Having problems with your Panasonic Lumix DMC-FX3 Digital Camera ?

The lens does not come out, the motor is humming as if it's trying to come out, but does not.

Answers :

Fixing a Lens Error on a Digital Camera
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FX3 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The lens does not come out, the motor is humming as if it's trying to come out, but does not.

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic Lumix DMC-FX3 Digital Camera

My lens wont come out of my casio exilim, the shutter doors oopen half way. The motor is trying to extend the lens but wont? Can I fix this?

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Casio Exilim EX-Z57 Digital Camera

I mistakenly dropped my digital camera a few inches when the lens was out.When i tried putting it off to know if the lens would go back in,it didnt move so i forcefully pushed it back inside.Now, when i try putting it on ,the green light flashes,then goes off and the lens attempts to come out but its like its stuck or something pulls it back inside.from what i noticed the camera cant come on without the lens coming out.pls i really dnt know what to do

You've likely jammed the zoom motor in the lens. You're correct in thinking that the camera can't work without the lens out. With it being physical damage repairs wouldn't be covered under warranty so you either need to pay to have it repaired (if th ... Digital Cameras

My Z650 lens will not come out...I thought it was the battery, but after putting in a new one...same problem...you can hear the motor trying to work...it's like it's stuck...any suggestions?

I suggest check this article about this problem; lens stuck, is common defective that need new lens unit replacement or just repairable.\015\012Causes\015\012 of a Lens Error: There are a n ... Kodak EasyShare Z650 Digital Camera

"Lens error restart camera" However you can hear the motor trying to extend the lens out but lens moves fractionally in and out then shuts down. Also when turned on to view images (green light) the motor still is trying to extend the lens same as in the start function switching to the left (amber light) have tested batteries even date lithium one also memory card. Can you offer any suggestions please?

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Canon PowerShot S3 IS Digital Camera

Lens trouble My lens will not come out entirely on my camera, for when I push the button to turn it on, the lens tries to completaly come out but then quickly retracts back halfway and remains stuck about halfway open. The screen is black and the light flashes red everytime I turn on the camera, along with a noise of something stuck. I have tried using that little button that someone told me was the reset button, along with plugging it in, and charging it. None of this has helped me with fixing

Appears to be a repair issue... lens track may be off ... Olympus FE-280 Digital Camera

Cyber-Shot Dsc-W70 hi the lens won't come out i have to pull it to get it to come out then its all blurry and when i try to zoom it turns to a black screen and says turn off camera and try again and when the lens doesn't come out it does the same thing

Hi \015\012\015\012You probably have a faulty lens unit. You can make sure of this by checking that the spaces between the two rings that extend forward at switch on has the same distance between each other. \015\012\015\012If ... Sony Cyber-Shot DSC-F717 Digital Camera

Samsung digimax s1000 turned on before, lens came out then shut off.power light blinks when you try to turn it on. but will not turn back on. lights up only when button pressed. tried different batteries. Using N-Mi Rechargeable batteries. Tried with sd card Worked fine the day before. But, it looks like the lens did not come all the way out and the first lens is at an angle to the second. Gears stuck maybe? Don't remember interfering with the lens when it was turned on. If it's the gears being

Follow this link and i would try step 8 and/or step 9http://www.wikihow.com/Repair-Lens-Problems-on-Your-Digital-CameraI am a ... Samsung Digimax S1000 Digital Camera

My kodak M1063 fell while the lens barrel was out,i tried putting it off so that it will go in but it didnt move.So decided to push it in myself thinking it will come out when i put it on.Now,the lens barrel is stuck though when i try putting it on it attempts to come out but goes back inside.pls is the damage beyond repair

Hi,\015\012Unfortunately it sounds like the camera is beyond repair. When a camera's dropped like that there's a 50/50 chance that a mechanism in the lens has been broken and it's repairable. From the sounds of yours though, the fact that it won't co ... Kodak EASYSHARE M1063 Digital Camera

I am able to transfer images to my computer, but when I try to turn the M893 camera on when it's not connected to my laptop, the screen comes on for a second or two, lens comes out, green light is on and then blinks and turns red and blinks and then lens goes back in and camera turns off. I've tried removing the battery, wiping it off, putting it back in, camera also wont charge. It's never gotten wet or been exposed to extreme heat

It has problem on the lens. Lens doesn't extend when transferring pictures that's why it works. Kodak cameras are designed to automatically shut-off when the lens is struggling to go in or out.Follow step-by-step solution and repair on ww ... Kodak Easyshare M893 Digital Camera

Lens Stuck My Lens is stuck on my Coolpix S200 and I'm getting the Lens Error message. I tried to push it back in like I read on here and it went partly in and now its completely jammed. I've only had my camera for about 4 months. Please help!! I'm hoping to fix it myself. i dropped my camera and now the lens wont come out. Everytime i turn on the camera it tells me to turn it off then on again. I've done it multiple times and it doesnt work. I tryed to push the lens in and out but it doesnt ma

YOU CANNOT REPAIR THIS SOPHISTICATED CAMERA YOURSELF!!\015\012I guess pushing the lens inside may have made the problem worse.\015\012I follow a rule- if you drop an electronic equipment and a problem occurs- it usually takes a profession ... Sony Cyber-shot DSC-S700 Digital Camera

My kodak m763 quit working and i was wondering if i took it apart if i could fix it ...it may have gotten too damp in the rain, but the next day it turned on fine for viewing, then the lens would not extend out all the way out or go back in and it would turn itself off. We tried to help the lens come out, but wouldn't work and then tried to help it go back in and now its stuck and won't even try. Can i take it apart (with the right tools)...already tried everything and know i need a torx tool. d

Google the words...disassemble a digital camera. ... HP Photosmart R927 Digital Camera

Lens Error I purchased a Nikon P90 a month ago; and it was working just fine. A couple of days ago during a photo shoot (after taking 190+ photos without any trouble), the camera went crazy.. It shows a lens error when turned on; asks to 'remove the lens cap' even if it is already removed. The lens starts to zoom out & in for a couple of times; then this error message comes up and just hangs. Tried removing the card, battery and even tried re-charging the cell. I purchased it from UK, and I'm n

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Nikon COOLPIX P90 Digital Camera

Lens motor Motor is working and tries to move lens but lens won't extend. Seems like the gearing has disconnected.

You are nearly right or even has stripped gears.\015\012Check out Olympus for a possible repair\015\012I do not think you will be jumping for joy at the price though. ... Olympus Camedia C-4000 Zoom Digital Camera

Was taking pics last night at Disney World, went to put camera away & the lens would not go back in. Tried putting fresh batteries in and still nothing. Today tried again & camera comes on saying Lens Error! It's making a noise like it's trying to go in but nothing. Also nothing else working on camera either. Any suggestions please.

Get a can of compressed air, attach the included straw, aim it at the crevice where the body and lens housing meet. Now give it two or three good blasts and power the camera at the same time to see if the lens retracts, if not! take the ... Nikon COOLPIX L18 Digital Camera

I can only turn on my Cybershot DSC-N2 while the camera is in playback mode. I can look at the pictures and videos and change settings with no problem.. but when I try to switch to camera or video record mode the camera turns off by itself. Sometimes the lens will come out and then the camera powers down with the lens stuck out. Other times it just shuts off before the lens even has a chance to come out. The camera has never been dropped or damaged.

First press power button for 15 seconds .Then remove memory card from it may be your memory card has some issue.also press reeset button on camera some camera has reset button.start your camera without memory card. ... Digital Cameras

Lens restart error on my Canon Powershot A460. Lens has come out and shutter cannot be closed, inspite of battery & card being removed from it. How ever many times I tried switching ON/OFF button after loading my recharged(may be partially charged) battery, it's not showing signs of recovery. Just one beep sound , a blue screen written Canon & a black screen written "Lens Restart error" comes alternatively according to the pressing of ON/OFF button.In this alternative cycle, for one cycle, a gre

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A460 Digital Camera

When the lens is closed...my camera still works just fine. But when I try to open the lens...it comes 1/2 out, then goes back in. It makes a funny noise like it's having trouble when the lens comes out the little bit it does. What can i do? Can it be fixed easily? Olympus d-550

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Olympus Camedia D-550 Zoom Digital Camera

Lens issue A black screen comes up with the word access. The lens seems like it is trying to fix itself but is jammed. After a few tries the screen says: Turn the power off and on again. I have done that and tried removing the battery for a period of time and recharging it but nothing seems to have an effect. Thank you in advance for your help.

This is either a faulty lens mechanism caused by dirt ingress or damage, thus not able to complete the process- Contact Sony for repair erstimate. ... Sony Cyber-shot DSC-W50 Digital Camera

Hp945lens When I fix a wide angle lens to my camera and switch it on, the zoom tries to come out, fails and then turns the camera off. I'm assuming that because the screw-on lens is on the outer fixed lens this is stopping the zoom from coming out which then turns the camera off. What am I doing wrong?

Hi Do you use a lens tube? You need one of these so the lens does not hit the screw on lens when it extends. Quite cheap on ebay etc. Standard 55mm thread.Hope this helpsjbrevealsall ... HP Photosmart 945 Digital Camera

Lens problem The lens on my cannon powershot A1000 will not open. When I try to turn on the camera it makes a buzzing sound like it's trying to open and then a message comes on the screen saying lens error restart camera. This camera is pretty new so I'm not sure why the sudden problem.

You should have dropped your cam down to the floor or you should have forcibly tried to put your lens inside when the servomotor lens tried to bring the lens out..take your camera to the nearest service centre..you should not try to open the cam sinc ... Canon Powershot A1000IS 10MP Digital Camera with 4x Optical Image Stabilized Zoom

I dropped my camera last night with the lens open. right away i tryed to shut it off and the lens just make a noise like their tryign to shut but they dont. i left it alone for the night and this morning it still does the same thing. The lens are just stuck open and no screen even comes up when i try turning it on. Ive had this camera for about 2 years now so i dont think i still have warranty on it. What should i do?

Take it to the repair shop, I think this is the only solution... ... Casio Exilim EX-S500 Digital Camera

Lens error I tried to turn off my camera, (Digital Ixus 60) and the lens froze halfway closed. When I tried to restart the camera, an error comes up on the screen, saying LENS ERROR, RESTART CAMERA. I had this problem before on this camera, but while it was still under warranty. I sent it to be fixed, but now it seems the problem isn't fixed. Is there anything I can do now?

The only thing is, is that it is past it's warranty. THE WARRANTY ONLY COVERS DEFECTS, AND FACTORY ERRORS. \015\012\015\012IF THE LENS DOESNT GO BACK IN, THEY CANT FORCE IT AND YOU PAY THE FULL COST OF THE ENTIRE LENS BEING REPLACED AND T ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Olympus FE-210 I dropped my Olympus FE-210 when it was on and the lens was out. Now, the camera still workes fine, but the lens will not close all the way. After I shut it off, it opens and closes as if trying to fix itslef, but tops after three tries. The zoom still works, but it makes a clicking noise as the lens adjusts. I wouldn't mind any of this, except that now I can't upload my pictures. Normally, when I hook up the USB, a screen comes up on the camera dispaying my options. Now when I ho

Dont drop it next time you ****** !!! ... Olympus FE-210 Digital Camera

Hi, I've a Sigma 28-105mm aspherical 3.5-5.6 lens. Auto focus does not engage. I can hear the motor trying, but the ring does not turn. When I switch to manual focus, I can turn the ring to focus manually, but I still hear the motor trying to use autofocus. Additionally, sometimes the shutter will not fire in manual focus while the motor is still searching. I've cleaned the contacts, but no joy. I suspect a faulty switch, but that doesn't completely explain the autofocus not engaging. I am

Well, I think you have at least one problem pinpointed, in that I suspect the focusing ring is jammed, and cannot rotate with the electromagnet signals. The other problem might be a faulty auto/manual switch. Of course, check for oxidation and e ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2395 seconds