Having problems with your Panasonic Lumix DMC-FZ1 Digital Camera ?

Cam. says remove lens cap and press set button


Answers :

Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FZ1 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cam. says remove lens cap and press set button


... Panasonic Lumix DMC-FZ1 Digital Camera

PANASONIC dmcfz8 Problem: When I turn on the camera and remove the lens cap I get a message on the lens that says "remove lens cap & press button". It seems like the zoom is stuck. We were using the camera for a inside night graduation & was at a distance from the subject that we wanted to shoot. After a few zoom shots we shut the camera off and when we tried to take more pictures the above problem started. Please Help!


Try to help the lens go out by pulling it very very lightly... ... Panasonic Lumix DMC-FZ20 Digital Camera

I have a panasonic DMC-FZ8 Digital Camera. When I switch the camera on, the lens won't open. It says I must "remove lens cap and press fwd button". The problem is that I don't have my lens cap on, but when I do what it said, the lens still won't open to zoom and take pics. Please urgently assist me.


Go into the setup menu and scroll to "reset"...follow the on-screen instructions. That might work. ... Digital Cameras

Panasonic Lumix dmc-fz8 I turn the camera on, it wont focus and the lens doesnt start coming out. Then it says remove lens cap and press > button. Even though my lens cap is off


Hi,\015\012When the lens cap off there will be sensor inside your camera it will switch on automatically perform the normal functioning of camera . You are facing this problem due to defective sensor . You need to take to service center to repa ... Panasonic Lumix DMC-FZ5 Digital Camera

Panasonic dmc-fz5 camera says remove lens cap and press- button even though the lens cap is already off


I posted a solution yesterday on Fixya, but can't find it. Same problem, same camera, solution reached on Feb 10 2009 after a couple days of frustration. I gently wiggled the lens by pushing my fingers one on either side (not the outer ring, but th ... Panasonic Lumix DMC-FZ5 Digital Camera

Lcd reading lcd screen reads remove lens cap and press set button


The lens is getting stuck when you power up the camera, have one doing the same thing as well as giving me a card read error. ... Panasonic Lumix DMC-FZ1 Digital Camera

For some reason my camera keeps comming up with a "REMOVE LENS CAP AND PRESS > BUTTON" error but the lens cap isn't on the camera :(


I dropped my FZ8 and had the same problem. Unfortuately, trying to push the lends back into place did not work, so I disassembled the camera using the instructables link and the comments there. Now the camera works fine thanks to everyone's help. ... Panasonic Lumix DMC-FZ7 Digital Camera

My DMC-LX3 got an error message on "remove lens cap and press any button" when the lens cap have already removed!!! i have tried to take out the battery & sdhc then reload them but the camera didnt work!!!! did the lens got stuck?? help!!!!


Lens probably does not extend or retract because of debris or a misaligned gear box. The\012lens can in about 50% of the cases be repaired without having to replace it. Try to\012return to manufacturer first. If you're out of warranty, there are\012t ... Panasonic Lumix DMC-LX3 Digital Camera

Lumix keeps showing message 'remove lens cap and press > button


1. Power off\015\0122. Remove the battery.\015\0123. Put the battery to its place\015\0124. Power on\015\0125. If nothing happens\015\0126. Replace the battery with charged one\015\0127. Power on again\015\01 ... Panasonic Lumix DMC-FZ3 Digital Camera

"Remove lens cap and press ** button"


... Panasonic Lumix DMC-FZ28 Digital Camera

Dmcfz8 telescopic lens stuck in the outward position. message states remove lens cap and press button. The lens cap is off


... Panasonic Lumix DMC-FZ8 Digital Camera

When i turn camera on,it tells me to remove lens cap and press right button.the cap is not even on the camera and when i press the right button the message reappears.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic Lumix DMC-FZ4 Digital Camera

LCD showing "remove len cap and press reset button" always


Simple! Read warnings carefully! It said "remove lens cap and press SET button"! So remove the lens cap and then press the SET button (or arrow downward in the four directions button)! You don´t need to RESET anything... ... Panasonic Lumix DMC-FZ1 Digital Camera

Error message- remove lens cap and press > button


Is your lens not retracting?I've got the same problem and with the lens not retracting - this is why i get the message. ... Panasonic Lumix DMC-FZ7 Digital Camera

Hello I just purchased a .42 wide angle fisheye lens for my panasonic lumix dmc-fz8 and when i bought it on ebay it said its for either a fz7/8. When i tried to attach it today the lens adapter does not fit the thread. I was wondering if maybe the lens on the camera should be taken off? I'm not sure. And it is possible to just use the fisheye lens without the adapter? Because it fits when just put the fisheye lens but when i turn it on it says "please remove lens cap then press play" so I'm very


... Digital Cameras

Trouble focusing I am using my D60 with a 18-55mm lens, i have it set on auto its been working fine until recently when it is unable able to focus when i press on the release button. All that seems to happen is the lens keep going in and out where it is trying to focus. I have removed the lens and checked the contact but its still not working help!!!


Not too many things that can do this are simple, but here are a few you can check. First, make sure you aren't too close for the lens to focus. For the 18-55, that's only about 5" from the front of the lens, so I doubt this is the problem. \ ... Nikon D60 Digital Camera

I dropped my Panasonic Lumix DMC Fz7 camera and it landed on the lense while open. now it's jammed and won't open or close. when I turn it on I get the message "remove lens cap and press arrow button" even though the lense cap is not on.


... Panasonic Lumix DMC-FZ7 Digital Camera

Similar problem -Error message Remove Lens Cap and press button.


After reading \015\012\015\012di_nick34 solution about removing sand, I removed the lens hood adaptor, and blew air between the gap, re-screw adaptor on. Heard a few clicks - must have broken some minute dust/dirt. Remove hood again, and fur ... Panasonic Lumix DMC-FZ8 Digital Camera

What does "remove lens cap and press > button" mean? on my Lumix DMC-FZ8 camera


... Panasonic Lumix DMC-FZ8 Digital Camera

Camera shuts down after shutter button is pressed. It shuts down halfway through the shutter operation. Everything else works fine-reviewing pictures, settings in menu, focusing, exposure settings etc. The camera focuses ok when the shutter button is half pressed then when you press the shutter button fully, the mirror goes up, shutter appears to open then the camera shuts down with no power. Only way to get mirror etc back to normal is to remove the battery and refit. When camera is turned b


... Canon EOS 40D Digital Camera

Using my Canon XSi/450D, I'm interested in doing High Dynamic Range photography. But I can't discover how to make the automated shutter-speed range multi-shot (3 for the 450D) AEB work. I've gone into the menu and select and change the AEB range ( -2V) and pressed "set." Working from the "AV" in creative mode, I then set up my first shot with focus and ISO, and shoot. Now what? When I press the shoot button, an ordinary photo is captured, and if I continue to press the button additional cap


Click on this link http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=139&mod ... Canon Digital Cameras

DSC-W200 Frozen My W200 has the lens open (extended) and will not close. Additionally, when I press the power button or the play button on the back, the LCD lights up and says Sony, but nothing else happens. I've tried connecting it to my macbook, using a fully charged battery, memory card vs no card, etc. Nothing seems to work. If I press the power button a seond time, the green power light goes off, but the LCD still says Sony. Any help would be greatly appreciated. Not too eager to send it


Try this it works for lens problems like you describe ]]] OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local gara ... Sony Cyber-shot DSC-W200 Digital Camera

Command dial on a friend's Fuji Finepix S9000 is NOT functioning. Can't control aperture, shutter speed, flash settings, etc. Can it be opened and fixed (he has no warranty, thus no problem with opening it). Is there a special setting or way of turning or pressing buttons that he is doing wrong? It says to press (and hold?) a button then twist the dial, but no change is made as far as I can see. I have tried enless things and have much experience (though I'd be a fool not to ask others). A


Hi. I just bought this exact model on ebay and it arrived with the same problem. I found many others with the same problem on various sites, but happened upon this extremely thoughtful man's album showing the steps to fix it. Thought I'd share with y ... Fuji FinePix S9000 Zoom Digital Camera

Lens cap When I turn camera on it say remove lens cap but the lens cap is not on


Place the lens cap back and then off the camera. after that turn onn agin and remove safely ... FUJIFILM FinePix S4000 / S4050 Digital Camera

Lens Error. My Nikon COOLPIX L3 keeps on saying " LENS ERROR" and wont close up. Also it make some rattling noise when i press the on/off button or sometimes does it by itself. First the screen is bla


Try these procedures. ... Nikon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4363 seconds