Having problems with your Panasonic Lumix DMC-FZ30 Digital Camera ?

Accidentally dropped my Lumix FX520 on a hard wood floor and the lens is stuck out. now the lens won't even move no matter the power is on or off! can i fix it or should i give it up?


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FZ30 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Accidentally dropped my Lumix FX520 on a hard wood floor and the lens is stuck out. now the lens won't even move no matter the power is on or off! can i fix it or should i give it up?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FZ30 Digital Camera

I can't turn my camera on,I press the power button,it gives me a whirling noise,the lenses come out(but not all the way),the picture on the screen is blurry,and I can't make a shot,and after2 seconds the lenses come back in by itself.Then it does it again,without me even pressing any button!But I can still view my pictures.But I can't download them on computer,because it still displays an error message D: 5fo8 5e02,and the lenses start moving again.I don't know how to fix it.Please help me.Becau


The camera may be faulty or it needs to be reset to the factory settings.\015\012Try removing the battery leave it out for at least 1/2 hour, then replace the battery.\015\012If it doesn't work then you need a new camera. ... Olympus Stylus 700 / 700 Digital Camera

Lens Error Hi, My camera PENTAX optio60 is giving me a lens error (even though I haven't dropped it or damaged it). So, please give me some suggestions to fix it. I am already out of the warranty period. Thanks Pooja


Try the procedures in this tip. ... Pentax Optio 60 Digital Camera

I have a Sony Cybershot DSC W100. I accidentally dropped it and now it says 'Access' and the lens opens and closes three times then beeps and says, 'Turn the power off and on again'. I have done this and it still doesn't work. I tried to initialize the settings - that didn't work either. I even played around with the lens some, and that didn't fix it. If you have any other suggestions please help! I would hate to have to pay $130 bucks to have it fixed.


They are trying to say that you may need to open the camera and check and clean the lens, because there's a big possibility that the lens is misaligned or worse its bad already and needs a replacement...Good luck......... ... Sony Digital Cameras

Lens error. On power up, lens moves forward and backward but does not focus properly, and then camera gives the display 'Lens error'. Appears to be an electronic autofocus problem, rather than lens motor jamming due to grit etc. No unusual noise, anyway, from motors.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon Coolpix S210 Digital Camera

Lens Error! I dropped my camera on the floor, and now the lens wont open fully or close. The LCD says "lens error,restart camera." But even when I turn the camera off, it still happens. Its a Canon Power Shot A550. I need to find out how to fix my camera without breaking it some more.


Same problem. The lens is stuck in the zoom position. When the camera is turned on, the lens moves a just afraction like it want to fully open or close, then the camera beeps and prompts with the "Lens Error" Restart Camera. Solutions? ... Canon PowerShot A550 Digital Camera

I have a panasonic lumix dmc-fz7. the zoom lens no longers adjust even though it moves when powering on and off. the button used to move the zooms works to move between pictures. the camera has not been dropped or gotten wet


After a bit of research i powered off the camera removed the battery and powered it on. i then recet the it to the factory defaults and it worked fine again. ... Panasonic Digital Cameras

I dropped my JD DIGITAL 5.0z3C and the zoom lens got out of its original position such that it can not move when camera is powered on.when i power on the camera,it does not display any thing.how do i fix this problem?


... Jenoptik Digital Cameras

Stuck Lens I fell on my camera just recently and the lens is stuck open half way. When you power it on it moves a bit to the side and up, then to the other side and up and then beeps couple of times. You can view all the pictures and see the opening screen when you turn it on on picture-taking mode but it won't open up completely. Is it possible to fix? If so how?


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot SD400 / IXUS 50 Digital Camera

I dropped my camera on concrete and whenever i turn it on, it says "lens error" and is not working at all. The lens won't even move when i turn it on and off. Any idea on how to fix it?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... GE J1455 Digital Camera

Stuck Lens My 4 year old got a hold of my Konica Minolta Dimage G6000 and now my lens is stuck half way out. It will not move in or out. When it powers on I get "system error S0042." As I do not have a lot of money I am tempted to take it apart and see if I can fix it, but I don't want to make any problem worse. Any suggestions? Thanks, Todd.


If you have recently dropped the camera you may have damaged the lens\015\012tube (housing). This damage will prevent the lens from moving properly\015\012and will cause the camera to shut itself off after a few seconds. If\015\012the lens is damag ... Panasonic Lumix DMC-LZ2 Digital Camera

I have a kodak m320 camera and it is stuck in the on position with the lens still stuck out, the camera wont power on,( even with a charged battery and while on the power adapter) so can anyone help me fix this issue?


Thing that needs to happen is for the lens to be taken apart and then realigned back into place so that way as you turn on your camera the leneses opens up and then the leneses closes as you power down the camera. Precision Camera is a p ... Digital Cameras

Today i went to a beach nad my camera fell in the sand. After taken it out when i switch on, the lens does not move at all. It is stucked because of sand and on the screen it says "lens error, restart the camera". So in order to get it fix, what should i do? for information, i bought it from best buy in houston last thanks giving.


Sorry to hear that shivamfc. You are an unfortunate Canon user with the unlucky results of digital camera + sand = dead.To make the camera to work again, you need to be sure to remove the sand that got inside the lens mechanism, unfortun ... Canon PowerShot SD880 IS Digital Camera

When powered on, lens system makes noise, doesn't move


As an experienced eBay seller, I have sold many broken items over the past ten years. They sell well and it's truly better than having them just sit there and taunt you. If the owner doesn't mind, listing it on eBay to recoup some of the money is ... Praktica Luxmedia 5203 Digital Camera

Hi! My Powershot s200 powers up and the lens moves, the pre-flash lights but the screen stay black and it won't take pictures. I like this camera and want to fix, not replace it.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... Canon PowerShot S200 / IXUS 178 Digital Camera

I have a Finepix S7000. This camera has been great for the entire time I have had it. Suddenly a day ago, I turn it on and it pretends to "Boot" up....the display comes on with the "Finepix" graphic...the lens "Moves" into position....the "Green" power light on the right grip side come on, (and stays on)....then, Nothing. When I try to turn it off and restart...nothing. The camera will not even turn "off" unless I open the battery hatch, (I put a fresh set in). Please help...I love this camera.


Hello thomas... remove the new batteries and then use the eraser end of a pencil to clean the battery contacts within the battery compartment of the camera. remove all of the eraser debris. reinsert the new batteries and try it again.\015\012 ... Fuji FinePix S7000 Digital Camera

My Canon A520 sometime, don't power on ONLY WITH OUT the memory card, so say, the camera function perfectly without the memory card, but, off coarse that model don't have an internal memory so, she is useless with out a memory card, I fix it (by now?!) taking off the internal battery and zeroing all sets, but I'm not sure if that my attitude (or his success) was entirely a matter of luck (episodic, sporadic, occasional etc...even superstitious!) By now my Camera is O.K, but I don't believe in h


You can get a newer model ... Canon PowerShot A520 Digital Camera

My Nikon Coolpix S210 is giving a Lens Error message and will not focus or stay on for more than a few seconds. I cannot get to the menu even to try to fix it that way. Any ideas?


I have set the 8meg as default , but I can;t seem to record any pics above 1.5mb ... Am I missing something ?? ... Digital Cameras

Problematic Camera I have a EasyShare DX4530 which has suddenly started acting funny. Here's the sequence of events: - power up works fine - lens comes out ok - green light glows steady, ready for a picture - picture takes fine - green light doesn't turn on again - no amount of pressing the shutter button will bring the green ready light back - pressing the SHARE button a couple times (sometimes 2, 3, even 4 times) will move thru the share sequence and then finally exit that function, turning


I just discovered that the real problem is a STICKY SHUTTER BUTTON, staying down after taking a picture. This prevents the green ready light from coming on until I jiggle the shutter button. It has actually started to be hard to press, making a defin ... Kodak EasyShare DX4530 Digital Camera

Flash broken,lens stuck i turn it on and the camera clicks and it sounds like the lens is detached from what useed to move it. its says "acess" then black screen then "Turn power off and on." i think its forever broken.. :( flash broken,lens stuck i turn it on and the camera clicks and it sounds like the lens is detached from what useed to move it. its says "acess" then black screen then "Turn power off and on." i think its forever broken.. :(


I have the same problem...so do you think that it's so expencive to repair?? ... Sony Cyber-shot DSC-W55 Digital Camera

Lens Error I have a Nikon Coolpix S210 too. And when i turn it on the lens won't even open and it makes the same weird noise like its trying to open but somethings stopping it from opening, I CAN"T STAND broken electronics! because i can never fix them. i tried taking out the battery and memory card too. i even waited a few days just for it to take a break and maybe fix itself but nadaa! it sucks idk i guess the next thing to do is to take it apart somehow??? fml.


Try the procedures in this tip. ... Nikon Coolpix S210 Digital Camera

Powers up, lens doesn't move, shows error MF00C and shuts down.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Konica Minolta DiMAGE G400 Digital Camera

I dropped my Kodak EasyShare C330 when the lens was out and now I'm getting the error messages 12 & 22. I tried pulling out the lens because it was stuck and it caused the lens to now move around in the socket. The front part of the lens is also a little bit detached. I was wondering if there was anyway to fix this problem without having to pay for a repair shop or Kodak to fix it?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Kodak EasyShare C330 Digital Camera

The gears seem to be frozen. the lens wont move in or out by self and when turned on screen displays turn cam off the back on? If you get the lens out or push it back in, in wont move back into the other position by itself. it doesnt even make any sounds like its trying to move


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FX50 Digital Camera

Zoom will not go back when i power off, comes up zoom error My Olympus Stylus 830 does the same thing. Power it off, the zoom lens doesn't retract, and the camera won't fit in it's case. Power it back on, the zoom lens retracts briefly, and then expands again. I figure it's hosed. Any chance for a low cost fix?


Its better take it to the technician because the motor sensor that gives signal for closing the zoom lens are not working ... Olympus Stylus 830 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2579 seconds