Having problems with your Panasonic Lumix DMC-FZ7 Digital Camera ?

Recently, on the standard mode, the images are blue, whereas if I immediately change to simple mode, the image is perfect. Is this a fault, or have I changed some setting by mistake?


Answers :

You may have changed the white balance. Check it and set it to auto white balance.
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FZ7 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Recently, on the standard mode, the images are blue, whereas if I immediately change to simple mode, the image is perfect. Is this a fault, or have I changed some setting by mistake?


You may have changed the white balance. Check it and set it to auto white balance. ... Panasonic Lumix DMC-FZ7 Digital Camera

Dark Images At some point, the images from the camera became very dark in automatic mode. Previous to that, the images were perfect. I have checked all settings many times and changed back to default settings. Nothing has seemed to work other than to change mode to "P" and set for extra exposure. Thanks.


Even in automatic mode, camera still lets you pick what ISO to use. If ISO-Auto is OFF in camera menus, this can give some dark images. Press and hold ISO button and rotate command dial to give a higher ISO, or turn ISO-Auto on in camera menu with cr ... Nikon D40x Digital Camera

Forgets settings My optio s40 worked well until just after the warranty expired. Then it started acting up. It maintains the default settings in auto mode. It allows me to change them, but when I shut it off and power up again, it has returned to the default settings. In Pict mode, it maintains EV +1, AWB as flourescent lighting and image size as one higher than the smallest size. Again, I can change the settings, but when I shut it off and power up again, these are the settings it has. Any idea


I had the same problem. Pentax told me to format the memory inside the camera (take out the memory stick and camera will be set to camera memory). This works! (though i have to do it approx every 200pics, the problem keeps coming back!) ... Pentax Optio S40 Digital Camera

Why is my olympus e420 taking green tinted photos? I bought a new camera which I received yesterday, and it was until earlier, but has suddenly started taking yellowy/greeny tinted images. I've tried changing the settings, I've changed the camera modes, I reset the settings altogether and even changed lenses and yet the camera still takes tinted pictures, inside and outside. Also, when I switch the camera to live-view mode (shows exactly what the lens sees) it shows pretty much an entire green s


Im having this same problem. I have yet gotten it solved.. have you fixed it yet? ... Olympus E-420 Digital Camera

I have just bought a Lumix FZ18 camera (July 08). It worked perfectly on all settings at first, but has now developed an apparent fault in which it shows an overexposed image on all settings apart from automatic. When the shutter button is partially depressed, the image in the viewfinder or on the screen shows as normal, but when the shutter is activated it immediately reverts to over-exposed and the resulting image is the same. Can you advise please


Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. Fix #2: Remove the bat ... Panasonic Digital Cameras

I think it is possible I have inadvertently changed a setting. I use this camera daily to document construction projects. The HP PB360t has always performed perfectly until the last time and now all the pictures are comming out completely overexposed. It is hard to see any details of the image at all. I have tried in low light levels and the images are coming out at all but, poorly. I have experimented in vein with settings. As much as I use the camera I rarely adjust any settings, don't kn


Welcome to Fixya.\015\012\015\012I suggest to you have to reset all the factory settings of your camera. As you said you can used it and the result are perfect. After that if you still not staisfied with the outcome of the pictures that's ... Digital Cameras

I mostly just veiw pictures on my computer and send them via email. The image mode on my camera is set at 4000 X 3000.Which is a size problem when I go to email them . Should I change the setting down on my camera or make that change later after I load them on the computer. Jeff


Always shoot at the largest size your camera can handle. When it's time to e-mail, just right-click on the picture file and from the menu that pops up, choose e-mail recipient. Another dialogue box will open up and give you the choice to send large, ... Nikon Coolpix S3000 Digital Camera

Help No image in the viewfinder or on the lcd screen when in shooting mode. Have amber light rather than green. In playback mode images appear on lcd screen. Was working fine the last time I used it and have changed the batteries to newly charged. Have also reset to default settings.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot S1 IS Digital Camera

MVC-FD71 Question I have a MVC-FD71 and would like to know what is the neg. art setting in the picture perfect mode. Can I print a picture that was taken in that mode by mistake. Thanks for the reply. -- Lou Spada


I have heard that there is actually a visible difference between pictures taken in regular mode and pictures taken in Neg Art mode and then reversed in software. Most editing software will have a negative effect that will reverse the picture. ... Sony Mavica MVC-FD71 Digital Camera

MVC-FD71 Question I have a MVC-FD71 and would like to know what is the neg. art setting in the picture perfect mode. Can I print a picture that was taken in that mode by mistake. Thanks for the reply. -- Lou Spada


I have heard that there is actually a visible difference between pictures taken in regular mode and pictures taken in Neg Art mode and then reversed in software. Most editing software will have a negative effect that will reverse the picture. ... Sony Mavica MVC-FD71 Digital Camera

Powershot SD1000 Cannot get an image on the LCD Monitor while in camera mode but previous pictures can be viewed normally. Other functions of the camera appear to work properly. I replaced battery--no change. I feel it may be a setting issue but I really don't know. Is there a way to default the settings?


HI there when you go for click the image that time on your LCD screen. Right now its off and its in viewfinder mode. So press the switch for LCD on so , you can see the image in LCD in camera mode. Thanks. ... Canon PowerShot SD1000 Digital Camera

Blurry Pictures When we first bought this camera it worked perfectly almost everytime. However lately, there are so many blurry pictures, even when I'm taking still object and with tripod. We have set the Stabilizer to Mode 2 , is there any other setting that we have to change ?


I had the same problem with blurry pictures, and unable to focus. then i discvered i had accidentally switched to manual focus. I switched back to auto, and no more blur. ... Panasonic Lumix DMC-FZ20 Digital Camera

I have a nikon d200. The last time I used it (only a few days ago) it was fine, everything normal. Then yesterday I pull out out of the case and everything seems to be going wrong. It is metering INSANELY low, like a shutter speed of 100 in full daylight produces a REALLY dark image. It won't auto focus at all, and i am unable to change the fstop in manual or aperture priority modes. I tried to restore it to factory settings and the lcd screen flashed to indicate it had been restored but no luck


Your boyfriend is probably right, and it makes sense, if you can't change the f-stops. \015\012The following blog on Flickr might help you:\015\012 ... Nikon D200 Body Only Digital Camera

Autofocus on panasonic DMC-TZ3 fault. rarely autofocuses, tried in all modes and with all settings. Additionally, quality of images taken is very poor - even when it 'thinks' it has focussed.


\015\012Try using the auto intelligent mode on the camera.\015\012Ensure that it is not in 'Macro' mode.This is used to take close ups (3-10cm in range)\015\012Ensure ... Digital Cameras

I have an ist D L. I would like not to use the viewfinder to take pictures , rather the LCD monitor, but the images I focus on does not appear on the monitor. Is there a setting I can change to enable me to do this? (Playback working perfectly)


Sorry, that is not possible with this camera as it sies nit have "live view" ... Pentax *ist DL Digital Camera

I have a Sony Cyber-shot DSC-W90. When I try to change the flash settings, a notification pops up on the screen saying, "Flash settings cannot be changed." I tried setting it in each mode (including Auto) and trying to change the flash from there, but it won't let me. How do you unlock the flash settings? Thank you.


Go to Menu/ Home and initialize camera to reset it for factory default settings to fix flash light settings bug.If problem still not solved, let me know do you see any error code flashing in top right corner of lcd? ... Sony Cyber-shot DSC-W90 Digital Camera

I'm having problems with the settings on my Canon EOS 400D. When I take pictures in AV mode I can get quality pictures but in TV or M modes the pictures always come out so dark even when taking them outside in daylight. They are not coming back with a completely blank screen as I can see the outlines of the image. Even when I try different settings nothing improves the image.


You need to understand the relationship and teractivity of aperture, shutter speed and iso. In Av mod, you choose the aperture and the camera makes thw shutter speed agjustment, In Tv mode, you set the shutter speed and the camera makes the aperture ... Canon EOS 400D / Rebel XTi Digital Camera

Blurry pictures Using a point and shoot digital camera, it was set on night mode by mistake. Pictures turned out blurry. The snapshots were taken inside at night using flash in the camera. Probably because in night mode, camera was setting depth of field wrong. So using flash and set in night mode was the problem. But can anything be done to correct the blurry pictures taken in this situation?? Any software known to correct this problem? Thank's, Angela Sapp


Adobe photoshop might help. ... Casio Exilim EX-S600 Digital Camera

My Panasonic DMC-TZ3 in any shooting mode produces the following both on the screen and in a captured image: a blurry, snowy, magenta-tinted (visual noise?) presentation. At one point, it produced several normal images, then returned to the problem. The playback mode produces normal images from sored normal images. I have never dropped the camera or exposed it to high heat or cold. I have 3 batteries and none produce any variance in the bad image. I've tied all settings and reset. Up until the


The problem you have mentioned is definitely a case of image sensor malfunction since the distortions are appearing in the pictures too. Getting the imagesensor replaced is the only way to fix this problem. ... Panasonic Lumix DMC-TZ3 Digital Camera

The flash on my Nikon D3000 won't pop up (regardless of the setting) and when I go into "Shoot" (from the guide menue) and then into "Easy Operation" the camera is set at No Flash but I'm not given the option to change the setting and says "The camera is now on "Auto No Flash Mode" but doesn't give me an option to change the setting there either. Can you help?


... Nikon D3000 Digital Camera

Mode switch The mode switch will not switch to viewfinder mode which I prefer. Playback mode is OK. Also, indoor pictures have a yellow cast in the background. Is this a matter of changing the ISO setting and will that be a permanent change?


I have the Dimage Z 1 that had the same viewfinder problem. It was stuck and I could not use the small viewfinder. I couldnt hear any loose parts so after looking at a diagram of the viewfinder I turned the camera upside down, shook it and thumped it ... Konica Minolta DiMAGE Z1 Digital Camera

Canon Ixus 900 Ti - image quality we seem to have changed a setting which now gives poor image quality when downloaded - the image is blurred and not sharp. how do we change this back?


As I'm not sure which setting you have changed right now, go ahead and do a full settings reset.\015\012\015\012 ... Canon Digital SD900 / IXUS 900 Ti Digital Camera

I HAVE A GR2 DIGITAL CAMERA. I usually shoot in manual mode and and set white balance manually using a digital callabration target. Yesterday afternoon, after shooting most of theday without problems, my images started appearing completely washed out with an orange cast. This cast also was all over my calibration target image. The image was unclear with stripes running horizontally across my display. This problem is present in all modes. Itried everything I could think of to resolve the matter


I doubt that formatting the card will do anything but, if you choose to do that, download any pics first since formatting will completely erase the card. Have you tried going back to "Auto WB" to see if your camera works properly that way? How about ... Ricoh GR Digital Camera

My canon EOS 350D wont work in auto mode. It wont autofocus at all in any mode and it wont take pictures in auto mode when the AF is on. Changed the CF/battery/ reset factory settings etc. Still no change!


Try cleaning the contacts on the lens and the camera body where they meet with a cotton swab lightly dampened with rubbing alcohol. ... Canon Rebel XT / EOS 350D Digital Camera

Hi I have a Canon PowerShot A460 and normally do notn have any problems at all. For the last few hours I cannot take any photos outside - all I get is a white screen. I can however take photos inside with the Flash. I realise that I have possibly changed some settings by mistake and have tried to set the camera to works settings but nothing has changed - I still cannot take photos. Can someone help me please??


Go into the menu and find "reset"...this will restore the original factory default settings and may solve your problem. ... Canon PowerShot A460 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1515 seconds