Lumix DMC-LC33 Digital Camera

Faulty d40x hi i bought a d40x off ebay the other day and couldnt wait to start snapping.... problems: - The error message "initialization error. Turn camera on and off again" appears. Upon turning the camera off and on again, the same message appears. After several times trying it still does not work. Also, the menu screen appears, and just keeps flicking from menu to menu constantly. As well as this, on the playback mode, the picture of the image displayed keeps zooming in as far as


I would start by looking at all of the push buttons on the camera. One may be stuck down. ... Nikon D40x Digital Camera

Lumix DMC-ZS6 System error "zoom"


... Panasonic Lumix DMC-ZS6 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2996 seconds