Having problems with your Panasonic Lumix DMC-LZ2 Digital Camera ?

Hallo, when I turn on my Lumix DMC-LZ2 the display is black, and the image appear only if I press or twist strongly the camera. In the review mode the stored pictures appear on the display without problems. Thank you.

Answers :


The problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair \012center for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

Hope \012the advise is useful.

Repair Help & Product Troubleshooting for Panasonic Lumix DMC-LZ2 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hallo, when I turn on my Lumix DMC-LZ2 the display is black, and the image appear only if I press or twist strongly the camera. In the review mode the stored pictures appear on the display without problems. Thank you.

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-LZ2 Digital Camera

Blank screen My Olympus FE-170 display screen is white, rather than showing whatever the lens is pointed at (regardless what mode the camera is in). Oddly, icons display just fine and stored pictures can be viewed clearly on the display. This problem occurred without warning (it was not dropped or damaged) and the camera is just one year old. Have you ever encountered this? I?ve read the entire manual and can?t find anything on the problem.

This sounds like CCD sensor is faulty and should be replaced . Camera works fine in playback mode generally with this problem but not in capture mode ( camera has gone 'blind'). Should be repaired free of charge if the camera is as old as you say. ... Olympus FE-170 Digital Camera

Blurry LCD Well, I have recently got a SD400 camera from dell.com. The first thing I noticed was the inaccurate LCD. The picture in the LCD seemed blurry(bad resolutoin, weird coloring) and inaccurate. But, after actually taking the pictures, the picture seemed perfect. (In the review mode and the display right after you take a picture.) Is this a problem? This is my first digital camera, thus I had no previous experience with camera LCD. Or is this normal, without flash, everything is suppose

Hey i found this site that is great on how to change a LCD for the camera\015\012\015\012http://digitalcamerarepair.googlepages.com ... Canon PowerShot SD400 / IXUS 50 Digital Camera

Sony dsc-13 I have sony dsc-13 digital camera and suddenly after switching it on in picture mode and video mode the data(day nd time,flash....etc) appears on a black background on the lcd though the lens door is open and i can see my previouly stored pics in the camera lcd and also in my computer after connecting through usb.. so the problem is i take black pics and videos while the lens is open and the charger attached or on full battery,and the new taken pics displays black as well

Basically it is a Japanese Model from where u bought it u are lucky u can\015\012get it free of charge replacement just tell me which region u belong\015\012there is a known issue of CCD failure u will get free of charge repairs\015\012fo ... Sony Cyber-Shot DSC-T3 Digital Camera

Canon s2IS when I turn the camera on in review mode the LCD screen displays pictures one after another. Cannot stop the picture review except to turn off the camera. In camera mode the menu button and other buttons do not function. The problem occurred while I was pressing and holding down the LCD review button and viewing hundreds of time-laps pictures I had taken with the camera.

Hello,\015\012Please do the followings.\015\012\015\0121. Turn off the camera.\015\0122. Remove the memory card.\015\0123. Remove the batteries.\015\0124. Wait at least 3-5 minutes.\015\0125. Place the memory ... Canon PowerShot S2 IS Digital Camera

When I turn the camera on, the canon logo appears on the display and the red light in back above the menu button keeps blinking, but nothing happens. When I turn it on in the "taking pictures" mode or "view pictures" mode, it just hangs and acts like it has trouble reading the CF card. I've tried multiple cards and had the same problem, so I think it's the camera and not the cards. Any ideas?

Canon logo is starting of camara indications just as company manuals ... Canon PowerShot S1 IS Digital Camera

Faulty d40x hi i bought a d40x off ebay the other day and couldnt wait to start snapping.... problems: - The error message "initialization error. Turn camera on and off again" appears. Upon turning the camera off and on again, the same message appears. After several times trying it still does not work. Also, the menu screen appears, and just keeps flicking from menu to menu constantly. As well as this, on the playback mode, the picture of the image displayed keeps zooming in as far as

I would start by looking at all of the push buttons on the camera. One may be stuck down. ... Nikon D40x Digital Camera

Sanyo Xacti VPC-HD1 The display screen is completely black when in record mode; both for still pictures and video mode - yes the lens cap is off. The camera display will play back images and video previously stored on the memory card, but does not display anything new that I have tried to capture since the problem occured.

... Sanyo Digital Cameras

I HAVE A GR2 DIGITAL CAMERA. I usually shoot in manual mode and and set white balance manually using a digital callabration target. Yesterday afternoon, after shooting most of theday without problems, my images started appearing completely washed out with an orange cast. This cast also was all over my calibration target image. The image was unclear with stripes running horizontally across my display. This problem is present in all modes. Itried everything I could think of to resolve the matter

I doubt that formatting the card will do anything but, if you choose to do that, download any pics first since formatting will completely erase the card. Have you tried going back to "Auto WB" to see if your camera works properly that way? How about ... Ricoh GR Digital Camera

The camera is a sony cybershot 5.1 megapixels. when reviewing previous pictures there is no problem but when in camera mode wth the lens cover open the image is opaque and lines appear across the screen. the battery is fully charged and there is plenty of spare capacity on the flash card

There is a problum with ccd imager ic so please go to your nearst sony service centre & fix this problum ... Sony Digital Cameras

The display on my Ixus 500 has gone blank. It started to show weird colours when switched on but turning it off then on returned the display to normal. I knocked the camera the other day and the display is now blank both in camera mode and picture review mode. The camera makes the usual noises when selecting Menu etc. It also save picture to the memory card. Is it worth taking it to bits to look for a loose connection?

This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot SD100 / IXUS II Digital Camera

FLASHES C:13:01 When I turned the camera on, I looked at monitor to take picture and was flashing C:13:01-wouldn't take a picture. Shut camera off, turned on and got two pictures off. That was it. By shutting camera off and on was able to get to the review setting and viewed the 80 pics. stored; that was yesterday. Today I get the c:13:01 code on each camera mode and review setting only shows the 2 pics from yesterday, then blue screen, though as I push the review button the on screen picture nu

OMG!!! If you still have the camera, try this. I read in one of these forums to spray a burst of brake cleaner in there and blow dry for a few seconds and believe it or not, it worked! That's after me taking it apart to make sure the connectors weren ... Sony Cyber-Shot DSC-P200 Digital Camera

Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho

I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera

I have 2 Sony cameras with problems..one is a DSC-T1..there is no picture when in the camera mode..will display pictures made earlier..lcd is blank in camera mode. The other camera is DSC-F717..Camera has hardly been used..in camera mode the lcd only shows a smeared image..the image is not recgonizable. Strange conicidence, but both failed nerly at the same time.

Hi kd4kdp,\015\012Both of your camera have bad CCD Imagers and must be replaced. Good news for you is that Sony will replaced these parts free of cost. Check more details on following Sony web link. Have nice day.\015\0121= ... Digital Cameras

Problem with the Canon PowerShot A630 Digital Camera Turning on camera in picture taking mode has lens going full zoom. In picture review mode no controls work. Out of a sudden I can't preview anymore, and in camera mode the zoom goes to 16X and I can't take pictures. Just doesn't work. I did not drop it or harm it in anyway.....please help.

This is going to be an internal problem. It sounds like you might have two problems going on. The zoom switch might be broken, and jammed in the on position. As for previewing your pictures, this could be a slightly loose ribbon connector from ... Canon PowerShot A630 Digital Camera

JVC GZ MG77aa problem: When i turn my video camera on it works in picture mode but as soon as i turn it over to video mode a screen pops up sayin "communicating" [with a picture of arrors pointing to a video camera logo and then to the battery logo,] i have checked the battery at a JVC store and it has been checked and everything is fine with that, its just weird it works in picture mode and not video mode anymore it just keeps showing that "commutating' logo and restarting and does the same thi

This sounds like the software that initiates the video is amiss, and the camera can't initialize the video function. If so, the main board has to be replaced to fix it.\015\012However, just to check, make sure the battery contacts inside the ... Digital Cameras

When I turn on my camera to take a picture the display screen is completely black. If I try and take a picture nothing comes out. The whole picture is completely black. The camera is still functioning as if it is taking the picture. The flash continues to work, but unfortunately no picture comes out. But when I switch to the display mode to view my pictures, I can see the old pictures from my memory card. But I just can not take any new pictures. What should I do? What do you think the problem i

Hi there,You can refer to this page as this is helpful for most of the issues related to Digital Camera.Fix th ... Canon Digital Cameras

There are horizontal lines in my photos, The LCD screen display is fine until I take a picture, then the lines (yellow/ orange) appear in the review. I have 2 Z612 camera with the same problem.

The circuit which displays what photos were taken has a faulty capacitor which causes this appearance to the screen. To have this repairs outweighs the cost of purchasing a new camera ... Kodak EasyShare Z612 Digital Camera

My problem is with my Kodak z712 digital camera. I realize this site stated batteries but cannot get to a kodak website. So gonna ask anyway.....i took some pictures and went to the "review" button to check them out and all i get is a blue screen that says "no pictures or videos to display". I just took about 15 pictures and they are all gone. I have never had this problem before. Had the camera about 2 years. excellent camera until this happened. can you tell me what's goin on with it?

I would first check the memory card! Then I would try to reset the camera ... Kodak EasyShare Digital Camera Lithium-Ion Rapid Battery Charger

I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"

Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras

Bought a digital camera two weeks ago, FE3000 Olympus. Cant take a picture without horizontal lines appearing on my LCD.only 20% of the pictures I take are without these lines. When I use the video, its is perfect. Still images however are difficult to appreciate. I bought camera for daughter because I thought it was a point and shoot camera. Even in iauto mode I seldom get a perfect shot. What is wrong???????Please help me. I am willing to pay 9.95 if you can help me fix my camera. Again its an

The lines on the pictures are most likely caused by a ccd sensor problem, its the sensor that actually takes the picture.The issue could be the lcd display failing but since the lines come to the pictures that you get from th ... Digital Cameras

I have a brand new G12 and have used it for the past 10 days. I loved it until it would no longer take pictures. This is the problem: I turn on the camera and the display screen is black. I take a picture and nothing appears. However, I have no problem viewing previous pictures taken before this issue. Can you please help....I really want to love the camera, but I should not be frustrated after 10 days. THANKS

That's usually the CCD Sensor. If you can take it back to the store since you just bought it, do that and exchange the camera. If they won't help you, get the original receipt and the warranty information and get it to Canon, it should be covered ... Canon G12 Digital Camera

I have a Canon A75 Powershot in excellent condition. Since yesterday it dosn't work. When it is in capture mode, I cannot see the picture from the LCD display. Display is working. When I try to take picrures I get a black picture with nothing on it, just like I am capturing in a very dark place. But I can see pictures that I have captured before the problem. What can I do? I am Christos, from Cyprus. Is there anyone who can fix this problem with my camera?

CCD is gone.Need replacement. ... Canon PowerShot A75 Digital Camera

Fujifilm A330 My camera is doing something rather strange; it's always switched on by sliding the front shutter open all the way, and it's ceased turning on when I do that. My dad and I figured out that we can get it to turn on by holding the 'on' button in the back, but it won't get out of the menu/blue 'no image' LCD display for reviewing pictures. In the past, holding the 'on' button was what changed it from picture review mode to picture taking mode, and since everything has swapped around t

My switch was dirty... very dirty. I took my camera apart (NOT SUGGESTED FOR THOSE WHO DO NOT KNOW) and cleaned it which was NOT the easiest job. I would take it in to get it serviced if youw ant to play it safe. Take it apart only if you expect to n ... Fuji FinePix A330 Digital Camera

I have a Canon PowerShot S5 IS, and a few months ago I started getting a lense error whenever I went into phototaking mode. Every once-in-a-while when I went into the "view pictures" mode, the lense would retract itself, but when I tried to take pictures again, the lense would go out and "lense error. restart camera" would appear on the screen. A few weeks ago I finally got my camera fixed at a shop. I got the camera back and used it for about a week, now the same problem is happening. I've

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot S5 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6428 seconds