Having problems with your Panasonic Lumix DMC-FS5 Digital Camera ?

My Panasonic Lumix FS5 tells me to turn off camera and turn on again and keeps repeating this. the lens will not close - I have charged up batteries. This seemed to immediately follow me zooming in to photograph. The lens does move slightly backwards and forwards when I switch camera back on then remains firmly stuck fully out. Please can you help. Thanks


Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FS5 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Panasonic Lumix FS5 tells me to turn off camera and turn on again and keeps repeating this. the lens will not close - I have charged up batteries. This seemed to immediately follow me zooming in to photograph. The lens does move slightly backwards and forwards when I switch camera back on then remains firmly stuck fully out. Please can you help. Thanks


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic Lumix DMC-FS5 Digital Camera

I have a D5000 camera w/ kit lens VR 55-200, less than a year old. Recently and only occasionally what is happening is when I press the shutter release button, the lens won't focus, it won't move in or out and it makes a odd noise, not the usual lens motor noise, but an odd squeaking noise, like it's trying to move but is stuck. The only way to correct it is to either shut the camera off and turn it back on again, or switch to manual focus, then back to auto. The battery is full, so it's not


Your camera is still under the one year Nikon warranty. Call Nikon's repair depot at 1-800-NIKON-US (1-800-645-6687) 9AM-8PM EST, Monday to Friday. They will verify your warranty and assist you in returning it for repair. ... Nikon D5000 Digital Camera

When you turn the camera on the lens goes back and forwards and eventually stays shut the cameras screen says switch off and turn on again


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-shot DSC-W200 Digital Camera

Kodak C875 digital camera - when turned on sometimes the lens moves out about 1/4 inch, camera clicks and lens moves back in and camera turns off. Also there is some clicking when the camera is turned off. How serious is this?


Remove the batteries and clean the battery contacts inside the camera\015\012with a soft cloth (a heavy buildup on the contacts may require cleaning\015\012with a fine wire brush, steel wool, or sandpaper). Remove any residue\015\012that the cleanin ... Kodak EasyShare C875 Digital Camera

I have a Canon Powershot S3 IS and I was looking at picture I had taken and the lens was retracted. I switched to the camera mode and the lens started to come out and hit my leg and stopped half way. The lens went dark. I turned it off to retract the lens and then turned it back on. The lens came all the way out but the screen is still black and I could feel the camera and just barely hear it making the noise it makes when the lens is coming out but it was already all the way out. I switche


Format ur memory card ....and replace the cells.....might work...contact the customer care for help ..they mightr be able to fix it ... ... Digital Cameras

On/Off Switch Hi My problem with the 5050Z is as follows; When I switch the camera on the lens extends and then retracts but not always. This can carry on until I turn it off. On the odd occasion that this does not happen, should I lightly touch the on/off switch (but not move it) the lens begins to retract and extend again until I turn it off. Has anyone experienced this problem, if so, is there a solution? I've tried removing the batteries for 24 hours to force the camera to fully res


I too have experienced the same situation .... I have THREE C-5050's and "REGULAR" part seems to occure when the camera is overworked, or WARM. Does your camera become warmer is you are shooting many picturees one after the other? When it cools down ... Olympus Camedia C-5050 Zoom Digital Camera

When i switch my digital camera(Sony Cyber-shot DSC-W90)on,my objective moves forward and back(4 times),it stated then on my screen:"Turn the power off than on again". I've done so over time,but nothing happened. So i can't do the main things,which are making photos and videos,but,at the same time, other options are available. I tried to change some options,but nothing happened. Please,help me...


This Is Gonna Sound Nuts But Ive Looked It Up And They Say It Works %99 Of The Time1. turn off the camera and hold the camera on the edges2. you will smack, or pack on Every side Except the\015\012side that has buttons. care ... Digital Cameras

Dear sir, I am an Indian Air Force officer in possession of Lumix DMC FZ-20 camera for last 4 yrs.and has provided excellent performance till now. A month back, something happened and the lens assembly became free.On switching on the lens would move out but would fall back on its own, and after 3 tries, message to switch off/on again would appear. I gave the camera to Vashist Electronics, New Delhi, authorised service centre, vide job card no. 10GVEO666 dt. 22 Jul 2010, but


Hi,This sounds like the zoom mechanism has broken. These are not made of plastic but rather steel or aluminium.You could send the camera to an international repair centre like the UK for example. Click on the link below for de ... Panasonic Lumix DMC-FZ20 Digital Camera

When the camera is turned on the barrel moves out. When I use the optical zoom the inside lens moves but not the barrel. When the camera is turned off, the barrel moves back into the camera.


What is the model # please??Thanks!! ... Konica Minolta DiMAGE Z6 Digital Camera

Sometimes the autofocus doesn't work. It is switched to af. When I turn the camera on it will normally focus but after 1 or a couple of pictures it will not autofocus. If I move the switch to Manual I can take the picture and then if I move the switch back to m/a it will focus and keep focusing and I can take a few few more frames then then the auto cocus stops working again and I have to switch back to M and so on. I never know when it wount work. Thank you.


Having received no response in over a month, I assume this is no longer a problem. ... Nikon D70s Digital Camera

I swapped memory cards with my daughter as mine had a bigger memory. However it didn't seem to work properly in her camera. Her camera now freezes on the opening screen when its switched on and does nothing else, the lens also refuses to go back in. I put the card back in my camera and now mine just switches off when you turn it on after making 3 blip noises! Now both cameras don't work with or without the memory card. I've checked the manual for mine which has no explainations. Also checked bat


The first mistake happened when your card was tried in your daughter's camera. She should have immediately formatted it first since the card was optimized for your camera's operating system. Since she didn't do that and tried to use it in her camera, ... Agfa DC-1030S Digital Camera

We have a Sony Cybershot DSC-W1. When we turn the camera on it fails to start properly. The lens moves a little, it beeps 18 times and then displays "Turn the power off and on again". We have tried changing the batteries, but it has made no difference. When we turn it off it moves the lens, but does not bring it fully back. Any tips appreciated.


Goto http://www.digitalcamrepair.com/self_diagnosis_page.htmfor self diagnosis.please let me help you before leaving a bad feed back. ... Digital Cameras

When camera turns on, it makes a buzzing noise as lens moves out and then moves back in again, and then camera turns off turns off--no functions available during this period. cannot view or take pictures, new card and battery is fully charged. can this be fixed? others have had same problem but no answer for it on this page: http://www.fixya.com/support/t228714-turns_lens_comes_out_turns_off


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Pentax Optio T10 Digital Camera

The entire zoom lens will not come out when I turn the camera on. It moves a little, makes a sound, and then my camera says turn off camera off and back on. I tried that several times and it is still not working. The battery is charged. I did go to the beach and wondering if sand got into the camera. I also cannot review my pictures as the message comes up about turning it off. What is the best solution?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Panasonic Lumix DMC-TZ3 Digital Camera

Lens Error My cameras battery was low but I kept taking pictures until the camera shut off by itself. The lens didn't retract all the way and now when I try to turn my camera on it makes a clicking noise like the lens wants to move but it doesn't and on the back screen it states a lens error. I am not sure how to resolve this problem I have charged the battery and taken it out. I unfortunately do not have the manual on me.


I have exactly the same problem with my camera, except there is no error message - just the screen is off (bat is full). i cant find a soultion anywhere in the manual or online. Any help on this would be much appreciated. ... Casio Exilim EX-S500 Digital Camera

I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f


Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera

Hi, may camera has a problem,when i turn on camera moves in and out.afterwarsd the words turn the power off and on again are displapyed. i have already forwarded my concern to sony service center and told me i should leave may cam for 3 days. and inform me that maybe the problem is the lens and that maybe i should buy another lens for my cam.


NO, the problem is in the lens motor that drives the lens, the service center agents will get it done for you & yes it does take a bit of time there. u don't need to change your lens. ... Sony Cyber-shot DSC-W70 Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work. hi expert i m suffring in this error on my panasonic DMC-LC33 when i switched on


Try \015\012\015\012Klomtrix trick this worked with my camera\015\012thanks klomtrix ... Panasonic Lumix DMC-LC33 Digital Camera

IR-300 Olympus My camera lens is stuck open. When i turn on my camera it makes noises like it is trying to move the lens/shutter but it doesn't move and then the screen will say ZOOM ERROR and turn back off. Can anyone help?


I had what sounds like the same problem. The camera was dropped and the shutter was stuck open. Just kept showing error message.\015\012As I felt I had nothing to lose I began tapping it on a soft book and the shutter started to appear. I then ... Olympus i:robe IR-300 Digital Camera

When camera gets turned on, the lens goes in and out of focus a few times and then screen turns blue and displays "D : 5f08 5e02" and does not go back to shooting pictures again. But for just looking at the pictures on the memory card, it works if turned on in that mode. If turned on in photo-shooting modes, it cannot be switched back to view photos. (OLYMPUS M700)


It's a sensor issue. The error indicates there is a problem on the lens.It may be caused by sand, broken gears or any other foreign object in the lens mechanism.A simple fix is to turn ON camera while holding it with\015\012the len ... Digital Cameras

I have a sony cybershot wsc 1000 which when the camera is turned off the lens will not go back in.When turned on again the screen says Acess and then "turn the power off and on again" when i do this nothing happens and when switched on again it is exactly the same .the camera will not take pictures or show anything on the screen .It will playback old pictures.Any Clues?


Lens mechanism of your camera isn't working and you need to contact nearest Sony repair shop to fix camera properly. ... Digital Cameras

The camera will not turn on after being dropped. When I switch it from off to on, the green power LED flashes briefly. The lens does not move or attempt to extend. The LCD backlight does not illuminate. The LCD appears to be slightly damaged: there is some slight non-uniformity visible when I shine a strong light on it. Otherwise the camera shows no sign of damage. Is it possible that the damaged LCD is preventing the camera from turning on? Is there a hard reset procedure I should try? I've t


I have the same problem. Can someone advice ... Panasonic Lumix DMC-ZS3 Digital Camera

Lens stuck My Sony Cybershot lens is stuck in the out position. It occured when I went to take a photo, the camera turned on and then the battery went dead; not enough juice to turn it off. It was frozen like that for about a day and a half, I did not have access to an outlet. Once I charged the battery, it not struggles to move but is stuck. The LCD display says, "turn power of and then back on" Is there a trick to un freezing it? I don't want to send it in for repairs, my warrenty is exp


Hello, I have read other forums that suggest that quite literally rapping or swatting the unit on its bottom half can actually solve the problem and get things going again. I am going to try it with mine. I too have a stuck lens. Here is a link that ... Sony Cybershot S650 Digital Camera

Zoom my camera isnt an olympus FE - 230 digital camera, its a kodak M836, i can look at my pictures okay, but i cant take any, as when i turn it on to take a picture the lens goes out, and then back it and it switches off. it is nothing to do with the battery as i have charged it several times. - my dad thinks that it goes back in because there is some sand inside (as we recently went on a beach holiday) and that the sand is stopping the zoom from coming out all the way, so it goes back in, alth


TIPS:1.)NEVER PUSH THE LENS IN AFTER CAMERA DIES, BUY A NEW BATTERY IMMEDIATLY AND TURN IT BACK ON, CLOSING THE LENS!2.)NEVER USE AN AC ADAPTER, USE A RECHARGEABLE BATTERY OR A REGULAR BATTERY!..to fix this... ... Olympus FE-230 Digital Camera

My Nikon Coolpix S203 has a "lens error". Every time I turn on the camera, then lens goes crazy, moving in and out and zooming in and out of focus, all the while making a beeping noise. It then retracts back into the camera and the message "Lens error." appears on the screen. Please, is there anything I can do to fix this? Thank you.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Nikon Coolpix S203 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4629 seconds