Having problems with your Panasonic Lumix DMC-LZ2 Digital Camera ?

My panasonic lumix DMC FZ20 will not turn the flash on, I have tried every setting and put it back to factory setting but it still will not work.

Answers :

Repair Help & Product Troubleshooting for Panasonic Lumix DMC-LZ2 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My panasonic lumix DMC FZ20 will not turn the flash on, I have tried every setting and put it back to factory setting but it still will not work.

... Panasonic Lumix DMC-LZ2 Digital Camera

Every picture i take is blurry. I've tried changing all the settings and going back to factory settings but nothing works. I've also tried all the different camera modes in all the proper times and none work properly. I took 25 pics at party with the party setting and night portrait and candle light setting and they all truned out extremely blurry. i dont know what to do except send it back

... Panasonic Lumix DMC-ZS3 Digital Camera

Won't work Have a C875 for a year now, and it has been working just fine. The other day I decided to try a AC adapter on it. Well, the AC adapter I used is one of those variable voltage ones. I set the voltage for 3 volts, plugged it in, it doesn't work. O.K. I put the batteries back in, still don't work. And, to top it off, the batteries get hot. Took the camera apart and I don't see anything burned up. Lost. Any help on what the solution could be and how to fix it would be greatly appreciated.

Oh no maybe you used different adaptor some adaptor have reverse polarity. check the adaptor before plugging it..if you using variable voltage set to 3v then adjust also the polarity. the polarity should match the polarity of your camera. ... Kodak EasyShare C875 Digital Camera

Have black screen after my friend said he had set it to night mode? drained battery and gone through settings and cant even see a night mode, tryed putting back to factory settings and still the same.

Some problem already occur with your camera, its proprietary software maybe the culprit, you said already factory setting don't work. maybe it need to reset the camera ... Sony DSCW320 Digital Camera

I have a Sanyo VPC-E760 digital camera that I bought used from a friend. Yesterday, I stupidly forgot to put the memory card back in the camera before I left for my son's first field trip. Now I have 12 pictures on the internal memory and cannot figure out how to get them onto my card-which is now back in the camera. I think I still have the old cords from my Kodak Easy Share camera that I lost, but I don't want to try them if that won't work. On my old Kodak, there was a setting where I could t

First ..choose a picture that ya know that is on the internal memory ..and see if it has options ...it usually has....there you will find option for move ..or transfer ..or so ...if it doesn't have ..you got to fins a suitable data cable ...and use t ... Sanyo VPC-E760 Digital Camera

Ok so ever since i went to the beach when i got home every time i click the power button it says "zoom error" ive tried pulling the lense out ive tried blowing any particales that could have been in the lense out ive taken out the battery and memory card and put them back in and it still isnt working please help.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... FUJIFILM FinePix J40 Digital Camera

My flash has stopped working for some reason - I tried to use it yesterday and all of a sudden the camera takes pictures without the flah. I went on the flash settings and made sure it was set on Auto and then tried to take the picture again but no flash still. I then set the flash to go off on every picture but still the flash did not go off I would like to know how to get the flash working again Thanks

Either your batteries are weak or your flash is dead. ... Olympus FE-210 Digital Camera

My camera, a nikon d70s, wont turn on and work. ive taken the battery out and out it back in, still wont work. i then tried 2 charge the battery but still wont work. i then tried to re-set it but it still wont work.

If the camera does respond when you hold down the shutter release, then the internal clock battery may have drained. As the manual says on page 17, charge your main battery, put it in the camera, and leave it be for up to three days. ... Nikon D70s Digital Camera

Camera Frozen When I turn on my DMC-FX07 none of the buttons work. The zoom doesn't work, the menu button doesn't work, the flash settings dont work. It won't switch from current picture when in viewing mode. I have tried all the picture wheel settings and every one is frozen. I have trie pushing and holding every button and removing and replacing and recharging the battery several times. When I replace the battery the autofocus works but then it freezes (when in heart mode) with the backli

Hi,I tried Option No.1 successfully when my Panasonic DMC-FZ7K froze once:Option No1:1. Try turning the camera on with the battery inserted.2. Now remove the battery while the camera is on. ... Panasonic DMC-FX07 Digital Camera

The lever to zoom in and out wont work. we have reset factory settings and it still wont work. tried 3 different sets of batteries and even new memory cards. still othing. this camera is only 4 months old.

... Digital Cameras

I have a Sony Handycam DCR-HC27E Camcorder which was working great until a few days ago. my problem is its suddenly not showing my recorded tapes, I was watching footage only a few days ago from my recent holiday, the images were starting to get grey stripes across the screen, thought this was due to a low battery, put in a new one, still no images showing. Put in other prrecorded tapes they are showing nothing as well. Then I tried to record which works fine, but when I played it back its still

The gray strips usually mean the camera has dirt video heads - if it hasn't been dropped. Get a head-cleaning tape from Radio Shack or Best Buy, and run it a few times. If that doesn't do it, it'll have to be cleaned by a repair shop. Off brand ta ... Digital Cameras

Flash has stopped working on my Nikon D40. I've tried a factory reset, tried to get to the flash setting but that menu option is no longer available (highlighted) in any mode. I'm thinking it's broken and not a setting thing. Everything else works fine and it still takes pictures just without the flash. The flash pops up when needed but no flash obviously.

There's a common problem in the flash arm. I found this link that shows a simple repair. If you use this and make the repair yourself, understand that you will void your warranty if you have one. Also, do not touch the bulb as you'll get oil on it ... Nikon D40 Digital Camera with G-II 18-55mm Lens

The flash does not work even if the flash setting is SET to FILL ( the flash will work every time the camera is in used) I already tried to reset the settings to default but still the flash wont work my camera is olympus FE 190

Does the camera indicate that the flash is turned on? In most olympus cameras I have seen there is a lightning blot at the lower left corner of the screen. Verify that it is indeed there and let me know. ... Olympus FE-170 Digital Camera

Black screen hi, my finepix z1 was working fine but i didnt charge it for 3 weeks and it whent dead, when i charged it again and turned it on the screen was black and the pictures i take are purpuish and can hardly tell what it is, i can still see the old pictures and downloaded to my computer fine, i tried to reset it and still wont work, i took the battery off and put it back in and still wont work or record anything

This is a CCD sensor ( see pic below from Canon camera with same pixalage and specs ) problem : outputting too much noise or nothing at all so the sensor must be replaced ( not a big job but ha sto be done by someone with experience and the right pa ... Fuji FinePix Z1 Digital Camera

Was taking pics last night at Disney World, went to put camera away & the lens would not go back in. Tried putting fresh batteries in and still nothing. Today tried again & camera comes on saying Lens Error! It's making a noise like it's trying to go in but nothing. Also nothing else working on camera either. Any suggestions please.

Get a can of compressed air, attach the included straw, aim it at the crevice where the body and lens housing meet. Now give it two or three good blasts and power the camera at the same time to see if the lens retracts, if not! take the ... Nikon COOLPIX L18 Digital Camera

Battery? I just purchased the camera last night. Installed the included batteries, took a few pictures. When I put the camera into auto macro mode, set the resolution to super fine and try taking a picture, the camera shuts off and will not come back on. The lens is still extended from the camera. The same thing happend last night, without the super fine resolution. I took out the batteries and put them back in and the camera functioned normally. But today it will not come back on. A

I just got mine today, and the batteries were dead withtin a couple of hours, so yes.\015\012\015\012mines has decided to go black, it was fun while it lasted,, theres \302\24390 ill never see again ... Samsung Digimax S500 Digital Camera

My camera is charged but for a while when i turn it on the screen is just black and my pictures do not come out. It has been doing this for a while but on and off and would usually start to work again after a while. Now it hasnt gone back to normal for a long time and i cant take any pictures. i tried taking out the battery and memory card and putting them back to refresh it but it still wont work. Its the last week of school and i need my camera to work asap !

Some times it works and sometimes not, it is due to loose contact.\015\012Try cleaning the battery terminals to remove oxidation and other coating formed due to atmoshphere, ensure memory card terminals are also well cleaned and battery is char ... Digital Cameras

My D70 was working normally when I last used it. I left it safely stored at my vacation home for three months, and when I tried to use it today it appeared to take pictures, all functions seemed to be working, but reviewing the pictures I see only a black monitor. It shows a file number, the info shows exposure details but there is no image. I did a re-set to factory spec, put in a fresh battery, tried several memory cards, all with no success. Looking at the memory card on my computer shows the

The shutter in the camera lens is not working, the motor that controls the aperture has failed or the related gears. This device will require a camera specialist to resolve the issue and an estimate recommended. ... Nikon D70s Digital Camera

Hi there. i have a canon ixus 30 camera. i brought a brand new 4gb memory card for it. when i put it in the camera it says 'memory card error'. i read somewhere that formatting it helps but when i tried to format it on the camera it doesnt work because the format word is blacked out. i also tried formatting the card on my computer. it formatted it but when i put it back in the camera it still came up with the same error message. what can i do to fix this so i can take pictures etc??????

Many people are unaware that the newer SDHC format cannot be used with most older cameras. Your camera was manufactured well before the SDHC format came out. I'm sorry, but there's no way that a 4GB SDHC card will work with your camera, it just doe ... Canon PowerShot SD200 / IXUS 30 Digital Camera

I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.

... Panasonic Lumix DMC-FZ28 Digital Camera

My cameram each time it starts makes me have to chooose where i live the time and the month again, i just bought the camera a few months ago brand new. i did all the settings and click ok but when i power up it does th whole start up setting again, why is this happening. i tried seting to default but still nothing. i took the battery out and put it back in. still. any help would be great to ge tit to keeop the date and not start the setup again. its a casio exilim 7.2 megapixel ex-z75

The same thing is happening to me with my ex-z75. i don't know what caused it and i'm also having trouble getting it to stay. ... Casio Digital Cameras

Error Message Hello! Every time I turn My Sony camera on it starts beeping and and giving me the error message "Turn the power off and on again." I've tried turning it off and back on, along with taking the battery out and putting it back in and even pressing the reset button and I'm still continuing to get the same error message. Any ideas on what I can try next?

I have the same problem ... Sony Cyber-Shot DSC-L1 Digital Camera

My Canon 5D mkI turns on ok, will focus, displays top and back, but it will not take a shot. I have two batteries, both which I have charged to full and tried (display shows full charge). I have also tried two seperate CF cards. I have tried cleaning all contacts. Still it won't take a photo. The shutter will work when I use the "clean sensor" function though. Also, I have reset all settings on the camera. Anyone know why the camera isn't firing off a shot?

Hicould you tell me the amount of shot number when you put memory card in? If yes, please move to manual position from auto on the side of lens. And try to press release button.there is other one thing you have to chack selftime release working or n ... Canon EOS-5D Digital Camera

My flash does not work it is turned but does not flash..i tried resetting to factory setting but still wont work. was working fine yesterday

Chek if you are using Auto mode, or you changed it by mistake to Program or any other mode. If this is not your case, the software or some parts might be damaged, and you have to take the camera to a Canon dealer for repairs. ... Canon PowerShot SD100 / IXUS II Digital Camera

Guru.. Thanks for your advice. I tried every suggestion on the link you gave me but nothing worked. My SD750 is still dead with the lens fully extended. What else could I try? Another thing... I bought it almost a year ago new but refurbished from factory.

Did you lose power totally (nothing is working or lighting up)? If so, then see this post instead:\015\012\015\012htt ... Canon PowerShot SD750 / IXUS 75 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0813 seconds