Having problems with your Panasonic Lumix DMC-FS5 Digital Camera ?

The camera turns on finebut as soon as the lens comes out it automatically goes back in and repeats this for 2 to 3x before the screen goes white and it say "please turn camera off and then on again"


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FS5 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The camera turns on finebut as soon as the lens comes out it automatically goes back in and repeats this for 2 to 3x before the screen goes white and it say "please turn camera off and then on again"


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FS5 Digital Camera

When camera is turned on, screen goes white with comment "please turn camera off adn then on again", lens won't retract or will retract, but opens up again after camera turned off...


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic Lumix DMC-LS80 Digital Camera

Lens Error! We have a Nikon Coolpix S6. When attempting to turn on, the camera buzzes. Afterward, the screen shows what the lens is pointing at, but then it goes white and the words, "Lens Error" appears. I can't find the manual to pinpoint the problem. Also, when the camera is turned off, the lens cover stays open, and only goes back when the bateries are taken out and put back in. Please help quickly, this is a school camera, and it is needed for a large scale progect. (yearbook). We h


I know this is really late, but I've been having the same problem with the S6 on and off for the whole year, and I suspected a loose part.\015\012\015\012For a whole week, I couldn't turn on my camera, and the lens cap doesn't close until five minute ... Nikon COOLPIX S6 Digital Camera

E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18


E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash ... Canon PowerShot A400 Digital Camera

When i turn my camera on it goes to a white screen and says lens error 111,0,0,0 then turns to black screen and says lens error 221,0,0,0...wuts wrong? i have a kodak easyshare c813, 8.2 mega pixels, 3x optical zoom if that helps at all


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Kodak Easyshare C813 Digital Camera

With our panasonic DMC-LZ5, first we got a message saying replace batteries, which we did (with new ones). Now, the screen is all white with a message saying please turn camera off and then on again. We've tried several sets of batteries, and turned it off and on again. The picture of the battery is all in white, with a line through the middle. Any ideas on how to reset?


Http://www.fixya.com/support/t1100571-lumix_dmc_lz5_replace_battery ... Panasonic Digital Cameras

Hello i have a Sony DSLR A700 that ive owned for a short time.. i dont know much about it but im learning.. just recently tho when i turn on the camera.. take the lense off and get ready to take photos in my viewer the screen goes white and it tells me to reinsert my CF card. ive done so several times. ive also noticed when i look into the camera at the bottom of the screen it says caRd and on the right side an E is blinking.. what is wrong with my camera and how can i fix this... thank you


... Sony Alpha DSLR-A700 Camera - Digital Camera

Help! My camera is doing the same thing other's do too. I turn it on and it says "Turn power off and on again" and the lens comes out and goes back in halfway. sometimes I hold down the play button for about 5 secodns and then press it again and it allows me to take (bad) pictures. When i say bad pictures I mean the screen starts shaking and gets static or something and then when i finally can take a picture they exposure comes out so bright that the picture is just a all white or it comes out t


Hi try turning on and taking hold of the end of the lense and gently pulling and twisting you may hear a click but dont force it. then turn off and on again. then you may want to try\015\012\015\012\015\012Press Menu button to ... Sony Cyber-shot DSC-W55 Digital Camera

Camera frozen I have recharged the battery and have changed charged batteries several times, howeverer when I turn the camjer on nothing happens(the lens is and remains extended ) but a red light blinks for a short while then goes off. The first few times that I tried to turn the camera on there was an error messafe on the screen saying error and a number but I don't remember what it was. Please can yoy help?


Try removing the memory card first then turn it on ...see what happensthe problem maybe with your card and not with the camera ... Kodak EasyShare C360 Digital Camera

I have a new memory card for my kodak easyshare cx6330 camera.when I turn the camera on the message on the screen says memory card requires formatting. when I attempt to format it it says formatting for several seconds and then goes back to screen to continue or cancel. I cannot find my manuel to follow the directions. Can you please help me?


The CX6330 works with MMC and SD cards. If your new memory card is larger than 2GB then it's actually an SDHC card and will not work in the CX6330.You can view/download the manual at the manufacturer's web site athttp://support.en.k ... Kodak Digital Cameras

Hi there, I have panasonic lumix fx12, the camera was working fine till suddenly i saw this msg "please turn off the camera and turn it on again" when i turn it off the lens does not goes in and when i turn it on the lens goes it and comes out again but as soon as i press the capture button again the same msg appears on the screen and again the same story, I can hear a little noise from the lens for a few sec too! Could any body help me on this please!!!!!!!


Some say that this could be because the lens is out of alignment. See here: http://www.digitalcamera-hq.com/products/panasonic-lumix-fx12?dj=1&ratings=1 ... Panasonic Lumix DMC-FX12 Digital Camera

I dropped my camera on the floor while i was taking a picture , the camera shut off , but the lens stayed popped out . i tried to turn the camera on again , but i would only show me the home screen , which says "Kodak Easy Share System , Share" then the camera freexes up , and it say in the top left corner , "lens error : 22" i've tried smacking it against things , i've tried smacking it on my hands , i've tried pulling out the lens , NOTHING WORKS. Please Please Please Please Please Please Plea


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Kodak EasyShare CD33 Digital Camera

Troubleshooting problems I have a canon powershot s60. I tried to take a picture earlier and the screen is completely white. The camera turns on, the battery is fully charged and there is nothing wrong with the digital card. THe camera wasn't dropped nor did it get wet. I keep trying to turn it off and on, but all I get is a white screen. No images. But there are 900 images on the camera card and i just used it this morning. Please help. Thanks, Shannon


Take a picture with the camera and download it. If the pictures also shows up white then this probably is a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's w ... Canon PowerShot S60 Digital Camera

The camera says please turn camera off and then on again every time i turn it on I dropped my camera and now when I turn it on the lens goes back and forth and the display reads "Please turn camera off and then on again"


Hi,\015\012I too have the sam problem but was able to solve it. I called the 1-800-number and was told that this is a very common issue or this camera. They told me to tap the lens when it was extended on a cloth or ... Panasonic Lumix DMC-TZ3 Digital Camera

Okay, first off i have a sony-cybershot dsc-W80 and one day i brang it to the park and dropped in the sand accidentaly. Now whenever i turn it on, it says cyber-shot on the screen and the lens goes out and in about 4 times, then on the screen it say please turn power off and on again, and it keeps doing the same thing over and over again. please help!


These are always lens error messages-the lens is stuck or off track and camera will need to be serviced ... Digital Cameras

Camera Everytime I turn my camera on it comes on, but the lens goes in and out a few times before the screen goes completaly black and says to turn the camera off then back on again, I do, and the same thing happens all over again, not allowing me to take any pictures. However, I can still view the pictures that have been taken...and that are on my memory card.


It a lens misalignment try tapping the lens gently in an opposite direction the camera dropped on and that should pop the gear back into place ... Sony Cyber-shot DSC-W70 Digital Camera

White screen one day, i turned my camera on, and the screen was completely white. with a few shakes, the picture came back, but now it goes in and out, from white to the camera. did i screw something inside it up? how do i fix it?


Sounds like the LCD's ribbon cable is not securely attached to its connector. If the camera's no longer under warranty, you'll need to open the camera, remove and then reseat the LCD ribbon cable into its connector. If you decide to attempt repair, ... Canon PowerShot A570 IS Digital Camera

My sony digital camera won't fully turn on. when you push power the screen stays black but it says access and the lenses repetitively goes in and out with a 3 second pause between. then finally it stops and says to turn the camera off then back one. but this keeps occuring and it won't fully turn on. HELP!


There is some problem with your sensor in lens so only you are getting this problem .......so better check the sensor..... ... Digital Cameras

Olympus DE-510 Zoom When I turn camera on, the screen has a red T at the top, with a box saying Yes, and one saying No. The line at the bottom says Go>OK. If I click OK, I get the same screen again. If I click Yes, I get a Card Error message. I cannot take a photo. I am on a cross country trip, and don't have my manual, but I sure would like to be able to take pictures of the Rockies! I know the camera is old, but I love it. Please help me to get it working again. Thanks, Toni Sinclair


I tried to find more information on the zoom error, and couldn't find much, but I did find a free manual, which might help:\015\012 ... Olympus Camedia D-510 Zoom Digital Camera

We have a Panasonic DMC ZS3 camera that has been working fine until now. We are on the North West coast of Costa Rica. When you turn the camera on, the lens, which was out when shut off, goes in, then comes back out. The camera screen tries to focus, then goes to a blank screen and says "SYSTEM ERROR (FOCUS). When you shut it off, the lens does not retract.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-ZS3 Digital Camera

Dropped camera I dropped my camera very lightly now the lens are stuck. Is there any way to fix this without going to a repair? I just got this one week ago and the drop was so light. THe screen works it says Access though and then it says turn the camera on  & off i did this but it still doesn't help. But the menu screen & etc works. Please help, thanks!


Check this out\015\012\015\012http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Sony Cyber-shot DSC-W55 Digital Camera

Lumix DMC-F3 When I turn the camera on, the display screen says "PLEASE TURN CAMERA OFF AND THEN ON AGAIN" when you do it, it says it again???


There is a problem with your camera Lens Assembly. It is not opening within stipulated time. The lens assy is jammed or damaged. Take it to service center. ... Panasonic Lumix DMC-LZ2 Digital Camera

The camera says. please set date and time and after i press ok. the screen will show, initialization error, please turn off camera and turn on again. what solutions should i make? thanks a lot!


Hey, I am having the same problem with mine! I asked the same question on here with no response. I have recharged the battery, reset the camera, and everything but i don't know what to do...do you ever figure anything out? let me know: [email protected] ... Nikon D40 Digital Camera with G-II 18-55mm Lens

My sony cyber-shot 7.2 mega pixels digital camera is NOT working. When i turn it on, it says acess, then the lense comes out and goes back in over and over. After doning that about four times it says "Please turn camera off and then back on again" However when i do this, it just repeats itself. Any idea of what i should do?


... Sony Cyber-Shot DSC-S40 Digital Camera

Sony-cyber-shot dsc-w50 I blieve that the battery if fully charged however when I turn the camera on all i see is a blank screen saying "access" with the lense zooming in and out then a message comes up on the sceen saying "turn camera on and off" I do this and the same thing keeps happening, could you please help? Sara


Lens unit is faulty, may have had sand or damage at some time, focus assembly inside the lens is not focussing ... Sony Cyber-Shot DSC-S40 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4405 seconds