Having problems with your Panasonic Lumix DMC-FZ28 Digital Camera ?

When I turn it on get message system error zoom. Can not do anything once I get this message.


Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair \012center for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope \012the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FZ28 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When I turn it on get message system error zoom. Can not do anything once I get this message.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a profess ... Panasonic Lumix DMC-FZ28 Digital Camera

ZOOM FROZEN HALF WAY OUT MESSAGE SYSTEM ERROR ZOOM DMC FZ28 while taking a picture & changing the zoom it just jammed and now I can only turn the camera on and off and view pictures on memory card. whenever I try to do anything I get the above message


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic Lumix DMC-FZ28 Digital Camera

Lumix DMC-ZR1 When I turn the camera on, I get a message telling me to turn it off and turn it on again. It does not focus, and the EZ zoom shows all the time whether I press the button or not. I also get a "system error ( focus) " message.


This is a lens mechanism fault. USe can of air and spray on surrounding the lens For cleaning the dust. and then try. ... Panasonic Lumix DMC-FZ28 Digital Camera

Have a Panasonic DMC-FS15 and get message saying "turn off and back on" followed by "system error (focus)" Have tried taking battery out for length of time and making sure charged, blew on connections for both battery & memory card - still get the same message, plus the lens goes in and out but doesn't go in when camera turned off.


I have this exact problem. I note, your issue is happening at the same time. Weird.\015\012\015\012Tried a variety of other "fixes" but none seemed to solve this issue. Thoughts?\015\012 ... Panasonic Lumix DMC-FS15 Digital Camera

When ever I try to use the zoom button I get a message saying system error (zoom) I have also gotten a message that says Please turn off camera and turn on again... What is going on with my camera and what needs to happen to get it fixed!


When you first switch on the camera the lens will motor forward?\015\012\015\012If it does so then either the zoom control button is faulty or the control pcb \015\012\015\012If the lens does not move on first switch on then i ... Panasonic Lumix DMC-FZ28 Digital Camera

When turning off the camera, the lens does not retract. I also get an error message "SYSTEM ERROR (ZOOM)" and another one "PLEASE TURN THE CAMERA OFF AND THEN ON". Once the camera is turned on, I can hear the lens mechanism working, but obviously failing.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic DMC-FX37 Digital Camera

Ok, I turned my Pink Coolpix digital camera (not 6 months old yet) on this morning, the lens was going in and out and the error message reads lens error! Can't get any further than that message. Anything I can do or is there something major wrong and have to take it to a repairer. Thanks, Coralie. I am at reception at work thus the different email address, please send help, or answer to my email address.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Nikon Digital Cameras

Ok, I turned my Pink Coolpix digital camera (not 6 months old yet) on this morning, the lens was going in and out and the error message reads lens error! Can't get any further than that message. Anything I can do or is there something major wrong and have to take it to a repairer. Thanks, Coralie. I am at reception at work thus the different email address, please send help, or answer to my email address.


My daughters Sony Cyber-Shot had the same trouble and I read that many times it is caused by foreign matter getting in the lens gearing. 1st ... Nikon Digital Cameras

I have a Revio KD-420Z. when i try to turn it on, the lens doesn't come out and I get a System error-message. Please help!! Much appreciated like this system error mfooc


... Konica Minolta DiMAGE E500 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

My Canon Powershot A560 memory card is locked and it is the camera doing it not the memory stick. When I turn on my camera I get an error message"memory card error" then when i press to view pictures it says the memory card is locked. i have switched the lock switch on the card, and it doesn't do anything, i have also tried formatting my card.


1 Turn the Canon Powershot A560 over so the bottom is facing up. 2 Locate the door on the bottom of the camera. The door is labeled "CARD/BATT. OPEN." 3 Place your thumb on the sl ... Canon PowerShot SD750 / IXUS 75 Digital Camera

My Panasonic Lumix DMC-FX150 is giving me a SYSTEM ERROR (FOCUS) message as of last night. It says, ''turn off the camera and turn on'' but of course that doesn't do anything. And I've removed the battery and put it back in, but that doesn't fix it. Any suggestions?


I'm not sure if you've gotten this resolved, you probably have - however, others will find this useful. When I left my memory card out the camera worked fine but when I would insert the memory card again, poof: "SYSTEM ERROR (FOCUS)." You can take yo ... Digital Cameras

My panasonic dmc zs5 dont work. When I turn the camera on I get this message, the camera will not work, and the lens does not retract when I turn the camera off. it then says system error focus. What is wrong ? The camera is from August so its not old.


... Panasonic Lumix DMC-FZ28 Digital Camera

I have a cyber shot DSC-S80 which has been working fine for ages. However I deleted some photos from the memory stick whilst it was in my computer and now I get the 'memory stick error' message flashing everytime I turn the camera on with it in. It works fine in the computer still. Is there a way round this problem? Tried checking for errors with the windows system of my laptop and says there are not any.


Try to format memory stick with the camera's facilities. Maybe the camera doesn't recognize the stick.\012\012\012You can try another memory stick to know exactly what it happened. ... Sony Cyber-Shot DSC-S80 Digital Camera

When I turn the camera on in either record or review mode I get a system error: zoom message after a few seconds and the camera is inoperable. Then when I turn the camera off the lens does not retract.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by ... Panasonic Lumix DMC-FZ28 Digital Camera

I too have the same problem with my DMC-FS15:- When I turn the camera on in either record or review mode, I get a system error: zoom message after a few seconds, and the camera is inoperable. Then when I turn the camera off, the lens does not retract. Is there updated software that can be downloaded and installed via the supplied USB cable, or any other fix? Regards Martin J


Well perhaps it is just the battery I wonder if this problem isn't simple a bad battery try a replacement, as sometimes they just go bad, and this is indeed a symptom of a battery not working properly. If you have an original power supply, then try i ... Panasonic Lumix DMC-FZ28 Digital Camera

I have a SONY Cybershot DSC W150. When I turn it on the lens goes kut and comes back in several times, then I get the error message "Turn the Power Off and On Again", but doing that does not change anything. This is one of four digicams I own (also a Nikon D90, SONY DSC F717, and a Canon) and I like the W150 for some purposes because it is compact and has a viewfinder, not just a screen. I have been unable to find a similar camera. What can I do to fix the problem? Gerry Meisels [email protected]


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\01 ... Agfa Cyber-shot DSC-W150 Digital Camera

I have a fuji finepix S5100. Sometimes when I turn on the camera the lens won't move and I get a zoom error message. This morning when I turned on the camera the camera can on as it should but the lens makes a clicking noise that it didn't used too. Can this be fixed? My husband is not afraid to tear into anything, if he just had some direction.


Hi.This is a common problem , generally indicated as lens error. The problem is often caused by dirt or dust in the lens gearsPossible reasons are :* Faulty lens mechanism or jammed lens (camera usually turns off b ... Digital Cameras

When I turn on my Nikon D40 with the 18-55 mm lens set to autofocus I get an error message "Error. Turn Camera off and then on again." If I turn the lens switch to manual, I do not get the error. If I attache my 70-300 mm lens, I get the error regardless of the lens focus switch psition. I have just upgraded the firmware with no improvement.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

I have a Nikon S6 digital camera, everything about the camera seems to work fine, except for this "lens error" message I keep getting. Sometimes I'll turn it on, and I can use it just fine. But then there are other times where I have to turn it off and on in order to get it to work. And then there are those times where turning it off and on don't help. I usually give up and try again later. Sometimes it'll still give that error message, and other times, it will just work like normal. What can


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon COOLPIX S6 Digital Camera

Error Message Hello! Every time I turn My Sony camera on it starts beeping and and giving me the error message "Turn the power off and on again." I've tried turning it off and back on, along with taking the battery out and putting it back in and even pressing the reset button and I'm still continuing to get the same error message. Any ideas on what I can try next?


I have the same problem ... Sony Cyber-Shot DSC-L1 Digital Camera

Not a problem with the camera but the Samsung Master photo editor that came with it . Been working great for two years but now when I edit a pic and try to close it and select another I get an error message "Other system is busy" . Gives me the option to "switch to " or "retry" but neither option does anything . Tried uninstalling and reinstalling but it didn't help .


Sounds like a computer problem....for example, insufficient RAM. ... Samsung BL103 Digital Camera

When I turn on my camera I get a "System Error (O.I.S.)" message displayed


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-ZS3 Digital Camera

Nikon Coolpix 775 - When I turn it on, I get a message "System error". Nothing will function. Any ideas?


\015\012Use the memory card that originally came with the camera (or a Nikon approved card) \015\012Remove and replace the battery \015\012if it's still the same you need to contact nikkon's service dep ... Digital Cameras

Casio ex-z40 When i turn the camera on i get a message that reads SYSTEM ERROR (OeO1) Help please


System error (0e01) ... Casio Exilim EX-Z40 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3897 seconds