Having problems with your Panasonic Lumix DMC-FX500 Digital Camera ?

My DMC_FX500 When in a record mode after about 10 seconds the LCD comes up withe the message ... "Please Turn Camera Off and then On Again". The lens retracts and then extends again but this message reappears whenever the camera is turned off and then on again. Can still view previous pictures I Can take pictures within that 10 seconds Only. Any ideas what might be causing this message to appear? I Have "dampened" a cotton earbud with Isoproply alcohol and cleaned inside the battery comp


Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope\012 \012the advise is useful. please do not hesitate to let me know if you need \012any further assistance. Also, please be so kind to let me know if you \012found this helpful.

Regards
Andrea
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FX500 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My DMC_FX500 When in a record mode after about 10 seconds the LCD comes up withe the message ... "Please Turn Camera Off and then On Again". The lens retracts and then extends again but this message reappears whenever the camera is turned off and then on again. Can still view previous pictures I Can take pictures within that 10 seconds Only. Any ideas what might be causing this message to appear? I Have "dampened" a cotton earbud with Isoproply alcohol and cleaned inside the battery comp


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Panasonic Lumix DMC-FX500 Digital Camera

When in a record mode LCD says to "Please Turn Camera Off and then On Again". The lens retracts and then extends again but this message reappears whenever the camera is turned off and then on again. Can still view previous pictures but cannot take pictures. Any ideas what might be causing this message to appear?


You are experiencing a media miscommunication. This due to low or incorrect amount of voltage to the cameras coding circuits.Take a Q-Tip "dampened" with rubbing alcohol and clean inside the battery compartment well. Do the battery contacts and the c ... Panasonic Lumix DMC-FX500 Digital Camera

The camera is 8.1 Mega Pixels, Model # DSC-N1. The problem: the pictures that come out are reddish and the snapshot is delayed by a few seconds whereby the camera displays "capturing" and then "processing" messages. Please help with 'how to fix' this problem. My initial thought is that it might be a wrong setting. Thank.


It sounds like you may have changed the white balance setting. The other problem could be that your memory card is getting full or needs to be reformatted. ... Sony Digital Cameras

Canon Powershot A610 digital camera--LCD screen shows icons, but otherwise is blank--there is no visible movement in the lens when I take a picture without flash--have tried setting it on TV setting and taking a picture, then opening the battery cover for a few seconds after waiting 7 seconds or so, but no images on the LCD except the camera's icons--ideas? probably a stuck shutter, or is it still possibly the CCD sensor even though there's no visible movement in the lens? Ideas? Thanks!


Much more likely that it's a stuck shutter, especially for your model camera. How many tries did you give the fix? Some people stated that it took at least 15 repeated tries before the shutter opened:\015\012\015\012\015\012 ... Canon PowerShot A610 Digital Camera

I have a Canon DS126191, When i take pictures with it it shows an error message "No contact between Lens and Camera, please clean the lens"... Any suggestions on what might be wrong and possible ideas


... Digital Cameras

We are now on our 3rd 5.0 bushnell night sentry camera and the night pictures are black. With the second camera, we might get the first picture where the flash goes off, but the subsequent ones are black. We have replaced batteries and also have a solar panel. We did use this same model of camera last winter and were getting beautiful night pictures so we decided to get a second one. Day photos are beautiful. Help!


OK, I think that this is a problem with the flash not working correctly, and you are within the warranty period, I'm hoping, so that you can get it replaced.\015\012\015\012Power shouldn't be an issue since you have a solar panel.\ ... Bushnell Trail Sentry 11-9200 Digital Camera

Today when i connected my camera to my computer i thought of copying pictures from my pc to my camera. I opened 'My Computer' and opened the folder of my camera. There I pasted one of my photos. While copying they said that it might not open or not be copied, but still i continued. When I disconnected my camera and opened it, I saw the photo i had copied there(in the camera). After that I thought of copying more pictures into the camera. Again I connected it to my pc. This tie again that message


If all the pictures you copied were originally taken with this camera, then it is certainly because you modified this particular image - renamed it or a rotation from portrait to landscape.....If this is not a picture taken by this camera ... Digital Cameras

Hi I am getting an erro message "r33" in the "number of exposures remaining box" - when the message comes up I cannot take a photo - its like the camera is locked. any ideas? also, sometimes the r33 message comes up and it does let me take the picture. so maybe the camera locking issue is not related top the r33 message? Lance


Hi,\015\012\015\012The r33 that you see on the top panel of the camera is the count of shots remaining to fill the buffer in burst mode.\015\012Looks like you must be set on jpeg.\015\012\015\012Do you form ... Nikon D90 Digital Camera with 18-105mm lens

When I try to print my pictures with my Kodak easyshare printer dock, it sends the paper through and doesn't come back. My wife has the same camera and we tried hers, it printed once and then wouldn't print again. My camera was giving me the message stating corrupt file, I spoke with several representatives at Kodak and was finally told that I should purchase a new memory card. I purchased one and tried to print again and the message on the camera stated pull the power cord out wait five second


Here is a quote from Kodac.com regarding corrupt files:\015\012\015\012\015\012\015\012\015\012\015\012\015\012Stored pictures are corrupted. \015\012\015\012\015\012\015\012Retake pictures. Do not ... Kodak EasyShare M853 Digital Camera

Dear sir, I am having one Olympus C-5500 digital camera.Whenever I insert xD-picture card and power on the camera, LCD dispay will come as "card full" or picture error and the camera automatically shut off.After removing card it works with LCD message- no card. My second problem is the data from the xD-picture is not open in a compuetr. kindly advice suresh babu [email protected]


P/l call this number 020 30217602/600/700/709 mr rajesh gaonkar from data care corporation ... Olympus Camedia C-5500/C-55 Sports Zoom Digital Camera

Lens error CoolPix L11. I switch on the camera The lens comes out. A picture is shown for about 1 second. Then the message Lens Error is displayed. The lens is retracted. After 15 seconds or so the camera switches itself off. The camera was bought in USA as a gift for a friend in Sri Lanka. Not so easy to get a local repair - if this is at all possible anyway. What is your advice? Thanks James


Try the procedures in this tip. ... Nikon Coolpix 5700 Digital Camera

Memory card error - After taking about 300 pictures on a 2 Gig Kodak SD memory card. I get a message on my Canon camera that says '' memory card error'' I tried to put the chip in a differant camera but it tells me to '' Format The Card'' I am afraid if I do that I will loose all of my pictures. I tried to load the pictures into my computer the way I always do and nothing happens. Any helpful ideas ? Thank You


Take no more pics until you've recovered the photos, take the card out of the camera. Here's some freeware photo recovery software th ... Canon Digital Cameras

Purchased camera in March and working great until yesterday. Took a batch of pictures yesterday but was not able to download most of them to my computer. Got computer message "there are no images in the camera or memory card that match download conditions". Also couldn't download on a second computer. All pictures display on the camera playback feature. Put memory card into a Canon digital and they display and was able to download all photos using Canon. Deleted card and took new sample photo


Sounds like you're switching the same card between cameras. Rule #1...one card per camera. Format the card in the camera it is to be used in. There is no Rule #2. ... Panasonic Lumix DMC-FZ28 Digital Camera

Canon powershot s1 is this camera shows a black screen all the time except when putting camera to display mode, when it will show previously taken pictures. I have tried changing batteries and memory cards. I have also tried taking a 15 second picture and removing and inserting batterise to no avail/ Any ideas?? ian


See this link. The details apply to US residents, but the service n ... Canon Digital Cameras

When I recently turned on my camera (D-630 Zoom) to take a picture, I got the message titled Card Setup, with two options "Power off" and "Format". I turned the camera off, took out the memory card (1GB) and put it back in, as I did the last (and only) time this happened, about two years ago. But it has not worked, and I have been getting this message with the two options for a few days. Any ideas? Thank you.


If this exact card has worked in the camera before, chances are it has gone bad. Typically, if the camera says to format the card it is because it does not recognize the card. The only reason this would happen is if the card is unreadable from malfun ... Olympus D-630 Zoom Digital Camera

The camera switches on fine - will take a pictur/ review - but then requests that the camera bes witched off/ on- do that - screen message appears system error [o.i.s]. Happened to try the camera with out memory card [ SanDisk ultra 8GB] - works fine! - tried another cars [same model] from another camera - same problem! any ideas gratefully received


The problem is isolated when there's a memory card in the camera, is it right? Are you using a brand new memory card? What type of card is it (SD, MicroSD, MiniSD)? If it's brand new, you need to verify with the manual if the camera could ... Digital Cameras

Blury pictures okay every time i ake pictures of myself i'd put it on self timer for 10 seconds and i pose and when i look at the picture it look alright from far put when i zom into myself you can see the little pixels like square pixels you can see them and when i upload them to my computer to see it big it like all like blury and square and i want to be able to be cleari dont know in the past i might of pressed a buton on the camera but when i bought it was really clear spent like 280 on it.


Make sure the megapixel is to full potential. somethimes ive seen them drop to smaller megapixel after a reset. ... Sony Cyber-shot DSC-S650 Digital Camera

My first upload of pictures from a new Vivitar V25 camera (a budget model). I have 15 photos on the camera to upload. After starting the upload, the third photo has vertical lines on one side on the uploaded copy only, and then the uploads stalls, with a final Windows message of "v25.exe has stopped working". I have tried restarting my computer, checking cable connection with camera; nothing seems to work. Any ideas?


... Digital Cameras

I have a Minolta Dimage 7Hi and get a 'card error' message when I turn it on, in the middle of the viewing screen. The camera acts like it takes a picture without the button being pressed, then the red light next to the card goes on and off for about 10 seconds. Then the camera shuts down. It repeats this when I turn the camera back on and doesn't respond to any other settings or button pressings. Can you help?


Format CF memory card to FAT16 - 7hi does not recognize FAT32 nor NTFS ... Konica Minolta DiMAGE 7Hi Digital Camera

I bought a used Sanyo 8.1 MP camera, and when I turn it on(it has new batteries in it) then push the button to take a picture, the shutter closes and turns the camera off. Any idea what might be causing this?


You should try cleaning the shutter flaps with a can of compressed air. Maybe it helps. ... Sanyo VPC-S880 Digital Camera

Camera won't save pictures error message when turned on: !!! Bad data access address!! Bad Address = 0 X 00000028 PC = 0 X 00675e30 Reason: 15 sp = 0 X 00f1178c Domain: 11 and other numbers and then shuts down. Error message lasts around 5 seconds.


... HP Photosmart R725 Digital Camera

With our panasonic DMC-LZ5, first we got a message saying replace batteries, which we did (with new ones). Now, the screen is all white with a message saying please turn camera off and then on again. We've tried several sets of batteries, and turned it off and on again. The picture of the battery is all in white, with a line through the middle. Any ideas on how to reset?


Http://www.fixya.com/support/t1100571-lumix_dmc_lz5_replace_battery ... Panasonic Digital Cameras

After every picture I take the screen goes black for a couple of minutes so I cant take more than one photo at a time. I have to power the camera off and turn it back on to take a second pic. The battery is fully charged and the camera is fairly new and lightly used. Any idea how to correct the problem?


Are you using a cheap card? Is the card full with a large number of pictures? ... Nikon COOLPIX S10 Digital Camera

Panasonic NV-DS27EG problem: sudden degradation in function following (though could be coincidence) first ever use of DV-out socket on camera (to connect Dv-in on Panasonic DVD recorder). First symptom: no picture displayed when attempting to play back a tape in VCR mode. Second symptom: power light stayed on even when camera switch was at the off position. Third symptom: message in viewfinder asking for the reset button to be pressed. Found and pressed reset button then: Fourth symptom: "to ser


... Panasonic Digital Cameras

This is a recently purchased camera that was working beautifully until recently. It just stopped taking pictures; when the shutter release is pressed, nothing happens. The only clue I have to what is happening came when I pressed the Quick View button and got a No Card message. I changed the CF card to one I took from my Canon Rebel XT and that I knew was working fine - again the message No Card when the QV button was pressed. Does that help at all in defining the problem? Any ideas what the pro


Hi!! :\015\012You can try this, start the camera without the CF in SETUP mode, once you're in... insert the card and format it!!!. It worked for me..... ... Konica Minolta DiMAGE 7 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4313 seconds