Having problems with your Panasonic Digital Cameras ?

I have a Panasonic PVGS19 Mini DV Camcorder. The problem is the flip screen. Will not work when fully open. There is a picture when it is opened at about 1/4 of the way. Also, when opened and flipped over ( self portrait mode) and closed the image is upside down. Thinking it is a mechanical connection between the camera and the LCD that either need some cleaning or repair. Can I do this myself? Not cost affective to have repaired by service, I am sure. Thanks Bob http://www.fixya.com/lpregis


Answers :

There is a small flat ribbon cable between the camera and the LCD display that probably has a small crack in it. Move the cable the right way and it works. The cable neds to be replaced. This is NOT a repair to be done by anyone without prior repair experience as there are too many cables and connectors that can be damaged easily.
\015\012
\015\012The repair shouldn't be too much as the hinge with the cables (part number LSXY0764) is only $17.14. Add in the local labor rate for the total repair cost.
\015\012
\015\012Dan
Repair Help & Product Troubleshooting for Panasonic Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Panasonic PVGS19 Mini DV Camcorder. The problem is the flip screen. Will not work when fully open. There is a picture when it is opened at about 1/4 of the way. Also, when opened and flipped over ( self portrait mode) and closed the image is upside down. Thinking it is a mechanical connection between the camera and the LCD that either need some cleaning or repair. Can I do this myself? Not cost affective to have repaired by service, I am sure. Thanks Bob http://www.fixya.com/lpregis


There is a small flat ribbon cable between the camera and the LCD display that probably has a small crack in it. Move the cable the right way and it works. The cable neds to be replaced. This is NOT a repair to be done by anyone without prior repa ... Panasonic Digital Cameras

Sony dsc-13 I have sony dsc-13 digital camera and suddenly after switching it on in picture mode and video mode the data(day nd time,flash....etc) appears on a black background on the lcd though the lens door is open and i can see my previouly stored pics in the camera lcd and also in my computer after connecting through usb.. so the problem is i take black pics and videos while the lens is open and the charger attached or on full battery,and the new taken pics displays black as well


Basically it is a Japanese Model from where u bought it u are lucky u can\015\012get it free of charge replacement just tell me which region u belong\015\012there is a known issue of CCD failure u will get free of charge repairs\015\012fo ... Sony Cyber-Shot DSC-T3 Digital Camera

I have a swing-out LCD display on my powershot camera when opening the LCD display the image appears upside down how can i resolve this? there were never problems in the past.. when closing the lcd display on the back of camera with the display face-up no image shows..i would really appreciate help to resolve this problem as i'll be going on holidays soon..thankyou..Anna


The camera requires partially dismantling in order to fix this. if you cannot do it yourself then you will have to take it somewhere but be warned it wont be very cheap. If you live in new zealand i could do it for you however unlikely that is. ... Canon PowerShot A85 Digital Camera

Installing a Sandisk 4GB memory card in my Samsung Digimax 130 camera produces an alert "card error" on the LCD display. Can I fix that? Connecting to my PC's USB port doesn't allow me to take photos or format the card, either. I get the "card error" alert no matter how I configure my connections to the camera or a card reader.


Card error means the camera wants you to format the card in the camera, not the computer. ... Samsung Digimax 130 Digital Camera

Hi, I love my FE-340 camera but it seems the lens mechanism is messed up. When I turn it on it either opens halfway and then closes again or it tries to open but can't. I would like to get it fixed but not sure where or how much it will cost. I have had the camera for 2 years for is out of warrenty. Any help would be appreciated, Frances


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Olympus FE-340 Digital Camera

My daughter's Sanyo VPC S1070 digital camera shows a Lens error code: 0x15110000. I've tried to look at/download pictures and it won't do that either. It has 10.o megapixels and was purchased at Christmas. The lenscover doesn't open either and no images show on the LCD screen. I won't say powered on for more than a second, just long enough to flash the message.


We have the same problem with our sanyo...does anyone know the manufacturers number...walmart would not take it back cause we threw away the box..so we are stuck with a camera that does not work and spent alot of money on it. any suggestions??? ... Digital Cameras

Downloading After I installed the downloading software and connected the camera to the computer properly, I get the message box to open with the canon camera downloading program, I select it and click okay and nothing happens.  Any ideas what I'm doing wrong?  Zoombrowser and eos utility don't do anything either.


Hi, In dowloading picture it must be in play mode to detect camera by your computer try it now , insert usb to camera and computer you can hear alert beep , the downloading icon will appear either from operating system or cd supplied by camer ... Canon PowerShot A560 Digital Camera

Today when i connected my camera to my computer i thought of copying pictures from my pc to my camera. I opened 'My Computer' and opened the folder of my camera. There I pasted one of my photos. While copying they said that it might not open or not be copied, but still i continued. When I disconnected my camera and opened it, I saw the photo i had copied there(in the camera). After that I thought of copying more pictures into the camera. Again I connected it to my pc. This tie again that message


If all the pictures you copied were originally taken with this camera, then it is certainly because you modified this particular image - renamed it or a rotation from portrait to landscape.....If this is not a picture taken by this camera ... Digital Cameras

When I connect the Samsung s860 digital camera to my Macbook Pro the computer does not connect/recognize it. I tried opening the Window's drive portion of my macbook and still no recognition of the camera. I also opened I photo to try to import-- can't find the camera. I installed the Samsung software on the Windows side of my mac, opened the software, but still the software cannot find the camera. It acts as though the camera is not even connecting to the computer... but the cable is good and t


Do what the pros do...use a card reader to download to a folder you create on your desktop. ... Samsung S860 Digital Camera

I have a SVP CDC-7530 digital camera which I feel has reached the end of its life given that as it turns on, but no one is home. I turn it on, but whether you have it connected to a PC, or on any of the camera/viewing/recording setting nothing shows on the LCD & it won't turn off until you open the battery cover.


... SVP CDC-7530 Digital Camera

Fujifilm 10.2 mega pixels digital camera w/SR Auto Scene Recongnition 2.7 LCD. The batteries were dying, we put others in and it won't turn on. We plugged it into the DC outlet (still won't turn on). Connected it to the computer, it won't turn on. (you have to turn it on in order for the computer to recognize it, I think) Anyway why won't it turn on? The lens is stuck in the open position and we just wanted to get enought power to it to close the lens. Can you help?


Maybe the problem is the kind of batterys, change another brand an try remember you need a nikkel batterys ... Digital Cameras

6 month old Canon Power shot S5IS flip out LCD screen will not keep connection, the screen goes blank and can not be used. I primarily use this feature to take my shots. When I opened the screen to take my shot I notice I had to move it around and the screen came on. Now it will not come on no matter how I move the screen, up, down, right left, twisted into the body. It does not work. Looking at the body of my camera the screen is not loose, nothing looks abnormal from the outward appearan


Canon will fix this under warranty. Call 1-800-OK-CANON. ... Digital Cameras

No connection between camera and computer, sometimes it connects but won't stay connected long enough to download pics. Its not the wire as it has worked with a different camera. I tried putting the memory card in another camera and using different computer but that didn't work and after taking the memory card out of that camera it no longer will connect either.


Please make sure that "mass storage" is set under connections when your using the memory stick to transfer pictures. ... Sony Cyber-shot DSC-T70 Digital Camera

When i turn on the camera the lens wont pop open even when the battery is fully charged.... i was taking pictures and it working fine turn the camera off and on again then the lens wont open anymore? i can still view all the pictures i took from the camera but cannot take pictures anymore coz of the lens wont open. i tried initializing the camera by going to set up it didnt work..msg error said turn the camera off and on again and i did but didnt work either many times i tried please help thnks!


The problem is\015\0121- some dirt somehow got on the outside of the lense. After it was retracted fully in, it prevents the camera from opening again. When you turn it on, if it opens a little bit, try to pull it out NOT too hard and let go ... Sony Cyber-shot DSC-N2 Digital Camera

Olympus FE-320 Digital Camera will not transfer photos to Computer via USB port hook up. When connected and PC or Transfer selected, screen message on camera says "Wait" and never connects. When Olympus Master 2 program opens on computer it does not recognize Camera Connection and continues to search for Camera so no images can be transferred. This combination did work in the past but has stopped. All updates have been applied. Need help.


I'm sorry that the Camera is not recognized by the Computer. Unfortunately, knowing the Operating System is the key element in providing troubleshooting the PC connection. However, I will give you the troubleshooting steps which is general for ... Olympus FE-320 Digital Camera

Can't connect to pc through the usb port. I used to be able to connect the camera to any pc by connecting with the cord to an usb port - all I did was connect and switch on the camera and it gave me the option of 'computer' and then it would give me the option to open the files and download onto the pc, but now when i plug it into the usb port and switch the power on the camera just switches on and does not show up in the computer at all so my photo's cannot be downloaded onto my pc


Hi, ... Casio Exilim Pro EX-F1 Digital Camera

Hi my Samsung PL100 used to work fine when i used to connect the camera with my laptop there would be 2 folders on my screen one being DATABASE and the other one DCIM , I used to open DCIM nd copy the pictures....... but recently when i connected the camera with my laptop for transferring pictures DATABASE and DCIM folders do appear on my screen but the DCIM folder does not open and the folder is kind of blurry its some kind of a virus because same type of folder problem appeared in my USB but h


... Digital Cameras

Have a Sanyo VPC-5500 camera. I'm tying to connect it to my computer to download some pix. I've followed the instructions in the manual and then connected the cord from the computer to the camera. However, when that's done, the software which is supposed to open for downloading doesn't open. I sometimes have this problem and never can figure out why.


Download to a folder you create on your desktop. Then, open the software and click on "file" at the top and then "open"...choose that folder and it should open in your software. ... Digital Cameras

Lens error Hello, my son has a Nikon Coolpix L11 camera. Today he took it to school for the last day of class to get pictures of his friend. He says that when he took the camera out of his pocket, he noticed that the lens was half extended and open. When he turns the camera on, the lens assemply does nothing and the lcd displays a lens error. We have attempted removing the batteries and even trying fresh ones, but to no avail. I'm leary to open the camera without knowing first what I need to


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Nikon Coolpix L11 Digital Camera

Hi there, I used my camera in sea for many times, always was working nice. But some days ago I went to sea and the camera stopped working the flash. I left overnight off and next day it was working normally again. Then when I went to sea again (always about 2 or 3 metres deep) and the camera simply stopped work. I opened the card and batterie compartment was dry and fine, when I opened the compartment where I use for connect the USB cable was very wet. I left the camera off for 3 days to dry and


It still amazes me how many people buy these cameras that are seemingly "waterproof" and eventually have the very same problems you are now having. The only true underwater camera is one in an underwater housing. ... Olympus ? 1030SW Digital Camera

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes


Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

When I connect my camera to my PC, the software for transferring pictures from camera to computer used to open up immediately. However, now it doesn't. In fact, the computer doesn't give any sign of recognizing the camera, despite the camera being connected to the computer's USB port with the power on.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon IXUS 80 IS Digital Camera

I own a canon powershot S3 is and I am getting this strange E24 error where in the camera lense would comes out and just goes in . Another interesting thing I observed is when the LCD is on and I am in the image display mode (That is browsing the existing images) then there is no problem if the LCD panel is open or closed the camera just seem to respond normally, only when I change to the shooting mode the camera lense would come out and go in with the camera shutting down. what is problem with


It sounds like it needs to be serviced. If you're out of warranty, then go to this site: www.camerasandparts.com They just service the Canon Powershots exclusively and they ... Canon PowerShot S3 IS Digital Camera

I have a samsung digital camera l201 accidentally full when I check the LCD image is white can I check LCD connection inside give some guide to check the connection at LCD.


My samsung L201 didnt show anything..the screen is white..I remove the battery nothing happens..what seems to be the problem? ... Digital Cameras

Just got a 500mm f8.0 Telephoto Lens for my Nikon D90. When I connect it according to the instructions I am certain I have mounted the lens properly to my camera, I have a universal T mount to connect to my Nikon. When I turn on the camera, It flashes in the top info LCD F- -, My thought is that this is the F-Stop or the Focal length which I will need to select on the lens and input on the camera somehow, am I on the right track since I am a novice. It will not take a picture through this len


The lens lacks the electronics to communicate with the camera. You must switch the camera to Manual exposure mode by turning the mode dial to M. The lens has only aperture, f/8, and so you have to control the exposure by changing the shutter speed an ... Nikon D90 Digital Camera with 18-105mm lens
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5539 seconds