Having problems with your Panasonic Lumix DMC-FZ20 Digital Camera ?

Hi I have a Panansonic Lumix - DMC-FS25. My camera has now developed a fault with the lens which won't go back in. When I turn it on the lens zooms all the way out and then back in again and a message appears saying - System Error (Zoom). Any help would be greatly appreciated, Many thanks Graham


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FZ20 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi I have a Panansonic Lumix - DMC-FS25. My camera has now developed a fault with the lens which won't go back in. When I turn it on the lens zooms all the way out and then back in again and a message appears saying - System Error (Zoom). Any help would be greatly appreciated, Many thanks Graham


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FZ20 Digital Camera

Upon trying to turn camera Panasonic DMC-ZS3 on, error message appears: system error (zoom). The lens comes out a bit and then goes back in, shutter closes, then lens comes out a bit again, then goes back in again ... then error message. Can you help? Thanks!


I don't know that I can help you fix it, but I can try.\012Here are my thoughts...\012Check the battery first. If it's like a normal battery, like AA or AAA batteries, replace them and try turning it on.\012\012If it's a flat lithium battery t ... Panasonic Lumix DMC-ZS3 Digital Camera

My camera felt in the sand, so only tiny particles entered to the eye. The zoom does not work when it is on, there is not a clear image. when I turn on the camera. its lens protection does not opens and a message appears saying that there is a system error (zoom) . What can I do to fix it ands not buy another camera.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-FS6 Digital Camera

My Nikon Coolpix S203 has a "lens error". Every time I turn on the camera, then lens goes crazy, moving in and out and zooming in and out of focus, all the while making a beeping noise. It then retracts back into the camera and the message "Lens error." appears on the screen. Please, is there anything I can do to fix this? Thank you.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Nikon Coolpix S203 Digital Camera

Lens Error Hi, When I turn on the camera, it says "Lens Error. Restart Camera." When you restart the camera, it gives you the same message. The Canon zoom lens will not go back into the camera. Help!


If you are sure that your battery is fully charged but still does not do any good, then do this little trick:1. Hold the camera on your right hand with the lens facing the ground.2. As you press the power on button, tap or hit ... Canon PowerShot A550 Digital Camera

When zooming, when it gets to 3x zoom, error message appears saying remove lens cap and turn camera on again. The lens cap is not attached.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic Lumix DMC-FZ7 Digital Camera

Have a Panasonic DMC-FS15 and get message saying "turn off and back on" followed by "system error (focus)" Have tried taking battery out for length of time and making sure charged, blew on connections for both battery & memory card - still get the same message, plus the lens goes in and out but doesn't go in when camera turned off.


I have this exact problem. I note, your issue is happening at the same time. Weird.\015\012\015\012Tried a variety of other "fixes" but none seemed to solve this issue. Thoughts?\015\012 ... Panasonic Lumix DMC-FS15 Digital Camera

My kodak easyshare MD853 digital 8.2 camera has some problems.. When I turn it on it says: lens error message 122,1,0,0 and the zoom will not retract back into the turn off position.. I called Kodak & it's still under warranty however they say if it's something that not under warranty they will charge me anyway... I bought insurance through Target as well & they referred me to kodak. Does anyone have any suggestions on how to fix my camera?


My camera i dropped it and it was off and i waiting a few minutes and then picked it up and tried to turn for a photoshoot and the dum camera wont work now it says a lens error and it wont come up or anything, so i dont know what i should do ... Digital Cameras

Lens error The lens on my Sanyo VPC-E760 will not close. I was not dropped, I was using it to take a picture and turned it off, but the lens never retracted. Now when I turn it back on, it is stuck in zoom mode and give an lens error message when I try to zoom back out, then it shuts itself off. Battery is fully charged. Any suggestions?


Hey jennbrady24,\015\012 What is most likely causing the lens error is that something is obstructing the movement of the lens (i.e. sand). I would first try removing the batteries and the memory card and waiting at le ... Digital Cameras

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

I have a Panasonic LUMIX DMC-ZS19 Digital Camera and the lens seems to be stuck. When I turn it on I get a message that says, "System Error (Zoom)." Any way to fix on my own?


Try these procedures: http://www.fixya.com/support/r13011856-lens_error ... Panasonic Lumix DMC-ZS19 Black

System error ya my digital camera coolpix 885 was just working fine,with no problems,then suddenly i tried zoom in and zoom out,took a picture,and the next moment i see all the images taken henceforth are blurred,tried everything clicking pictures with and without flash,zoom in and out and other things,it still does'nt work so i thought i ll switch it off n then restart and hell it gives an error message "system error". so as usual i removed my battery and replaced it back still it shows "syste


The following blog outlines some repair options for a lens error:\015\012\015\012http://camerarepair.blogspot.com/ ... Nikon Coolpix 3200 Digital Camera

System error ya my digital camera coolpix 885 was just working fine,with no problems,then suddenly i tried zoom in and zoom out,took a picture,and the next moment i see all the images taken henceforth are blurred,tried everything clicking pictures with and without flash,zoom in and out and other things,it still does'nt work so i thought i ll switch it off n then restart and hell it gives an error message "system error". so as usual i removed my battery and replaced it back still it shows "syste


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a pro ... Nikon Coolpix 885 Digital Camera

Lens error My Casio ex-z60 camara lens wont fully extend.When power is turned on, a clicking noise is heard. The LCD displays what will be captured, but is is blury. Then the lens closes and a "lens error" message apears on the LCD. Sometimes a message that says "retry power on" appears. Every thing else works fine. I am able to view my pictures .but I can not take any pictures.. Thank you


This is the lens focus gears. They are either knocked out of alignment, or debris has jammed them. The good news is it can be fixed....Casio most likely won't help. Hint...google my user name. ... Casio EXILIM ZOOM EX-Z60 Digital Camera

I have a cannon camera, my boyfriend dropped it with the lens extended and now whenever I try to turn it on I get a message saying that there is a lens error and the camera will shut down. I have tried a couple of answers on this website, but most have to do with a lens that is stuck out, mine will still retract back and forth if you smack it on your hand. My problem is when you power it off and back on the error shows up and the lens will not extend then. Any suggestions are greatly appreciate


... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

My coolpix s3000 says lens error when i try to zoom in. when it reachs a certain point the lens goes back in all by itself and says lens error. what's causing this problem?


Dirt, mishandling, fault hardware sensors, menu options, battery ... Digital Cameras

Olympus SP- 550 UZ , Model number Sp -550 UZ, L 08208054 UO 18x optical zoom - 28mm wide, Digital Camera DC 6V As soon as the power button is pressed, the screen lights up the lens comes out with a message "Zoom Error" and the lens immediately goes back into the camera. I can also hear light clicking sound as the lens goes back into the camera. This problem has been going on occasionally and then I could see the object to be photographed. Now for the last few days I am unable to take any pictur


... Olympus SP-550 UZ Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work. hi expert i m suffring in this error on my panasonic DMC-LC33 when i switched on


Try \015\012\015\012Klomtrix trick this worked with my camera\015\012thanks klomtrix ... Panasonic Lumix DMC-LC33 Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work.


*&%$@#%^&*&^% !!"It's working!!!!\015\012\015\012Turn your camera on and put it near your ear. Did you hear a softly motorized sound in the lenses area and the green LED is flashing? If you hear this sound do this.\015\012\015\012Do it under your own ... Panasonic Lumix DMC-LC33 Digital Camera

When ever I try to use the zoom button I get a message saying system error (zoom) I have also gotten a message that says Please turn off camera and turn on again... What is going on with my camera and what needs to happen to get it fixed!


When you first switch on the camera the lens will motor forward?\015\012\015\012If it does so then either the zoom control button is faulty or the control pcb \015\012\015\012If the lens does not move on first switch on then i ... Panasonic Lumix DMC-FZ28 Digital Camera

Lens error, restart camera telephoto lens is stuck in zoom position and won't retract, so when i turn on camera, screens says "lens error, restart camera", but it won't restart...just keep coming up with same error message


Hello mnickoliThis is a fairly common error especially with the A560.This either means that something is jamming the lens , or that the\015\012lens sensor is faulty. This is a very , if not the most common problem\015\012with modern digit ... Canon PowerShot A560 Digital Camera

Lens error When camera is turned on the lens will come out and then right away goes back in-an error message says lens error restart camera


Did you try replacing batteries.will it turn on long enough to restore it?if this is a new camera send it back it could be a software issue or mechanical breakage.Also get a can of air and blow the lens off to ensure no debris is ho ... Canon Powershot SX110 IS Digital Camera 9.0MP

On my Fuji s2000hd I have a zoom error, the screen is black and I can't take pictures. The lens will not zoom out. I believe that my husband put the lens cap back on before the lens had gone all the way in when he turned it off but I am not positive that is the problem. The lens seem centered and there doesn't appear to be anything blocking it from coming out. Is there a way to fix this?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S2000hd Digital Camera

I took my camera to the beach, took a picture and put it back in my bag. I then took the camera back out to take another picture the lens extended but then it went back in again it went to go back out but stopped and a loud beeping noise started and a message saying lens error restart camera. I don't know how to restart the camera and if that means turning it of then on it still doesn't work. What can I do now?


If your camera went into "standby" mode, the lens retracted and you may have thought it was off. You put it into the bag and slight pressure on a button reactivated it and the lens tried to come out but may have been prevented by something in the bag ... Canon PowerShot A480 Digital Camera

I have a fujifilm and took it on holiday with me in july this year, half way through the week an error came up saying 'zoom error' and the zoom lens goes straight back in after it comes out! this meant that i couldnt take any pictures. After a while it started working again and the error seemed to have disappeared! however this error has returned and it has been like this for nearly a week now and won't fix, is there a cheap and eays way to get it fixed as i dont have a lot of money and the came


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\012\01 ... Fuji FinePix Z2 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3567 seconds