Having problems with your Panasonic Lumix DMC-FZ7 Digital Camera ?

Lumix camera keeps saying please turn camera off and t hen on again


Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope\012 \012the advise is useful. please do not hesitate to let me know if you need \012any further assistance. Also, please be so kind to let me know if you \012found this helpful.

Regards
Andrea
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-FZ7 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lumix camera keeps saying please turn camera off and t hen on again


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Panasonic Lumix DMC-FZ7 Digital Camera

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.


Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

When I turn my panasonic lumix tz3 on to take a photo, it struggles to focus and then says 'please turn camera off and then on again'. I do that but it just keeps saying the same thing. Anything I can do??


The problem is in the mechanical part of the lens housing, the motor that extends and retracts the lens is slowly seizing up, or the gears have ware and tare, or they need lubrication. This is a delicate job that require a camera technician to remedy ... Panasonic Lumix DMC-TZ3 Digital Camera

There are several problems with my camera one of them is the fact in that Every time i turn on my Lumix 10x mega pixel camera the lens won't focus it also won't let me take any pictures. When i turn the camera off the lens won't go back into the camera but when i turn it back on the lens gos in and then out again. There is one more problem whenever i go to look at the pictures on play i can look through a few before its says "please turn camera off then on a again" it also says the same message


OK, if there is sand in the camera, the gears will bind or stop causing the error that you described. I think it needs to be taken apart and cleaned by a service center before using again. Or you could buy a spare caemera to use on your family holida ... Digital Cameras

I have a Panasonic Lumix DMC-LC50 and whenever i try to take a picture the lens comes out and automatically goes back in and then says "please turn off and on the camera again". I kept doing what it said but it keeps doing it so i bought new batteries but its still doing it. So how do i make it work again? Thanks, ANa


Hm.Maybe you should just stop being a **** and walking the streets at night so your parents can stop calling wondering where the ******** are you dumb ****.Oh yeah about the camera.I already have lots of pictures of your slutty *** so what the **** d ... Digital Cameras

HELP ME my Lumix DMC-FX8 lens wont go back into the camera and will only allow me to preview my pictures ...Please I am in Hawaii right now and the lens is stuck out and wont go in and it says Turn off and turn on camera again ....PLEASE Please someone help me


I read the previous answer, as I have exactly the same problem. So I decided the camera was dead. Having done this I resetted it via the menu - settings - reset. Then I turned it off and smashed it really hard against a flat surface three or four tim ... Panasonic Lumix DMC-FX8 Digital Camera

Lumix DMC-F3 When I turn the camera on, the display screen says "PLEASE TURN CAMERA OFF AND THEN ON AGAIN" when you do it, it says it again???


There is a problem with your camera Lens Assembly. It is not opening within stipulated time. The lens assy is jammed or damaged. Take it to service center. ... Panasonic Lumix DMC-LZ2 Digital Camera

Sony-cyber-shot dsc-w50 I blieve that the battery if fully charged however when I turn the camera on all i see is a blank screen saying "access" with the lense zooming in and out then a message comes up on the sceen saying "turn camera on and off" I do this and the same thing keeps happening, could you please help? Sara


Lens unit is faulty, may have had sand or damage at some time, focus assembly inside the lens is not focussing ... Sony Cyber-Shot DSC-S40 Digital Camera

When I turn on my Lumix DMC-FS3 Camera the lens tries to go out but it does it half way, then it goes in and the action is repeated about three times. Then there is a message on the display that says "Please turn off your camera and then turn it on again". I do that and the process repeats. Thank you.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-FS3 Digital Camera

I have a panasonic lumix DMC-TZ3 camera and it's not working. When I turn it on, the lenses comes out/goes in like 3 times but it won't focus and stay open. I can't take a picture. A message says to turn it off and turn it back on again, but it doesn't work. I can view my album in the the camera....please help!


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic Lumix DMC-TZ3 Digital Camera

Lumix TZ3 keeps giving the same error message: "Please turn camera off and then on again"


Sorry to tell you guys this but you definetly have lens faults, for you firwol i can say that you have a focus lens or image stabilizer fault, bob80 sand can definetly mess your lens around and is going to need a service. you can check the error code ... Panasonic Lumix DMC-TZ3 Digital Camera

I have a Lumix TZ4 that stopped working today. When I turn it on it says to turn the camera off and then on again and it leaves the lenses extended. I cannot do anything with the camera. Please help!


It is entirely possible that you have dirt or a grain of sand in the lens mechanism.find some one with an air compressor or get a can of pressurized air and blow around the lens.smack the camera lens down on your hand a few times ( not jo ... Panasonic Lumix DMC-LS2 Digital Camera

Our camera was dropped. It currently turns on and the lens telescopes out, back in and then out again. Once it does that is sends a message that says "Please turn camera off and then on again". Is there some type of "reset" button? It is a Panasonic Lumix DMC-LZ7


You have a lens problem. Try these:\012Fixing a Lens Error on a Digital Camera\012\012This has to be THE most ... Panasonic Lumix DMC-LZ7 Digital Camera

Do you have a solution of y lumix DMC - GF2 ? it always say "please turn camera off and turn on again" :( pleasE help : (


... Panasonic Lumix DMC-GF2KEB Digital Camera

When I turn on the camera, it says "lens error, please restart". The lens doesn't open when you turn on the camera- it is like it is stuck shut. you can manually force it open, but it won't go automatically, and so it keeps on giving the error messages.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon PowerShot SD600 Digital Camera

My fujifilm s1700 keeps saying please turn your camera off and on and when i do it still says this and wont let me take a photo. please help me asap as i need it for a wedding in 3days :(


... Fuji FinePix S7000 Digital Camera

On my camera when i turn it on the lens keeps opening and closing and on my screen it says "turn off and on again" and when i do that the lens keeps opening and closing and it doesn't work. Can you help me please?


This is the most common problem with dig cameras. The reason being that there are tiny gears inside the lens assembly, that operate it. When a tooth gets broken off, or some dirt, lint, sand, etc., gets in the lens assembly, a gear can get jammed ... Digital Cameras

I have a Canon Power Shot SD790Is DIGITAL ELPH and the camera keeps saying card error, card locked. I am aware there is a switch on the side of the card, and it is currently unlocked. When I turn the camera on however, it still says there is an error and that it is locked! Please help! Thanks.


HelloOk, here is something you can try:In your case the \015\012problem is not with the card but rather with your\015\012camera's card reader. This is a rather hard problem to fix yourself but\015\012here is what you can do. ... Digital Cameras

My Panasonic Lumix FS5 tells me to turn off camera and turn on again and keeps repeating this. the lens will not close - I have charged up batteries. This seemed to immediately follow me zooming in to photograph. The lens does move slightly backwards and forwards when I switch camera back on then remains firmly stuck fully out. Please can you help. Thanks


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic Lumix DMC-FS5 Digital Camera

I have small SONY DIGITAL CAMERA DSCW90S,when you turn it on the lens barral slide open, then closes then slides open then closes, the lens shutter keep nicely opening and closing but the barral is not stable keeps oppening and clossing for couple of times and then it says TURN THE POWER OFF AND ON AGAIN, but when i do so, it doesnt help. please help me, thank you :) Alena Lorinczova, DUBAI, UAE


... Sony Digital Cameras

I have a lumix compact camera but recently when ever i turn it on it trys and fails to focus then comes up with a warning saying "please turn camera off and on again" or something. im realy busy trying to film a video due in tomorow do you no any ways to fix this??


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Panasonic Lumix DMC-LZ7 Digital Camera

Panasonic dmc-tz3 keeps saying please turn camera on and off again


... Panasonic Lumix DMC-TZ3 Digital Camera

I bought a new canon 50d in july and used it through the summer sporadically in preparation for an overseas trip. Periodically got an error 30 message on the LCD but always ok after turning camera on/off. In India for 3 weeks in Oct. Got the error 30 screen 4-5 days a day during heavy shooting. Internet says error 30 is shutter problem. Does camera store (Ritz Camera in DC) fix this? Camera is barely 4 months old. What should I do? Please keep explanations simple since I am technology challenged


Sorry about the trouble you're having with the camera. I searched the manual for error code 30, but I found nothing.You could try Ritz, but I think you'll find they're probably not set up for repairs. Since the camera is less than a yea ... Canon EOS 50D Digital Camera with 28-135mm lens

Lumix FX9: Display says,"please turn camera off and then on again


Hard to say, this is very rare on a camera, but if a Reset back to factory settings does not work, im afraid it will have to be replaced. ... Panasonic Lumix DMC-FX9 Digital Camera

Lumix DMC-FX33. Keep on getting "Please turn camera off and then on again" over and over again. Occasionally I can focus and take a picture and the camera works for a day or two. Then the problem reappears in every mode accept picture play back. I tried cleaning the lens. Any ideas?


I have the same problem. It resulted when we used the camera is windy conditions with very fine sand blowing around. Some of those grains are lodged in the automatic lens cover and in the autofocus/zoom mechanism in the lens. I can actually hear the ... Panasonic Lumix DMC-TZ3 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5006 seconds