Having problems with your Panasonic Digital Cameras ?

I want a Main PCB of GS-57GC Part code is LSEP8331S1


Answers :

Hi.

LSEP8331S1 is not the main PCB, but the camera PCB. This camera has two PCBs.

The camera PCB is not available for online purchase.

Here the parts number applying to your model. None of them is available for online purchase.

LSEP8331P1/ LSEP8331Q1/ LSEP8331R1/ LSEP8331S1

Here the number for main PCB
LSEP8330P1

Both boards can be ordered from Panasonic

Here the service manual, check page 96-98 for parts numbers.

When you are sure about the part you want replace use google to find a seller in your area.

Here a distributor with main pcb for your model:

\015\012UED.net Catalog



Please contact Panasonic parts center http://www.pasc.panasonic.com/ National Parts Center at 800-833-9626.
Repair Help & Product Troubleshooting for Panasonic Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I want a Main PCB of GS-57GC Part code is LSEP8331S1


Hi.LSEP8331S1 is not the main PCB, but the camera PCB. This camera has two PCBs.The camera PCB is not available for online purchase.Here the parts number applying to your model. None of them is available for online ... Panasonic Digital Cameras

I have a Panasonic VDR-M50 camcorder. I was attempting to finalize several DVD-R discs and received two different error codes : 0901 and 0280. After receiving the codes, the camcorder locked up and refuses to even correctly access the disks now. I really don't want to lose this data, and Panasonic technical support wants me to send in the camera. However, the camera successfully finalized other discs in between the ones with errors and also still properly records on a new disc. Please help!


Hey there\015\012\015\012those errors are read/write errors done with the blank disks. this usually happens when the it writes too damn fast or slows down. Heat is also one factor from successive burning...you will get random codes like t ... Digital Cameras

Error code 5e02 code on screen when switched off. Tries to rectify itself when switching on, but srange noises from camera, and goes into shut-down mode. It appears to want re-booting, but how ?????


Hi , i had the exact same problem as well. See my other reply to another user in this forum.I still had my 2 year guarantee ( European ), and sent it back to Olympus.They have told me that the zoom mechanism is broken ( which i figu ... Olympus Stylus 700 / 700 Digital Camera

I want to redeem (I don't know what) something with a code provided to me with a 8GB flash memory but I don't know where to enter the code.


... Digital Cameras

Canon pc1251 I need to replace a PCB and so I want to buy a 1 no of PCB for Power Shot A720 IS camera


You may order the part from here. ... Canon PowerShot A720 IS Digital Camera

I was wanting to buy another lens for my cannon S3IS. Are they out there and where can I find one. I want to use it mainly for photos at target shooting events-Rifle.


Hi,Yes you can purchace another lens for the SLR camera, you should be able to find one at a reputable camera store.Regards. ... Canon PowerShot S3 IS Digital Camera

I want code line connector with pc.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... Sony Digital Cameras

Card setup When I turn on the camera, it goes straight into "Card Setup". My only options are to "Format" (i.e. erase the memory card) or "Power Off". There doesn't seem to be any way out, or back to the main menu. When I connect the camera to my PC, it shows me the "PC/Print/Exit" menu, but that's as far as it goes. Likewise, the PC won't detect the camera attached via USB port. What can I do? I don't want to lose all my pics.


Use a card reader to download your pics.\015\012\015\012Then, go into the camera menu and find "reset"...follow the on-screen instructions. Then, insert t ... Olympus FE-170 Digital Camera

Hi I am from Mexico I can say that I am an expert in Digital Cameras, specially Canon. Currently I am repairing a EOS Digital 350D, I changed the pins, but when i tried it, it shows ''CF error''. Could you give me a tip? I know if i changed the Main PCB the problem is solved but i think that some internally in the board was damaged, maybe some one can give a tip. Thanks in advance.


... Canon Rebel XT / EOS 350D Digital Camera

I have copied and pasted someone elses problem, because it is the same one I am having. So if I want to use the aperture for taking Manual photos I cannot do this because when it goes off of F22, it reads FEE, error. "I have nikon d80 with the fEE error code blinking... I know this means that the aperture is not locked at the 22 but it will not allow me to change the aperture settings. Please help us!!!"


Lock the aperture ring at its smallest opening (in this case, F22). Change the aperture setting by turning the subcommand dial (the one in front, unless you changed it in the setup menu).Of course, you can only change the aperture directl ... Nikon D80 Digital Camera with 28-80mm Lens

Err 99 Doesn't matter what I have tried, I am still getting the ERR 99 code on my digital rebel. I have cleaned, replaced the battery and cf card, changed lenses, cleaned lens connections. The second I attempt to take a photo it displays ERR 99/Any other suggestions? Canon wants over $200 to fix it and I can buy another one for not much more than that now. I just hate to throw this one away!


Cleaning the contacts ought to be done using a pencil eraser(i am very specific about this)to fix this errorvigorously scrub the lens contacts with an eraser. Then  gently\015\012use the eraser to clean the camera contacts (holding the con ... Canon Rebel XT / EOS 350D Digital Camera

V570 Kodak v570 - error code #B03 displayed on screen a & lens stuck open. and nothing. plugging into mains - nothing. removing and reinstalling battery_ nothing. what to do?


VHelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Kodak EasyShare V550 Digital Camera

Canon 400D Main PCB was not functioning. What is the cause?


MAIN PCB MIGHT BE DAMAGED OR CHECK THE FUSE ... Digital Cameras

Keep getting a code 1312x17x4252799284x and want install program.


I?m not sure if you?re fault code is showing on the computer, Easy Share Software, or the camera itself. Therefor I will list 2 possible solutions: If the fault message is on the LCD on the camera: There is no firmware available online for this camer ... Kodak EasyShare One Digital Camera

I want to put pictures on my vista quest 500 keychain viewer but i keep getting this error Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)


... VistaQuest VQ-5115 Digital Camera

Flexible circuit from the buttons to the main PCB has snapped on Fuji F470


The only way is to contact the service center as such components are not available outside. ... Fuji FinePix F470 Digital Camera

Forgot security code wants to reset unit - Digital Cameras


Call the 1-800 number in your book and they will give it to you. As long as you did not reset it. If you did they will tell you how to change it. If you do not have the book google the manufacturer and then call them or send them a email\015\ ... Digital Cameras

Hi, I have a Canon IXUS 40 digital camera - My lens suddenly does not want to close and show me an E18 error code on screen - what is the problem?


Hey there johans, the E18 error code indicates there is a problem with your lens unit or lens cover. It was probably the result of an impact of some sort, or you may have something such as sand or dirt jammed in the device. If you cant see anything t ... Digital Cameras

Connectors position on main PCB


Thanks for the information ! ... Panasonic Lumix DMC-FZ20 Digital Camera

My computer wont reconize my camera FinePix A820 says it has registry problem, not complete or damaged Code 19...havnt had a problem with my camera before ...want to put pictures on to my computer but now cant ??? I normally plug my usb cord into pc then camera, then auto play starts and i transfer my pics , ...I cant find my original disk that i got when i bought my camera what can i do ?


Use a cardreader to download your pictures. ... Fuji FinePix A820 Digital Camera

Casio ex-z75 I have a casio that has gone to a "scrambled" screen. I saw on a post on FixYa that you suggested that the main board needs replacing. Can you elaborate on the repair and maybe how much that would cost. The camera is not an expensive one, so I want to see if it's worth it to repair. Thanks, Gregory Mellies [email protected]


Hello, we are in Australia and the cost of the repair is very expensive due to the part cost.\015\012\015\012Depending exactly what Casio you have will determin weather it is a main board issue or something else (may be alot cheaper) but ... Casio Exilim EX-Z750 Digital Camera

I got my Canon a590 this past christmas; since then, every so often, it will not show any image on the screen. All I can see is the menu options. Every time I want to take a picture, all I get is absolute black. However, I can view pictures on a memory card with no problem on the main screen. The last 3-4 times this happened, the problem usually went away within a few days. I've tried replacing the batteries, but to no avail. Is my lens bad, or is it due to a more intricate problem?


Your camera should still be covered under the one year factory warranty. I would go to the Canon website and contact them for a covered repair if I were you.\015\012\015\012Best regards,\015\012Bob ... Canon PowerShot A590 IS Digital Camera

Disassembling camera I have a GE A730 camera that was dropped. I think I can fix it If I can disassemble it enough. The problem is I can only get the back cover with the LCD screen off. The main board is loose except for a dozen solder points to the small top board, and a few wires. I really don't want to do any soldering, but I can't see how else to proceed. Anybody know what comes off next and how?


Hi pantherdave:The premium Assistance plan will work, if the one you are asking knows the problem.No, all the money does not just go to just the owners of the site. Each EXPERT or the one who solves the problem will get a portion of the a ... GE A730 Digital Camera

I don't have a manual to interpret the mode codes...I have the pictures downloaded to a disk..Now I just want to clear the camera so my neice can use it again...


I have just bought one of these rubbish cameras for my daughter, if you press the Mode button 6 times the screen should say 25 with the image of what looks like a Wastepaper basket, press shutter button and it should delete all the pics hope that hel ... Jazz JDC9 Digital Camera

Hi my name is Jon Holyoke from bucksport maine i baught a sakar vga miro digital camera 3 years ago and just found it recently in my apartment i want to use it for my webcam like i used to but i got a new computer and i cant find the disk for it . is there a driver i can install so i will be able to use my camera finnally?


Please get it downloaded at :\012www.sakar.com/thumbnails.aspx?categoryid=170\012\012 ... Sakar Digital Concepts VGA Micro Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0867 seconds