Having problems with your Panasonic Lumix DMC-FZ28 Digital Camera ?

I have the same camera with the same error message, what is the solution? I can't see it her, just to clarify its a panasonic lumix dmc-fs15 with a system error zoom as soon as I turn it on?? It is a beautiful camera but it has only lasted me a week:(


Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair \012center for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope \012the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FZ28 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have the same camera with the same error message, what is the solution? I can't see it her, just to clarify its a panasonic lumix dmc-fs15 with a system error zoom as soon as I turn it on?? It is a beautiful camera but it has only lasted me a week:(


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a profess ... Panasonic Lumix DMC-FZ28 Digital Camera

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

Just purchased an powershot SX1 IS. I took one photo, zoomed in on it to see how clear the zoom was once taken a photo. THen it switched itself of with the lens still out. Now when turning it on it has a black screen and say lens error...restart camera. I have tried holding func. when turning on the camera and the time comes up on the screen. But as soon as I let go of func I get the error msg.


Hello if you just purchased this unit Then i advise you to take it back, this sounds like a system control issue or main board problem. Holding the function key while turning is factory reset, if this is not working right them the camera has a bad sy ... Canon PowerShot SX1 IS Digital Camera

When turning off the camera, the lens does not retract. I also get an error message "SYSTEM ERROR (ZOOM)" and another one "PLEASE TURN THE CAMERA OFF AND THEN ON". Once the camera is turned on, I can hear the lens mechanism working, but obviously failing.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic DMC-FX37 Digital Camera

When i turn on my camera it zooms in and out over and over never focusing and then displays the message ''PLEASE TURN CAMERA OFF AND THEN ON AGAIN''. When i do this it repeats the smae thing evey time i turn the camera on. AND IT HAS THE ERRORS SYSTEM ERROR FOCUS


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic Lumix DMC-FX7 Digital Camera

Zoom error showing on display screen of my daughters fuji finepix f40fd digital camera. Unable to press button to take photos and when I try to turn camera off the zoom lens goes in and out twice before turning off. Help - my daughter goes on holiday next week and needs her camera!


The lens Is trying to close properly but the focus mechanism has a problem, most likely jammed, so the lens cannot correctly close or work properly.\015\012It will need to be opened up and reset.\015\012Please email me. My email address i ... Fuji FinePix F40fd Digital Camera

At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retracts and the camera terns off. i tried to connect with computer and scan for virous, but, when i connect the USB and turn on the camera, the lense retract and tourn off the camera indicating system error 0030.


Hi and welcome to FixYa,Initially, a few ideas you may want to consider:\015\012\015\012ensure that both the built-in 13Mb and the SD memory card are formatted through the camera's features/options ... Digital Cameras

At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retracts and the camera terns off. i tried to connect with computer and scan for virous, but, when i connect the USB and turn on the camera, the lense retract and tourn off the camera indicating system error 0030.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... BenQ DC E610 Digital Camera

Zoom Error My Fujifilm Finepix 515000 will not close the lense. When I turn it on it says zoom error. The camera will not allow me to take photos. Other than that the phone still works. I can still change mode and setings and view previously taken photos. I bought this camera just a little more than a week ago. What can I do to fix this?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have ... Pix FUJIFILM Fine S1500fd Digital Camera

When ever I try to use the zoom button I get a message saying system error (zoom) I have also gotten a message that says Please turn off camera and turn on again... What is going on with my camera and what needs to happen to get it fixed!


When you first switch on the camera the lens will motor forward?\015\012\015\012If it does so then either the zoom control button is faulty or the control pcb \015\012\015\012If the lens does not move on first switch on then i ... Panasonic Lumix DMC-FZ28 Digital Camera

My camera felt in the sand, so only tiny particles entered to the eye. The zoom does not work when it is on, there is not a clear image. when I turn on the camera. its lens protection does not opens and a message appears saying that there is a system error (zoom) . What can I do to fix it ands not buy another camera.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-FS6 Digital Camera

When I turn the camera on in either record or review mode I get a system error: zoom message after a few seconds and the camera is inoperable. Then when I turn the camera off the lens does not retract.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by ... Panasonic Lumix DMC-FZ28 Digital Camera

I too have the same problem with my DMC-FS15:- When I turn the camera on in either record or review mode, I get a system error: zoom message after a few seconds, and the camera is inoperable. Then when I turn the camera off, the lens does not retract. Is there updated software that can be downloaded and installed via the supplied USB cable, or any other fix? Regards Martin J


Well perhaps it is just the battery I wonder if this problem isn't simple a bad battery try a replacement, as sometimes they just go bad, and this is indeed a symptom of a battery not working properly. If you have an original power supply, then try i ... Panasonic Lumix DMC-FZ28 Digital Camera

Zoom problem The camera I have don't allow the zoom to come out, when I turn camera on it says "zoom error" and then I can't do nothing on camera,not even look at pics I have taken. It does it alot, sometimes the camera will turn on without saying it,but it's very rare. And sometimes I can turn it on and it will say "zoom error" but if I press zoom in the camera will work. But it's very rare that it works. I love the camera and hope there is a solution.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Zoom DualCam 1300 (1599) Digital Camera

My new panasonic lumixDMC-ZS8 14.1MP Digital camera gives me system error (zoom) when I turn it on.the lens will not open?


The systems control board has detected a fault wth the lens, over time dirt and grime collect in the len causing havoc, the other concern is the gears have jammed or got damaged, either way it is a major dis-assembly and it will be expensive. ... Panasonic Digital Cameras

When I try to zoom in on my camera (a Sanyo VPC-E1090), it says "Lens Error: 0x2119" It used to say something similar to this when I turned it on, but I turned it off and on many times until it corrected it. But I don't know how to correct this problem or if it can be corrected. For background information, the camera is only a couple weeks old, and it has been mainly used at a camp and ranch where it is quite dusty. Thanks for the help.


... Sanyo Digital Cameras

Lens error message on nikon coolpix L18 I purchased my Nikon L18 Cool Pix camera last September ('08). Last week when I turned it on, the lens extended fully, then retracted fully as I got a "lens error" message.'' PLEASE HELP! I don't want to replace this camera so soon.


Hi,When system control does not get lens initialize signal while extending it, then it try again by folding it and extending and still no required initialize signal then generate error and stop further functions.Please remove batter ... Nikon COOLPIX L18 Digital Camera

Zoom error when i turn on my camera zoom error msg will shown,and i cannot take picture,i bought it new on circuitcity at 26/05/2008.i have my one year warranty card and original bill.plz help me out of this prob as soon as possible.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S7000 Digital Camera

Hello, I have 2 problems with my Panasonic Lumix DMC-FS4 Digital Camera. Firstly, at the lower left corner of my screen, there is a dark shade. So in all my pics, there is sth black on the lower left corner. Secondly, I can't zoom to the maximum, it says "turn off the camera" or " system error (Zoom)". Any help will be highly appreciated. Thxs :)


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-FS4 Digital Camera

Zoom error I turned my F470 camera on and received a "zoom error" bar across the screen. The lense does not move outwards after I turn the power on, nor does the plastic sliding screen close when I turn the camera off. The lense is exposed whether or not the camera is on or off. The lense does not make any sounds when I turn the camera on, but I hear (what I think) are the gears when I turn the camera off. When the camera is on, the screen is working, but the image is blurry. I tried other poste


Hey MBB722,\015\012 What is most likely going on is there is something stuck in the lens obstructing its movement (i.e. sand). I don't know what you have tried and what you have not tried you can try placing the came ... Fuji FinePix F470 Digital Camera

Lumix DMC-FH5/DMC-FS18 - My camera says system Error (zoom) when I turn it on - what does this mean?


Gerrting a message system erroe (zoom) ... Panasonic Lumix DMC-FH5 / DMC-FS18 Digital Camera

Lumix DMC-ZR1 When I turn the camera on, I get a message telling me to turn it off and turn it on again. It does not focus, and the EZ zoom shows all the time whether I press the button or not. I also get a "system error ( focus) " message.


This is a lens mechanism fault. USe can of air and spray on surrounding the lens For cleaning the dust. and then try. ... Panasonic Lumix DMC-FZ28 Digital Camera

ZOOM FROZEN HALF WAY OUT MESSAGE SYSTEM ERROR ZOOM DMC FZ28 while taking a picture & changing the zoom it just jammed and now I can only turn the camera on and off and view pictures on memory card. whenever I try to do anything I get the above message


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic Lumix DMC-FZ28 Digital Camera

Upon trying to turn camera Panasonic DMC-ZS3 on, error message appears: system error (zoom). The lens comes out a bit and then goes back in, shutter closes, then lens comes out a bit again, then goes back in again ... then error message. Can you help? Thanks!


I don't know that I can help you fix it, but I can try.\012Here are my thoughts...\012Check the battery first. If it's like a normal battery, like AA or AAA batteries, replace them and try turning it on.\012\012If it's a flat lithium battery t ... Panasonic Lumix DMC-ZS3 Digital Camera

I have a sp-560uz and when i turn on my camera, zoom error comes on and my camera turns off. I put brand new batteries and it worked for a while then zoom error comes on. i put some more batteries took a picture, turned it off and when i put it back on zoom error came back on.


Try the procedures in this tip. ... Olympus Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6381 seconds