Having problems with your Panasonic Lumix DMC-FZ1 Digital Camera ?

Lcd reading lcd screen reads remove lens cap and press set button


Answers :

The lens is getting stuck when you power up the camera, have one doing the same thing as well as giving me a card read error.
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FZ1 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lcd reading lcd screen reads remove lens cap and press set button


The lens is getting stuck when you power up the camera, have one doing the same thing as well as giving me a card read error. ... Panasonic Lumix DMC-FZ1 Digital Camera

Hi my camera as the lens stuck it makes an error sound of 2 beeps followed by 3 beeps if i press and hold the on button and then press the on button it makes the first 2 beeps lights the lcd screen where you ca read ver. 1.02 and switches of with the 3 beep error and switches back off. any idea??? thanks in advance


Try the procedures in this tip. ... Casio Exilim EX-Z30 Digital Camera

LCD showing "remove len cap and press reset button" always


Simple! Read warnings carefully! It said "remove lens cap and press SET button"! So remove the lens cap and then press the SET button (or arrow downward in the four directions button)! You don´t need to RESET anything... ... Panasonic Lumix DMC-FZ1 Digital Camera

Cam. says remove lens cap and press set button


... Panasonic Lumix DMC-FZ1 Digital Camera

LCD Display I haven't used my canon for a while - I've just turned it on and though the LCD display works to show pictures I've taken and the settings screen - I can't see anything in it when I take a picture (it's just black) when I press the Disp button it just switches from a black screen to the settings screen - please tell me what I can do so that I can see the image in the LCD before I take the picure. Thanks for your help


As far as I am aware, the 400D doesn't have a live preview mode.What you are describing is perfectly normal and is how 99% of digital SLR cameras behave.Are you sure it used to do this?Matt ... Canon EOS 400D / Rebel XTi Digital Camera

For some reason my camera keeps comming up with a "REMOVE LENS CAP AND PRESS > BUTTON" error but the lens cap isn't on the camera :(


I dropped my FZ8 and had the same problem. Unfortuately, trying to push the lends back into place did not work, so I disassembled the camera using the instructables link and the comments there. Now the camera works fine thanks to everyone's help. ... Panasonic Lumix DMC-FZ7 Digital Camera

Press pwr button the lens extends lcd screens is on for 3 sec. then go's out and lens will not retract press pwr button again lens retracts and extends right back out.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Kodak EASYSHARE V1253 Digital Camera

PANASONIC dmcfz8 Problem: When I turn on the camera and remove the lens cap I get a message on the lens that says "remove lens cap & press button". It seems like the zoom is stuck. We were using the camera for a inside night graduation & was at a distance from the subject that we wanted to shoot. After a few zoom shots we shut the camera off and when we tried to take more pictures the above problem started. Please Help!


Try to help the lens go out by pulling it very very lightly... ... Panasonic Lumix DMC-FZ20 Digital Camera

My DMC-LX3 got an error message on "remove lens cap and press any button" when the lens cap have already removed!!! i have tried to take out the battery & sdhc then reload them but the camera didnt work!!!! did the lens got stuck?? help!!!!


Lens probably does not extend or retract because of debris or a misaligned gear box. The\012lens can in about 50% of the cases be repaired without having to replace it. Try to\012return to manufacturer first. If you're out of warranty, there are\012t ... Panasonic Lumix DMC-LX3 Digital Camera

White Screen Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white picture which can be deleted. The camera does not flash although flash is set to automatic and photo taken in a dark room. Camera flashes (weakly) with flash set to manual on. Lens is unobstructed and appears to be perfectly normal. Camera was not dropped. Batteries have been changed.


\015\012Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white pictur ... Pentax Optio E10 Digital Camera

I reset my DSC-2T00 by removing battery and pressing power button for 1 min. My LCD screen still does not show anything; however, when I click the button to take picture camera does flashes. But the LCD screen does not show anything again. Any help would appreciate???


No back lite ... Sony Cybershot DSC-T200 Digital Camera

Need help urgently!!! GR-D22 not recording. I have a JVC GR-D22 Digital Video Camera (about 3 yr. old). It had been working fine. But recently it did not work anymore. The LCD screen is on, but a black picture. When you first turn it on, the reminder to remove the lens cap flashes (lens cap is off). Then that will go away and still no picture. All the dates and everything else is showing up on the screen but no picture. I have tried to adujust it according the guide but no help. Same thing i


There is a good chance that the iris is stuck shut. Try tapping the side of the camera lightly to try and release it. If the camera can show you old pictures that are currently stored correctly, I would suspect the iris.\015\012\015\012 ... JVC Digital Cameras

I have a panasonic DMC-FZ8 Digital Camera. When I switch the camera on, the lens won't open. It says I must "remove lens cap and press fwd button". The problem is that I don't have my lens cap on, but when I do what it said, the lens still won't open to zoom and take pics. Please urgently assist me.


Go into the setup menu and scroll to "reset"...follow the on-screen instructions. That might work. ... Digital Cameras

"Remove lens cap and press ** button"


... Panasonic Lumix DMC-FZ28 Digital Camera

Lumix keeps showing message 'remove lens cap and press > button


1. Power off\015\0122. Remove the battery.\015\0123. Put the battery to its place\015\0124. Power on\015\0125. If nothing happens\015\0126. Replace the battery with charged one\015\0127. Power on again\015\01 ... Panasonic Lumix DMC-FZ3 Digital Camera

Panasonic Lumix dmc-fz8 I turn the camera on, it wont focus and the lens doesnt start coming out. Then it says remove lens cap and press > button. Even though my lens cap is off


Hi,\015\012When the lens cap off there will be sensor inside your camera it will switch on automatically perform the normal functioning of camera . You are facing this problem due to defective sensor . You need to take to service center to repa ... Panasonic Lumix DMC-FZ5 Digital Camera

Lens restart error on my Canon Powershot A460. Lens has come out and shutter cannot be closed, inspite of battery & card being removed from it. How ever many times I tried switching ON/OFF button after loading my recharged(may be partially charged) battery, it's not showing signs of recovery. Just one beep sound , a blue screen written Canon & a black screen written "Lens Restart error" comes alternatively according to the pressing of ON/OFF button.In this alternative cycle, for one cycle, a gre


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A460 Digital Camera

Dmcfz8 telescopic lens stuck in the outward position. message states remove lens cap and press button. The lens cap is off


... Panasonic Lumix DMC-FZ8 Digital Camera

Panasonic dmc-fz5 camera says remove lens cap and press- button even though the lens cap is already off


I posted a solution yesterday on Fixya, but can't find it. Same problem, same camera, solution reached on Feb 10 2009 after a couple days of frustration. I gently wiggled the lens by pushing my fingers one on either side (not the outer ring, but th ... Panasonic Lumix DMC-FZ5 Digital Camera

When i turn camera on,it tells me to remove lens cap and press right button.the cap is not even on the camera and when i press the right button the message reappears.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic Lumix DMC-FZ4 Digital Camera

The LCD screen only switches ON in C(Custom) Mode and tansfers to Viewfinder in other Modes.In display Images mode it regains to the LCD screen but as soon as the click button is pressed it again switches over to the Viewfinder I have tried with the Power Saving options and the Custom Settings with no fruuitful result. Please kindly help me in sorting out this problem


Try pushing the disp. or display button. I hope this helps! Please rate my answer. ... Canon PowerShot A570 IS Digital Camera

I received a Leica Digilux 2 from a relative and i cant seem to see anything thru the viewfinder or the lcd screen. Its just black. Is the shutter not open? I can see all the numbers and settings around the lcd screen border and can take pictures and video but the pictures are just black. The lens cap is off so thats not the problem.


Open the back of the camera.\012**** the camera as if you were advancing the film.\012While looking in the back, push the shutter release, like you were taking a photo.\012\012You see the mirror flip up and glimpse a flash of light as the camer ... Leica Digilux 2 Digital Camera

Error message- remove lens cap and press > button


Is your lens not retracting?I've got the same problem and with the lens not retracting - this is why i get the message. ... Panasonic Lumix DMC-FZ7 Digital Camera

D40X LCD Hi Dear Because of the removal of the control panel LCD the D40X uses the main LCD monitor for camera information display and the change of settings. By default this display is not shown, instead you press the 'info' button to show or hide it, you can optionally have the display on all the time. My question is: What i have to do for have the LCD always on. Thank you Quim


Return the control panel in order back to normal. ... Nikon D40x Digital Camera

Lens problem Zoom lens is stuck in ON position, and when I press Power button, screen reads, "Lens error, restart camera" accompanied by strange whirring sound from lens. Please help! On vacation, and photos are needed! Thanks.


The lens needs replacement.\015\012for reparing estimates cost of camera\015\012http://www.advancecamera.com/repair ... Canon PowerShot SD1000 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3854 seconds