Having problems with your Panasonic Lumix DMC-FS5 Digital Camera ?

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.


Answers :

Hi,

I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!!
This message appears when force has been applied to the lens. You will probably need service.
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FS5 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.


Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

Faulty d40x hi i bought a d40x off ebay the other day and couldnt wait to start snapping.... problems: - The error message "initialization error. Turn camera on and off again" appears. Upon turning the camera off and on again, the same message appears. After several times trying it still does not work. Also, the menu screen appears, and just keeps flicking from menu to menu constantly. As well as this, on the playback mode, the picture of the image displayed keeps zooming in as far as


I would start by looking at all of the push buttons on the camera. One may be stuck down. ... Nikon D40x Digital Camera

Hi, I own a Sony Cybershot camera, and it has been giving a few problems as of this week. The lens keep re-adjusting in and out when I turn the camera on to take pictures. It however responds just fine when in picture-view mode. There is a screen prompt that says 'Access' when the camera is turned on, as well as the message 'turn off camera and start again'. I do not think that the camera had fallen at any time, and it is just under a year old. Thanks a lot for your response, Sarah.


... Digital Cameras

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?


Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

I have a Kodak Easyshare model dx5430 digital camera (5mp). It has worked like a champ for years. Last night I was at an event when the image display went dark at picture 31. All preceding photos were able to be reviewed. The camera flash works fine. The camera displays all the other characteristics of a working unit. It turns on and off; the flash works, the menu is accessible - everything. It just doesn't register any photos. Even in close-up mode, there is nothing. It's as if the lens cap is


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot A75 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

When I turn on my camera in camera mode, it says memory full. I go to the middle selection to delete some photos and the camera freezes. It won't go to menu, it won't go back to camera mode or video mode. It just freezes. I can't even turn it off unless I take out the batteries. It is a Concord 4363Z model. I think it has a reset button but I am not sure how to use it. I can't find my manual for this camera. Thanks.


Go online and google search for \015\012\015\012Concord Camera Eye-Q 4363z Digital Camera owner's manual. You should be able to download a copy fro ... Concord Camera Eye-Q 4363z Digital Camera

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho


I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera

Cybershot dsc-w100 well actually my camera is a cybershot dsc-w100 and when i push the on button it says access but after that it goes to a mode where it says turn the power on and off again and i turn it off but still does not work. as i do this the lens goes in and out like three times and when the camera is off the lens stays out


If you cannot find a solution to your problem you may want to email [email protected] He has good advice and good used parts at a fair price. ... Sony Cyber-Shot DSC-S40 Digital Camera

When I put my gopro camera to F default mode in order to have video mode come on when I turn the camera on, for an instant it will be in video mode but then automatically switches to 10 second timer mode? Also I was shooting some ice climbing and the camera stopped filming in every occasion on its own after about a minute or so even thoug I have set it on "OFF" for manual turn off- could it be because temperatures were -12celcius even though I have a lithium battery? Finally I have files from 1-


What card are you using? They are particular to which cards they will work with. ... GoPro Motorsports Hero GMHW50 Digital Camera

My sony cyber-shot dsc-w55 7.2 mega pixel camera turn on but the lens goes in and out many times and i get the word access on the screen then i get a message says turn the power off and on again, I did that many times , but it did not work, and I can't get the menu button to work or display any thing, so I am wondering what is the problem and how to fix it?


... Kodak EasyShare CX6200 Digital Camera

Fuji finepix a400 camera. When I power it on I get the 'date/time not set message'. I can set the date / time and all in well until it is turned off overnight. It has new batteries installed and I get this message even with an external power supply attached. This is most annoying.


I would suggest going to the fuji website to download the latest firmware driver and update the firmware on the camera. ... Digital Cameras

We have a Fuji Finepix F420 that has had no accidents or falls. Suddenly it will only work in Play mode. In camera or videocamera mode it won't do anything, we can't even press the menu button or turn it off. I have emptied the memory card and fully charged the battery.


... Fuji FinePix F420 Digital Camera

Canon SD400 I dropped my SD400 and it will turn on, but the shutter will not retract. However, the screen comes on in color and then goes black and says no image. I can access the menu screen while on the picture taking mode. If I move to anything else the camera beeps three times and turns off. What should I do? Can it be fixed? Should I take it somewhere to get it fixed... and where can I take it?


Its very eas to fix this one.. \015\012\015\012just use a small screw driver and open it up.. \015\012\015\012its possible that the gears were just misaligned. \015\012\015\012got mine fixed..  ... Canon PowerShot SD400 / IXUS 50 Digital Camera

It is possible to turn off the LCD backlight from the menu, but when the camera is turned off it defaults to the LCD backlight on, and the card access light continues to flash, and the battery drains


... Nikon D90 Digital Camera with 18-200mm lens

Ok so i am turning on my camera (an Fe-340) and the lens go in two or three times then when the screen finally does come on it is blurry and way out of focus, also when i attempt to adjust the zoom the camera turns itself off, if i attempt to turn the camera off using the power button it goes off but the lens does not retract.All other functions on the camera are operating correctly to my knowledge i can even take a blurry out of focus picture, view it in display mode or even transfer it to my c


It may be something more serious, but the problem you describe is\015\012frequently due to corrosion on the battery contacts inside the camera. \015\012Remove the batteries and wipe the camera contacts firmly with a clean\015\012cloth (heavy corrosio ... Olympus FE-340 Digital Camera

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do


The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera

What does change the batteries message indicate when new batteries are installed? Canon S2 IS will not turn on in camera mode but reads "change the batteries" even with new batteries.


Are you still using alkaline batteries? If so, alkaline batteries just don't have the power for more than a few pictures in a digital camera. Some may also have reached their shelf life at the store, and though right out of the package may even have ... Canon PowerShot S2 IS Digital Camera

My camera was dropped accidentally while capturing a image. After that i switched off and when I switched on for next snap, display shows access and after few seconds a message appears saying" Turn the power off and on again" I did this several times but no effect and even i removed the battery and inserted back still no use. Please help.


I am a technician who repair any electronic devices, i repair digi cam a few hours ago, foreign object or dust is not the cause of that error, digi cam has 3 lenses, 1 is outside lens, 2 is is the swinging lens and 3 is the retractable lens,... do no ... Sony Cyber-shot DSC-W55 Digital Camera

My D90 sometimes has an err message and also a CHA in the the ISO mode. Also there is a green LED on the back of the camera that stays on. The only way to get all this cleared is a battery pull. When this happens it wont take a picture, you cant access the menu or anything.


CHA indicates a problem with the SD card. ERR indicates a camera malfunction. Try reformatting the card which may clear the problem or try a different card. The card may be creating the ERR message. On page 259 of the D-90 users manual, Nikon says th ... Nikon D90 Digital Camera with 18-105mm lens

I have had this camera about 2 years and now suddenly when I turn it on in any of the 3 modes it will only give me a "clock set" menu on the touch screen. No matter what I try it stays on that screen. And doesn't even allow me to se the clock! Seems stuck. Any ideas? Does it need to be sent in for repair, or is it worth it? Thanks, Curt Mathisen


Hi,I need model number and brand info of your camera to diagnose problem.Thanks. ... Digital Cameras

Access problem When I turn the camera on, all I get is the message "access" followed by another message to "turn off and on again". When I turn off and on as it said, all it does is recycling the same messages again and again and again..


... Sony Cyber-shot DSC-W55 Digital Camera

I can only turn on my Cybershot DSC-N2 while the camera is in playback mode. I can look at the pictures and videos and change settings with no problem.. but when I try to switch to camera or video record mode the camera turns off by itself. Sometimes the lens will come out and then the camera powers down with the lens stuck out. Other times it just shuts off before the lens even has a chance to come out. The camera has never been dropped or damaged.


First press power button for 15 seconds .Then remove memory card from it may be your memory card has some issue.also press reeset button on camera some camera has reset button.start your camera without memory card. ... Digital Cameras

I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"


Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5794 seconds