Having problems with your Panasonic Lumix DMC-FS4 Digital Camera ?

Hello, I have 2 problems with my Panasonic Lumix DMC-FS4 Digital Camera. Firstly, at the lower left corner of my screen, there is a dark shade. So in all my pics, there is sth black on the lower left corner. Secondly, I can't zoom to the maximum, it says "turn off the camera" or " system error (Zoom)". Any help will be highly appreciated. Thxs :)


Answers :

Hello

The problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair \012center for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

Hope \012the advise is useful.

Regards
Andrea
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FS4 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hello, I have 2 problems with my Panasonic Lumix DMC-FS4 Digital Camera. Firstly, at the lower left corner of my screen, there is a dark shade. So in all my pics, there is sth black on the lower left corner. Secondly, I can't zoom to the maximum, it says "turn off the camera" or " system error (Zoom)". Any help will be highly appreciated. Thxs :)


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-FS4 Digital Camera

I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"


Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras

Zoom problem The camera I have don't allow the zoom to come out, when I turn camera on it says "zoom error" and then I can't do nothing on camera,not even look at pics I have taken. It does it alot, sometimes the camera will turn on without saying it,but it's very rare. And sometimes I can turn it on and it will say "zoom error" but if I press zoom in the camera will work. But it's very rare that it works. I love the camera and hope there is a solution.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Zoom DualCam 1300 (1599) Digital Camera

I turn my camera on and istantly it says zoom error and the lens goes back inside the camera i can view pictures but i cant not take them


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Fuji FinePix A345 Digital Camera

Cant turn camera off. lens is out for zoom. When I press button it just clicks. Eventually says lens error. restart camera.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot A1100 IS Digital Camera

I turn on my Pentax Optio e60 camera, and the lens opens, but i dont think it has extended to its maximum. and the display screen is black and i cant take photos and it says 'lens error 0x4110000' then turns itself off. very annoying and please help me fix it.


See http://www.fixya.com/support/r13011856-lens_error ... Digital Cameras

I hit something on my camera that each time I take a picture, the preview is a tiny picture in the upper left screen and there are yellow outlines around areas of the picture and in the lower right corner, it shows a zoomed preview of the area captured in yellow. The picture turns out fine, but the preview is annoying to me. HELP!


When you are in the playback mode, you can use the zoom function (as you use it when you take a picture), this will zoom into the image you took.the yellow frame show you where you are in the full image. ... Canon PowerShot SD1000 Digital Camera

I dropped my panasonic lumix digital camera to the ground and now every time i turn it on it says "error(zoom)"and the back round is blurry and i cant view anything;please help!


... Panasonic Lumix DMC-TZ1 Digital Camera

Blank screen. Lens comes out but nothing works. Cant take pictures. E16 message in lower left corner when you turn camera off.


The E16 error is a motherboard issue. Needs to be sent back to Canon as I assume it is a canon because they generally get an E16. If it is a different brand, let me know. Otherwise sorry for the bad news, it may be the time to just get a new camera e ... Digital Cameras

When ever I try to use the zoom button I get a message saying system error (zoom) I have also gotten a message that says Please turn off camera and turn on again... What is going on with my camera and what needs to happen to get it fixed!


When you first switch on the camera the lens will motor forward?\015\012\015\012If it does so then either the zoom control button is faulty or the control pcb \015\012\015\012If the lens does not move on first switch on then i ... Panasonic Lumix DMC-FZ28 Digital Camera

My lens is stuck open and all the way out after zooming on a cold evening. The camera turns on, lights up showing G( window and then beeps and goes dark saying 'lens error, restart camera' at


If any amount of moisture has entered the camera this will not be a user fix, it will require service. ... Canon PowerShot G9 Digital Camera

I dropped my panasonic camera onto the zoom lens. the zoom will not close, the shutter stays open. When I turn on the camera it says "please turn off camera and turn on again." When I do this the same message comes on again. Is it worth geting fixed?


... Digital Cameras

I have a Olympus C-750 Ultra zoom camera and I suddenly the camera stopped working one day. Now when I turn on the camera it says format memory card, but then when you select yes the camera shuts off and when I turn it on again it says photo chard error and shuts off again. What is wrong with the camera and what can do to remedy this? Will replacing the photo card help?


The memory card may be defective, try another, if that cures the problem great, if u get the same message then the camera has failed and you will need to send it in for repair to a Kodak service center, there is nothing u can do to fix this, Kodak do ... Digital Cameras

Camera problem Hi. I have a Pentax Optio M20 Digital Camera. When I hit the on/off button, the camera turns on, the lens zooms out for a second and then back in, then it shows the "Pentax Optio M" load screen, then it shows "Auto Picture" in the center and a green dot in the bottom left with the words "EV Compensation" next to the dot. While it's showing this last screen, it beeps 3 times right before the lens zooms out again then back in just before the camera turns off. I have changed the batt


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera

Zoom Error? Whenever I turn my camera on it says "Zoom error". It won't let me zoom. The image is incredibly blurry. And even when I turn the camera off the lens doesn't shut all the way. I tried resetting it, but it had no effect.


Dirt in the focus motor drive gears right behind the lens at the front.\015\012It's a **** design (my opinion). The lens at the front moves in and out depending on your zoom level. It can come right out of the lens barrell at the front. So, if ... Fuji FinePix A500 Digital Camera

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

The entire zoom lens will not come out when I turn the camera on. It moves a little, makes a sound, and then my camera says turn off camera off and back on. I tried that several times and it is still not working. The battery is charged. I did go to the beach and wondering if sand got into the camera. I also cannot review my pictures as the message comes up about turning it off. What is the best solution?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Panasonic Lumix DMC-TZ3 Digital Camera

When I turn my camera on I get a "zoom error" in red that appears on the display. Then the camera shuts off, and the optical zoom is left extended out from the camera. The camera is a Samsung Digimax 530/ 5100 model, 5 megapixel, 12X zoom, 3X optical.


Your camera has a lens error ... Samsung Digimax 530 Digital Camera

About a week ago I turned on my Lumix TZ5 and in the screen displayed this message: "please turn camera off and then on again. I have taken the battery off and I have charged, but the message still displays. When I turn the camera on, the lens extends to the maximum but when I try to use the zoom the camera doesn?t respond. Then if I turn it off the lens stays out. Any idea? Thanks in advance. P.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Panasonic DMC-TZ5 Digital Camera

Just purchased an powershot SX1 IS. I took one photo, zoomed in on it to see how clear the zoom was once taken a photo. THen it switched itself of with the lens still out. Now when turning it on it has a black screen and say lens error...restart camera. I have tried holding func. when turning on the camera and the time comes up on the screen. But as soon as I let go of func I get the error msg.


Hello if you just purchased this unit Then i advise you to take it back, this sounds like a system control issue or main board problem. Holding the function key while turning is factory reset, if this is not working right them the camera has a bad sy ... Canon PowerShot SX1 IS Digital Camera

My camera's optical zoom isnt working. when i was on holiday little bits of sand got stuck in the zoom lens and now it wont come out and isnt allowing me to take pictures. the camera turns on, but comes up with a message saying "turn power off then on again."


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sony Cyber-Shot DSC-S40 Digital Camera

My sony cyber shot camera does not work it turn on but the screen is black and it says turn on and off again but whenever i do its the says the same thing. However i can view pass pictures on my camera but i cant take any new ones. I need help


HelloThank you for using FixYa for your problemAlways check the batteries first but if is it still giving the same fault, your camera is faulty. It should be taken to an authorized repair centre for a repair ... Sony Cyber-shot DSC-W55 Digital Camera

I turn my camera on and it says protected card across the screen. I cant take pictures but I can look at them. I take out the card and turn the camera on and it either says memory full or just completely shuts off


SD cards have a little slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully ... Sanyo VPC-S1080 Digital Camera

Frame error Turn on and take photo and then a message comes up saying "frame error" and then Even shutting the camera off. When turning it back on it still says "frame error" . When you take several photos you only end up with a very few on the memory card. What is the problem and how can i fix it? I cant view any of the photos. I replace camera with a new battery. Could it be my SMART CARD. Need help! Fuji MX-2900


... Fuji MX-2900 Zoom Digital Camera

My kodak easyshare MD853 digital 8.2 camera has some problems.. When I turn it on it says: lens error message 122,1,0,0 and the zoom will not retract back into the turn off position.. I called Kodak & it's still under warranty however they say if it's something that not under warranty they will charge me anyway... I bought insurance through Target as well & they referred me to kodak. Does anyone have any suggestions on how to fix my camera?


My camera i dropped it and it was off and i waiting a few minutes and then picked it up and tried to turn for a photoshoot and the dum camera wont work now it says a lens error and it wont come up or anything, so i dont know what i should do ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5422 seconds