Having problems with your Panasonic Lumix DMC-FX30 Digital Camera ?

Hi ! My Panasonic DMC-FX30 won't close when I turn it off.. It's like it's jammed open.... and it says please turn off and on again when I switch it on... what shall I do? Love Rosie


Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
My camar did the same thing so i letf the lens out and i trun it on and off while i was slaping the lens on my palm for a cuple of time and it work
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FX30 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi ! My Panasonic DMC-FX30 won't close when I turn it off.. It's like it's jammed open.... and it says please turn off and on again when I switch it on... what shall I do? Love Rosie


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic Lumix DMC-FX30 Digital Camera

Hallo, when I switch on it says "please turn


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic DMC-FX37 Digital Camera

Olympus DE-510 Zoom When I turn camera on, the screen has a red T at the top, with a box saying Yes, and one saying No. The line at the bottom says Go>OK. If I click OK, I get the same screen again. If I click Yes, I get a Card Error message. I cannot take a photo. I am on a cross country trip, and don't have my manual, but I sure would like to be able to take pictures of the Rockies! I know the camera is old, but I love it. Please help me to get it working again. Thanks, Toni Sinclair


I tried to find more information on the zoom error, and couldn't find much, but I did find a free manual, which might help:\015\012 ... Olympus Camedia D-510 Zoom Digital Camera

I have a sanyo vpcs1070, i currently have a 8 mb memory card in it. when i turn on the camera it says there are alot more pictures on my memory card than the camera will let me view. the sd card display in the corner says i have 797 pictures and when i go to the option to view my pictures the picture number display says 737..i am missing 60 pictures that i would love to view because they were of an awesome concert. can you help me please figure out how i can view the "missing" pictures???


Hi,Pictures read and write in series in memory card if its inside camera so if one picture file got corrupted for some reason, camera wont show next picture and will stuck there.Take out memory card from camera, plug it to in memory card ... Sanyo Vpc-s1070w Digital Camera

I have a Canon Power Shot SD790Is DIGITAL ELPH and the camera keeps saying card error, card locked. I am aware there is a switch on the side of the card, and it is currently unlocked. When I turn the camera on however, it still says there is an error and that it is locked! Please help! Thanks.


HelloOk, here is something you can try:In your case the \015\012problem is not with the card but rather with your\015\012camera's card reader. This is a rather hard problem to fix yourself but\015\012here is what you can do. ... Digital Cameras

My camera was dropped accidentally while capturing a image. After that i switched off and when I switched on for next snap, display shows access and after few seconds a message appears saying" Turn the power off and on again" I did this several times but no effect and even i removed the battery and inserted back still no use. Please help.


I am a technician who repair any electronic devices, i repair digi cam a few hours ago, foreign object or dust is not the cause of that error, digi cam has 3 lenses, 1 is outside lens, 2 is is the swinging lens and 3 is the retractable lens,... do no ... Sony Cyber-shot DSC-W55 Digital Camera

When the camra is switched on, the picture in the viewfinder first goes blurred with lines appearing then gradually goes out of focus altogether turning purple. If you try to take a picture it says 'Write Error' please check the card?


... Panasonic Lumix DMC-TZ2 Digital Camera

A message comes on the screen saying please turn camera off then on again. The camera has to be switched off and on it then works for another 15 - 20 seconds.


The message appears when force has been applied to the lens such as the lens trying to extend while in a case or a pocket. ... Panasonic Lumix DMC-TZ1 Digital Camera

I have a Sony Cybershot DSC-W120 digital camera. The problem I am having is in regards to the lens going in and out whenever I switch on the device. The an error message appears on the screen saying "Turn the power off and on again". Should I take apart the camera? Please assist, thank you.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Digital Cameras

Ive been having problems with my sanyo vpc s1070, everytime i turn it on it says lens error. i got it for christmas in 2008 and not even a couple months later it started doing this.it has nothing to do with the batteries, i love this camera and i dont want to get a new one.sadly i have no money to get it fixed professionally. but if it comes to it i will. how do i fix it. im alrady in the process of being a techno nerd and tearing it apart carefully. please help


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sanyo Vpc-s1070w Digital Camera

When I switch the camera on it wont focus and the screen says please turn off and on again and the lense seems to struggle to move!!


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Digital Cameras

Hi when i turn my camera on it makes a sound like the lens is trying to retract to the face of the camera.Then on the display it says please switch camera on and off i have done this several times to no avail.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Digital Cameras

I have a Sony Cybershot DSC-W120 digital camera. The problem I am having is in regards to the lens going in and out whenever I switch on the device. The an error message appears on the screen saying "Turn the power off and on again". Should I take apart the camera? Please assist, thank you.


Try new batteries ... Sony Digital Cameras

The camera says please turn camera off and then on again every time i turn it on same problem as the "guest" described: the camera says please turn cmaera off and then on again... but nothing happens. i can see the picutres but i am not able to take pics or to download them. any suggestion will be much appreciated!!!!


Mine did this....New batteries did the trick... ... Panasonic Lumix DMC-LS75 Digital Camera

Okay, first off i have a sony-cybershot dsc-W80 and one day i brang it to the park and dropped in the sand accidentaly. Now whenever i turn it on, it says cyber-shot on the screen and the lens goes out and in about 4 times, then on the screen it say please turn power off and on again, and it keeps doing the same thing over and over again. please help!


These are always lens error messages-the lens is stuck or off track and camera will need to be serviced ... Digital Cameras

I just got my Polaroid a800 camera and I plugged in my USB for it. When I turn it on it shows a diagram with : PC, Pictbrigde , Next... what do I do I pressed next but it says busy...please wait! for about 20 seconds then says error, then turns off ! What do I do?! Please notify me! Thank You Rebbeca Burcawitz


It sounds like it wants you to choose between PC and Pictbridge, and then press next. Pictbridge is used for printing directly to a printer, without going througha computer. You want PC, to connect to the pc. It can be difficult to tell which of two ... Digital Cameras

I dropped my camera on the floor while i was taking a picture , the camera shut off , but the lens stayed popped out . i tried to turn the camera on again , but i would only show me the home screen , which says "Kodak Easy Share System , Share" then the camera freexes up , and it say in the top left corner , "lens error : 22" i've tried smacking it against things , i've tried smacking it on my hands , i've tried pulling out the lens , NOTHING WORKS. Please Please Please Please Please Please Plea


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Kodak EasyShare CD33 Digital Camera

Zoom problem The camera I have don't allow the zoom to come out, when I turn camera on it says "zoom error" and then I can't do nothing on camera,not even look at pics I have taken. It does it alot, sometimes the camera will turn on without saying it,but it's very rare. And sometimes I can turn it on and it will say "zoom error" but if I press zoom in the camera will work. But it's very rare that it works. I love the camera and hope there is a solution.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Zoom DualCam 1300 (1599) Digital Camera

The camera says please turn camera off and then on again every time i turn it on I dropped my camera and now when I turn it on the lens goes back and forth and the display reads "Please turn camera off and then on again"


Hi,\015\012I too have the sam problem but was able to solve it. I called the 1-800-number and was told that this is a very common issue or this camera. They told me to tap the lens when it was extended on a cloth or ... Panasonic Lumix DMC-TZ3 Digital Camera

There are several problems with my camera one of them is the fact in that Every time i turn on my Lumix 10x mega pixel camera the lens won't focus it also won't let me take any pictures. When i turn the camera off the lens won't go back into the camera but when i turn it back on the lens gos in and then out again. There is one more problem whenever i go to look at the pictures on play i can look through a few before its says "please turn camera off then on a again" it also says the same message


OK, if there is sand in the camera, the gears will bind or stop causing the error that you described. I think it needs to be taken apart and cleaned by a service center before using again. Or you could buy a spare caemera to use on your family holida ... Digital Cameras

When i turn my S2980 on it says please turn off an turn back on ive done that an even tried new batteries but i still get the problem an the manual dont say whats wrong either


... FujiFilm FinePix S2980 Digital Camera Black

When I turn on my camera it say my card is locked and I manually switched the little switch on the memory card however it still said it was locked so I bought a whole new memory card and it still says its locked even after I switched the little side thing.


There are several possible causes for "memory card locked", "memory card error", or "no memory card". Some include trying to use of a 4GB SDHC card with an older camera made before SDHC format came out. Others include problems with the tiny slide swi ... Canon PowerShot A590 IS Digital Camera

Helppp when i put my compactflash disk in my camera, it wont turn on. when i take it out of my camera, it turns on but it also says no memory card. i put the compactflash into my computer and it says that it is blank, so i dont know why it wont turn on... please help.


Remove batteries and card. Look in the card slot for any bent pins. If you see some, use a small/skinny jeweler's flat screwdriver (K-mart, Walmart, and even dollar stores sell these, look in the hardware section) to bend the pin back as close as p ... Canon PowerShot A70 Digital Camera

I droped the camra and it will turn on but when I turn it on is says "please turn camra on and off again" and when I do it it will say the same thing.


Turn off the Camera and remove the Battery from it. Then, gently hit twice or thrice near the lens with your palm. Next, press and hold the power button for 15 seconds.After performing all the above steps, insert the Battery and make sure ... Sony Cyber-Shot DSC-P32 Digital Camera

My Canon A460 says the Card is locked. The lock switch on the card is set to unlock. I have another camera with a similar card. Both cards work in the other camera. neither card will work in the A460 both say Card Locked. It must be something in the camera. I have tried the turn off remove card turn on take picture. No card message. Turn off replace either card and see Card Locked.


Back up your data first,thenyou reformat the memory card in the camera.i guess you have formatted the memory card in another device.canon cameras generally do not accept cards that have been formatted in another device.then sitch off the camera and r ... Canon PowerShot A75 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2706 seconds