Having problems with your Panasonic Digital Cameras ?

PV-DC152D CAMCORDER, LCD Display only works if it is pulled out, turned 180 degrees and pushed back into place so the display is facing you. If you move the LCD display over 3/4" away from camcorder it will go black again. Personally, I think this is an issue with some sensors that gauge when to turn on the LCD display "ON" and Viewfinder "OFF" and vice-versa. Any help on this would be appreciated since there is nothing else wrong with the camcorder.


Answers :

The most likely problem is a cracked ribbon cable that goes between the camera and the display. The cable needs to be replaced. Typical cost for this is around $40 or so plus labor. I would not suggest that you attempt this repair yourself as opening up these units is not easy without experience. Also, there are cables that can be damaged if opened incorrectly.
\015\012
\015\012Dan
Repair Help & Product Troubleshooting for Panasonic Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

PV-DC152D CAMCORDER, LCD Display only works if it is pulled out, turned 180 degrees and pushed back into place so the display is facing you. If you move the LCD display over 3/4" away from camcorder it will go black again. Personally, I think this is an issue with some sensors that gauge when to turn on the LCD display "ON" and Viewfinder "OFF" and vice-versa. Any help on this would be appreciated since there is nothing else wrong with the camcorder.


The most likely problem is a cracked ribbon cable that goes between the camera and the display. The cable needs to be replaced. Typical cost for this is around $40 or so plus labor. I would not suggest that you attempt this repair yourself as open ... Panasonic Digital Cameras

My cibershot DSC-F717 does not have anything in the viewfinder and the LCD displays the settings and options.The screen is black with yellow words and numbers Also my zoom will not work. The LDC does not have an image on the viewfinder nor the LCD. I do have the LCD setting options displayed. The zoom will not show where the setting is on the LCD and I have checked all the settings (the focus on the zoom mode, conversion in the set up turned to off).


HelloThank you for using FixYa for your problemYour camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras ... Sony Cyber-Shot DSC-F717 Digital Camera

Camera shows no image through the viewfinder or on the lcd screen.pressing shutter button will actuate the camera, but only image is of a black box.using the display button to turn off the lcd does not help. the information icons show both in the viewfinder and on the lcd. camera has not been subjected to any abuse of any kind. has not been used for about 2 months


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot S3 IS Digital Camera

Blank lcd I just got a new canon 600D. After playing with it for a while, i turned it off. Then after 5-10 mins i turned it on once again, and opened the lcd screen, but it shows blank(or say black). I can see that the lcd backlit is workeing, but nothing (no content) is displayed. Can this be an issue of low battery ? pressing the shutter button full also not capturing the picture. Flash works though, and optical view finder too, but it does not capture the photo.


Hi there:Some symptoms of a defective CCD include distorted images or abnormal colors, scratchy purple lines, blank or black pictures, and/or black videos with good sound being recorded on the camera's flash card. ... Canon EOS 600D Rebel T3i Digital Camera

LCD Screen Okay, Like an idiot, I turned off my LCD screen, long ago, so that I could use the viewfinder since both cannot be used at once. I would simply like to know HOW TO TURN THE LCD SCREEN BACK ON!!! it has driven me crazy, the book doesn't help, I have gone through resetting to default settings and nothing. I think I have really changed something in the setup and I hope I can reverse it. Anyone with a solution??? Please??? Driven Crazy by cam Rebecca


See this knowledge base article at Canon: ... Canon EOS-20D Body only Digital Camera

My lcd screen won't come on. The viewfinder is working fine. The display button clears and replaces information on the viewfinder but it will not turn on the lcd. The camera is taking good pictures.


Hi. Problem might be shutter is stuck or the CCD sensor is having the problem. Please cehck this link for possible solution. ... Canon PowerShot S3 IS Digital Camera

Canon Power Shot S1IS 10x optical zoom 3.2 mega pixels: I turn the camera on and cannot view any subject images either through the viewfinder or LCD screen. The cap is off and the LCD screen and viewfinder are completely black. The display information works fine.


Hi,\015\012Your Canon S1IS camera has defect in CCD Sensor and Canon will repair it Free Of Cost. For details, please click ... Canon Digital Cameras

Lcd display not working on nikon d40. When we turn on the camera, and take off the lens cap, the lcd display is black. we can use the viewfinder to take a photo. We can view the image after taking the photo, but can not see the image prior to taking the picture.


The D40 works the same way SLRs have worked for the past half century. Only recently have dSLRs acquired a "Live-View" capability, where you see the image on the LCD monitor instead of through the viewfinder.I realize this probably wasn't ... Nikon D40x Digital Camera

My Panasonic Lumix FZ8 has a problem with it's LCD Display. If I use the ViewFinder everything is OK,but when I turn ON the LCD,the camera turns OFF. What is the problem?


If the battery is low it will do this. It requires more battery to operate the lcd than the viewfinder. Also, check to see if the power save mode is on. ... Panasonic Lumix DMC-FZ8 Digital Camera

When I turn the camera on the lcd and viewfinder only display setting icons the rest is black. The lense does extend. Display and viewfinder work in view mode. Whats the problem? Is it worth repairing? Is there anything I can do? recommended repair center?


Hi there, Here is something to try:\015\012\015\0121. Set the camera toTV mode\015\0122. Set the shutter to 15 sec\015\0123. Click to take a photo/image/video like you normally do.\015\0124. During the 15 seconds _a abo ... Canon PowerShot S2 IS Digital Camera

KODAK P850 When I turn the camera on the LCD screen pops up the language settting and english is highlited.. None of the controls function it is like it is frozen. I move the dial to the off position it does not turn off, the only way to turn it off is to remove the battery, when i do that lens stays out. The camera is useless now.. I have to think it is a software issue. Does kodak repair cameras. I bought it in June OF 06 I am not ready to buy a new camera.....


Hi sir please find whether the memory card is corrupted.. ... Kodak EasyShare P850 Digital Camera

Orange LCD When I turn on the camera the LCD on the back of the camera is very orange to red in color, but I can see the display, menus, etc. After a few minutes everything seems fine. Is this a bad LCD or just a common issue with this model? If it is a problem will it get worse?


Could well be a bad backlight. There are replacement LCD assemblies on Ebay for under $45, and as a good working 5050 is worth $200 or so, it's worth doing. ... Olympus Camedia C-5050 Zoom Digital Camera

Coolpix L18: The LCD screen is broken; just displays a large black "blob" on a white background. Would this prevent all other camera operations? When the camera is turned on, the green power light flashes, but nothing else seems to work. Camera will "beep" when shutter button is pressed, but lens never opens. Is this a LCD issue, or are there other problems as well?


... Nikon COOLPIX L18 Digital Camera

The display on a NIKON D5000 is upside-down. Both the menus and the live feed viewfinder display upside-down. Problem happened after camera was dropped, but I can't think of a hardware issue that would cause this. Suggestions?


... Digital Cameras

Lcd display will not come on. It worked last time I used the camera. When I turned it on this time only the internal viewfinder display works.


No display,are u getting recorded in the memory card,if not it is problem of shutter,not functiong to form image,see a camera tec. ... Canon PowerShot S3 IS Digital Camera

Green screen My coolpix 5700 is displaying a distorted green screen in both lcd screen and the viewfind, but when picture is taken the image turns out not good, but not as bad either. Please help.


I am so greatful for the solution by "scottinga". I had used the camera for the past two days with no problems. After going through airport security and held up by a passenger trying to take everything on board but the kitchen sink who was ultimate ... Nikon Coolpix 5700 Digital Camera

My camcorder seems to think the lens cap cover is on even though it's not! as a result i get no picture in the lcd or viewfinder


There is 2 possibilities. One is defective CCD imager IC, which do not generating picture signal and 2nd is Lens Cover Switch, which is not funtioning properly.\015\012Please check both of them. ... JVC Digital Cameras

My Minolta 7D anti-shake appears to be broken. When turning on the camera it hums for several seconds then will not fire...the shutter button being inoperable. All of the anti-shake lights in the viewfinder are lit, and do not go away as per norm. I also think this might be a heat issue. Doest anyone have any solutions to this problem besides costly repair?


Its not a heat issue. The Anti-shake goes off as soon as the shutter opens and closes in split second. This is most likely to be a shutter release mechanism related problem. Since the shutter is taking too long to open/close the lights are not going ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

LCD does not come on after turning the camera on.The camera has worked fine until a few days ago.The display does work when reviewing previously taken pictures or when using the menues. Could this be a set up problem? What do you think? Thank you, Bill


Hi there,this was noting to do with the setting you made there. did the camera logo appear when you press or you turn On the camera. if not this is a LCD error on the cam, it need to repair. ... Nikon D80 Digital Camera with 18-200mm Lens

When I turn on the camera the lcd screen is black despite removing the lens. when i switch to viewfinder it is also black. camera will display images on card in playback mode


... Fuji FinePix S7000 Digital Camera

Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho


I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera

My Samsung TL220 lens won't close. It doesn't display an image on the front or the back. However, when I trigger the menu, the lcd displays "No Image File". It does go through and displays all the different menu options, so the lcd must be o.k. Could this be fixed with software or software update or do you think this is a hardware problem? ( I've noticed several TL220 that have this problem.) Is it an easy fix & how much do you think it would take to fix? Thank you.


Well, there must be a setting that was unintentionally set. First, I need you to try restoring the camera to its default settings. Go to Menu settings and then choose Reset. Let me know if this works or not so that we can move forward to other fixe ... Samsung DualView TL220 Digital Camera

I selected open folder to view pictures. The f: file display DCIM. I clicked it and it display Olympus displaying pics. I name a couple of pics in the slide. I wanted to change the folder name I went hit delete. I turned the camera off and then turned it back on. I turned camera back on thinking (how dumb) I restart process again. DCIM displayed. I renamed it "Digital Camera". It display Olympus. I clicked on Olympus renamed Holiday 2009. Then clicked on it - it says this


It sounds like you deleted the images. If you are downloading images from your camera or card....you should open the folder to view images. hold control key down and select all images that you want to download. right click on them on click save. ... Olympus D-595 Zoom Digital Camera

Camera repair The LCD display is white with red lines going through it. Even the viewfinder does the same thing -- white. When I hit the view button, the same thing sometimes. It seems to do worse outside. You can faintly see the pictures I took in the LCD display. Now the LCD display is totally black. What's wrong. The menu display still works. What can I do?


Time for a new Camera. It is about 150.00 to replace the LCD. it is cheaper to replace it unless you can just use the viewfinder alone!! ... Kodak EasyShare Z612 Digital Camera

LCD display The LCD display of my Fuji finepixa350 doesn't work anymore. When turned on it just turns into white color.


This is either a connection failure of a main board problem.Try to squeeze the base of the camera and the top over the screen or simply hold it in one hand and slap the bottom gently but repeatedly.The idea is if it is a connector problem ... Fuji FinePix A350 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3245 seconds