Having problems with your Panasonic Lumix DMC-FX9 Digital Camera ?

Hi, my panasonic dmc-fx9 got wet with some sea water while I was making some photos on seaside, then I turned it off to remove the batery,... but it never turned on again, so can someone help please, thank u!


Answers :

Salt Water? KIss it goodbye. Cause corrision on internal parts. Time to go shopping
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FX9 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi, my panasonic dmc-fx9 got wet with some sea water while I was making some photos on seaside, then I turned it off to remove the batery,... but it never turned on again, so can someone help please, thank u!


Salt Water? KIss it goodbye. Cause corrision on internal parts. Time to go shopping ... Panasonic Lumix DMC-FX9 Digital Camera

The lens on the camera is stuck out. When I turn the camera on. It doesn't go past the samsung picture screen i have saved on there. It won't let me go to the menu or anything. It won't let me turn it off, I have to remove the batteries.. Please let me know what I can do.. Thanks!


My scream is on but the lens are stuck and just a couple of second , the camera start a 3 sound and shuts down ... help\015\012me ! ... Samsung Digimax S730 Digital Camera

My fuji finepix S2 pro camera can not turn on when i put 2 cr batteries into its grip, when i remove 2 cr batteries it's turn on and work but i can't using flash, error no cr batteries found. Please show me how can i fix it. thank.


This is an old post but if you haven't found your solution yet here is the solution.The Fuji FinePix S2 Pro uses two sets of batteries one set located in the camera body grip and another set in the battery grip itself. If you are experiencing t ... Fuji FinePix S2 Pro Digital Camera

When I transfer photos from my Canon digital camera SX10 IS to the computer monitor through the card reader all goes well EXCEPT that when I remove the card from the reader and re-insert it in the camera, the screen on the camera back shows the wording "NO IMAGE". This never happened to me before. What am I doing wrong please? Many thanks for helping an oldage pensioner still baffled with computer navigation.


Hello!I might have understood you incorrectly, but if I do - the NO IMAGE message tells you that there are currently no photos on the memory card. The way I see it (please correct me if I'm wrong), when connecting the memory card to ... Canon Digital Cameras

Kodak v610 camera (easy share) My 10 year son was using our v610 camera and the following error message E45 (please see user manual) appeared on the screen. We were unable to switch the camera off and therefore the shutter remained open. The shutter will only close if I remove and replace the battery and when I turn the camera back on the shutter remains open and the same error message returns. I have checked the manual and it doesn't mention this problem. thank you jane


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Kodak EasyShare V610 Digital Camera

I have removed the battery and CF card and re install battery. When I turn it on, it reads no CF card, however, when I insert card, it freezes, it does nothing. I just purchased a new CF card, but it continues to do the same. only thing that comes on is the EOS part. Please help. It is a Canon Rebel EOS 300. Thank you.


Hi there, You need to reformat the CF card first. 1. Put the CF card into the EOS DIGITAL REBEL camera, and turn on the Power Switch. 2. Press "MENU" \015\012 button and select the tools "Setup" menu. 3. Select \015\012 ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

Every time I turn it on, it wants me to set the date and time... It has never done this before I took the memory card out as well as the battery and put new ones in but it does the same thing please help... Thanks J


Once you set date and time, it wont ask you again. I think you always cancel date and time settings, when it asks. ... Sony Cyber-shot DSC-W70 Digital Camera

Black Screen The camera was never dropped. And, it worked perfectly just 1/2 hour before the problem occurred. Turn it on, Canon logo shows up, then black screen with 2 beeping noises, the screen says E18 and the camera shuts off by itself. Please let me know what the problem is. I am very frustrated about this!!! Many thanks.


Cannon will repair it free of charge,its a problem with ixus 400. ... Canon PowerShot S400 / IXUS 400 Digital Camera

DROPPED E-410 I was attempting to download some pictures into my computer,(cable attached) my phone rang, and i knocked my camera down (ripping the USS cable out)when i picked the camera (E-410) back up the screen kept saying card cover open.I have opened the cover,removed the card , replaced the card,turned the camera on/off,at this time if you cannot assist me in solving this situation, canyou please point me in the right direction(NYC,anywhere that i canget this fixed quickly. THANK YOU!


Olympus repair is in Happauge, NY on Long Island ... Olympus EVOLT E-410 Digital Camera

Hello. I'm trying to install my pictures from my camera to computer. I've never had problems in the past, but now it's saying "camera is not recognized". I've tried unplugging the usb cord, turning the camera and computer on and off, reinstalling the program, changing the batteries, putting the memory card directly into the computer (which does not pull up any options or do anything). Please help! Thanks in advance.


Time to start using a card reader for downloads. ... Canon PowerShot A530 Digital Camera

I have cannon power shot a95 camera. when I turned on today the lcd screen was blank and it takes black photoes. Working though as you can review past pictures. Changed the bateries and memory card. Reconfigured memor card also. The icons show on screen. The shutter is opening and the counter is advancing and flash working. please help me. thanks


Call support 1-800-828-4040 and describe your problem to them.They are going to send me a shipping tag for free shipping and will repair the camera for free if the problem is the CCD Image Sensor.Consumer Products Hom ... Digital Cameras

When i turn on my powershot A75 Canon camera the screen is black. I have taken out the batteries and replaced them also, this has not checked the problem.... I have also taken out the memory card and put it back in and this still has not helped the problem. The camera has never been dropped so i am unsure of what the problem could be. please get back to me and let me know what i should/can do. thank you Lorraine


This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot A75 Digital Camera

I have had the camera for a year and have had zero problems. Suddenly taking a picture was a sound in the flash and the camera shot down and it will not turn on. I have recharged the battery and I have also tried my charged up replacement battery. Since I've had the camera,I have never run the battery down Please help. Thank you


Sounds like a circuit blew...you probably need service. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

The display turns white and no control works. To turn it off I have to take out the batery. To turn on again I have to try many times putting batery inside and pushing button "on". After some time, the problem repeats. Thanks Murilo


... Sony Cyber-shot DSC-W100 Digital Camera

I have to remove the battery from the camera and wait five minutes, reinstall the batery and the camera will turn on. If I turn the camera off it will not turn back on without removing the battery, waiting and reistalling it.


Next time you get the camera to turn on, go into the menu and scroll to "reset" and follow the on-screen instructions. ... Sony Cyber-shot DSC-W55 Digital Camera

I just got my Polaroid a800 camera and I plugged in my USB for it. When I turn it on it shows a diagram with : PC, Pictbrigde , Next... what do I do I pressed next but it says busy...please wait! for about 20 seconds then says error, then turns off ! What do I do?! Please notify me! Thank You Rebbeca Burcawitz


It sounds like it wants you to choose between PC and Pictbridge, and then press next. Pictbridge is used for printing directly to a printer, without going througha computer. You want PC, to connect to the pc. It can be difficult to tell which of two ... Digital Cameras

I'm a new user of the D90 (and digital in general), and on my first major trip with it I had problem with the shutter not working. I would take some images, put the camera down without turning it off and move on to the next spot. At the second stop the camera would not work. I'd turn it off, remove the battery, run the lens in and out and eventually it would work again. The message I got was F--, which said that the lens was not installed properly. However the lens was never removed. What's


George,Since you didn't say if this was a "new camera & lens" or if it was a "new to you" camera and lens, or which *exact* lens you have, there are a couple of ways this can work.Nikon lists the following remedy for error ... Nikon D90 Digital Camera with 18-105mm lens

The camera says. please set date and time and after i press ok. the screen will show, initialization error, please turn off camera and turn on again. what solutions should i make? thanks a lot!


Hey, I am having the same problem with mine! I asked the same question on here with no response. I have recharged the battery, reset the camera, and everything but i don't know what to do...do you ever figure anything out? let me know: [email protected] ... Nikon D40 Digital Camera with G-II 18-55mm Lens

Help I have a Kodak easyshare Z812 IS When I turn it on to take a picture it either, flashes green, turns on then off right away or the format something or other comes on. I have changed batteries several times, even erased pictures help what do I so? With 4 grandbabies and halloween right around the corner I need my camera. Please could someone help me Thank, Cheryl Please reply to [email protected]


Does the lens extend fully from the camera before it turns off or does is stay retracted? Has this been dropped or gotten wet recently? Try removing the SD memory card from the camera and powering it up to see if you still get the "format" prompt. ... Kodak EasyShare Z812 IS Digital Camera

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera


\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc"  uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras

About a week ago I turned on my Lumix TZ5 and in the screen displayed this message: "please turn camera off and then on again. I have taken the battery off and I have charged, but the message still displays. When I turn the camera on, the lens extends to the maximum but when I try to use the zoom the camera doesn?t respond. Then if I turn it off the lens stays out. Any idea? Thanks in advance. P.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Panasonic DMC-TZ5 Digital Camera

MEMORY CARD I bought a memory card to my camera and when I incert it the camera have a rare sound and turn off. Every time I turn on the camera, show me a window to format it and if I press yes, do the sound and one more time turn off. The memory card is a Sandisk SD 2GB CARD. Please help me. Thanks. Send me a message at [email protected] Have a nice day


It happend with me .\015\012this camera was degined to use SD card by max 32 MB or may be less.unless there is a softwear to allow the cam to accept the bigger capicty like SD 1 or 2 GB ... BenQ DC3400 Digital Camera

When i take a picture it works fine..but then i try and take another picture and it appears the whole functions of the camera is locked up..cant do anything..however the screen still shows a image.. to take another picture i need to turn off and turn on the camera again and then it will only allow me to take one picture then i have to turn it off and on again.. please help with this problem...im sure its something simple but it is very frustrating thank you


Firstable go on to your camera settings try looking around for the problem if this does not work get it repaired hope you have warrenty if you don't itll be a little expensive so goodluck:) and please rate this solution...\015\012But if this do ... Digital Cameras

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks.


Try the procedures in this tip. ... Canon PowerShot SD750 / IXUS 75 Digital Camera

When I turn the camera on, it buzzes four or five times (a sound I have never heard it make before) then displays "Please turn the camera off and then on again". When I turn it off, it buzzes again two or three times, the screen goes blank, but the lens does not retract. The battery is charged, and the problem is the same whether in picture or display mode, whether plugged into the computer or not.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-TZ50 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4086 seconds