Having problems with your Panasonic Lumix DMC-LZ3 Digital Camera ?

My Lumic DM-LZ3 won't turn on. I put in new batteries. Once or twice it came on for a second and then went out, now it won't come on at all. What could be done?


Answers :

Could be a lens problem.\012Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-LZ3 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Lumic DM-LZ3 won't turn on. I put in new batteries. Once or twice it came on for a second and then went out, now it won't come on at all. What could be done?


Could be a lens problem.\012Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common fail ... Panasonic Lumix DMC-LZ3 Digital Camera

Lens Stuck My Lens is stuck on my Coolpix S200 and I'm getting the Lens Error message. I tried to push it back in like I read on here and it went partly in and now its completely jammed. I've only had my camera for about 4 months. Please help!! I'm hoping to fix it myself. i dropped my camera and now the lens wont come out. Everytime i turn on the camera it tells me to turn it off then on again. I've done it multiple times and it doesnt work. I tryed to push the lens in and out but it doesnt ma


YOU CANNOT REPAIR THIS SOPHISTICATED CAMERA YOURSELF!!\015\012I guess pushing the lens inside may have made the problem worse.\015\012I follow a rule- if you drop an electronic equipment and a problem occurs- it usually takes a profession ... Sony Cyber-shot DSC-S700 Digital Camera

My cameras lens wont come out, its stuck. when i turn it on.. it makes noises, & tries to come out, but wont extend.after like 10 seconds of it making noises, it saays lens error. i have a NIKON COOLPIX S202. please get back to me, i have a trip in a couple days & need to know if my camera will be in use. thank you!


Hi, ... Nikon COOLPIX L3 Digital Camera

Not working we loaned our optimus 5.o mega pixel to a friend he said he took 4 pictures then the battery died I tried to charge the battery and it still wont work. It wont even turn on with it plugged in to the wall. Could the charger went bad or the battery and charger. or what. we have had this camara since aug of 06. could some one help I have a wedding in 2 days that I need this for. Thanks for any info in advance


Wher do I get a new battery? ... Optimus DS-5080 Digital Camera

I have a kodak 8.2 megapixel that wont charge. i think its because the lens was out when it went off and wont come back in.The light blinks whenever i try to turn it on and it wont turn on


Light blinks problem in the mother board/short circuit/power drainage in the electronic components, ur not able to get charged ... Kodak EASYSHARE M1063 Digital Camera

Lcd display not working.nikon p500 went into watrefalls.. after putting it into ricebag for few days ( service center guy told it can t be done) after few days i could switch on camera , and could take pictures from view finder, lcd display seem to be not working.. any thing advisable to make work? can i go for new lcd, if so how much it would cost..


Yes you can replace it You must to do the decission replace LCD vs New camera. Call or go to NIKKON and ask them where is difference in cost Sometimes replace is cheaper that to buy. Other is better to buy that replace specially in USA.God bless ... Digital Cameras

First of all, I cannot get the camera to turn on using power button only play. (it worked two times so I could take 5 pictures, now it wont work) Secondly, the 5 pictures I did take cannot be deleted using the delete button! Pleeease help. I purchased the camera in the U.S and Im already back home and wont be returning!@


... Polaroid i1036 Digital Camera

System Error I downloaded the pictures onto a CD from my Konica Minolta today like I always do. When I was finished I went onto the camera to delete the pictures and format the card - like I always do. (I have had this camera for right at 1 year) When I turn the switch to the "view" mode it comes up with "system error" within about 2 seconds and the whole camera turns off. If I go really fast I can delete one picture at a time. I can still take pictures and they still show up (for 2 seconds).


Same thing happend to my father's camera (memory card). Seems that deleting the pictures from the card via the computer solves the problem. Corrupt files on the card cause the camera to read system error. No corrupt files = working camera! :) ... Konica Minolta DiMAGE Z5 Digital Camera

I just bought my camera while on vacation and everything worked fine. I came home and tried to take a photo but the battery went dead and the camera did not retract. I charged the battery thinking I could put it in when charged and this camera would retract but it still wont. I can look at pictures but when I put it on the feature to take photos the camera shuts off and it still wont retract. Thank you please respond to [email protected]


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Olympus Stylus 7010 Digital Camera

Camera lens wont deploy when camera comes on and indicator lights blinks and after about twenty seconds the camera shuts itself off. It wont display any pictures whatsoever.


HelloThank you for using FixYa for your problemYour camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras ... Canon PowerShot SX110 IS Digital Camera

I have an Olympus FE-46/X-42/X-41 camera. The old batteries went dead I replaced them with new batteries and the memory card is properly in place but it will not turn on and stay on to take a picture. When trying to start it, ared light comes on on the back of the camera just under the ''W'' button for about 30 seconds, then blinks for another 15 seconds then goes out.


... Olympus Digital Cameras

Hi I my new(3 months old ) PowerShot SD1300 IS camera has a problem. Initially worked fine ,but suddenly it is not working. Issue is it will power up only once after many (5 to 6 hrs) put idle.When powerd on , lens will come up and the camera will go of,lens will remain out.It wont respond(power led also goes off).Again if we put idle for some hours when we press first lens go in ,comes out and again goes off. Please let me know what could be the problem.I checked it is not problem with battery


Hi. I\015\012 note that you have checked the lens and Canon service has said the PCB \015\012needs to be replaced, but the cost is too high. However you have asked \015\012if there is anything else you can do. ... Canon Digital Cameras

This Sucks! My camera is new, I went to use it...actually for something I saw that was hillariious...and I turned it on, the lens came out...it was zoomed all the way, and I could'nt take the pic nor could I adjust the zoom. Then I got this hateful message to turn camera off then on again, which I did. Now the lens does not return apon turning the power off, but does retract and come back out when I turn it on...and then the same scenario! Help Please!!!!!!!


I think this is just a hardware malfunction(some mech. switch) because, i have a lz7 and when i deliberately open the battery case with the camera power on it obviously switches off and then when u close the battery case either with the power on or o ... Panasonic Lumix DMC-LZ7 Digital Camera

Low battery? I got my camera today, setup the setup menus, and had started to check out the features when the low battery warning came up. So I replaced the batteries and tried to turn the camera on but now all I get is the green light comes on for 3 seconds, goes off and approx. 5 seconds later the light flashes on, then off and the camera beeps 3 times, and nothing after that. The lens does not move at all. I went out and bought brand new batteries that were industrial strength and tried those


Cameras belonging to the S Series really do have a battery type option that needs to be set up first before taking any pictures for proper power connection.\015\012\015\012Recommended batteries are just:- Alkaline (Non-rechargeable) ... Samsung Digimax S630 Digital Camera

I just bought a new memory card for my camera and a message comes up on the screen ''card not initialized''. I don't know how to do that. My daughter said it could be done by plugging it into the computer somehow, but I need directions on how to do that. Could you please help me. I'm not very savy on this stuff.


Hi,Your new card needs Format through camera menu format option, then it will be ready to save/ store pictures.Please check camera Menu and find out format option, select it and format new card in camera. Or let me know model of you ... Fujitsu Digital Cameras

Put camera on screen come on lens came out thwn power went off now power light wont stay on long enough lens wont go back in


Maybe this works: turn your camera on in play mode (if you have play button press it to turn on camera) and if your camera hase a shoot-play switch select play mode and then turn your camera on.)\015\012repeat this until lens goes back.\015\012I hope ... Samsung Digital Cameras

My camra i droped it last night and now it wont come on. it comes on for a second and then goes off.


... Digital Cameras

I have a Canon Powershot S3 IS and I was looking at picture I had taken and the lens was retracted. I switched to the camera mode and the lens started to come out and hit my leg and stopped half way. The lens went dark. I turned it off to retract the lens and then turned it back on. The lens came all the way out but the screen is still black and I could feel the camera and just barely hear it making the noise it makes when the lens is coming out but it was already all the way out. I switche


Format ur memory card ....and replace the cells.....might work...contact the customer care for help ..they mightr be able to fix it ... ... Digital Cameras

Pictures a very overexposed. Inside I can shoot without a flash at 400 ISO and they come out right. Outside they turn white. Also the shutter speed won't register. I can set it at 125 or even 500 and it comes out at about 1/30 or 1/60 of a second. Lower shutter speeds are actually lower. This happened a day after I cleaned my sensor. Could that be the problems?


Have you set the 400 ISO, or do you have the camera on Auto ISO?\012\012\012Go back to your setup menus and set the Sensitivity to the lowest ISO value possible.  Now set the White Balance to Auto. Exit the menus.Now set the camera t ... Pentax *ist D Digital Camera

Help The last time I used my camera a maybe a week or two ago, it shut off because the batteries died and the lens never pushed back in. So, I just now went to turn it on after putting in new duracell batteries in, which I have used all different kinds in my camera, I have it sent so that the Samsung icon is on as it starts up. So that came on and after a second you can see on the LCD screen but it is blurry and after a few seconds I hear 3 loud annoying beeps and then it shuts off. What could b


The 3 beeping sound as ou call it annoying means that the camera has low battery capacity. the lens is stuck out because there is incorrect battery connection. there is an option on the camera setting for the battery type. try this one:\015\012 ... Samsung Digimax S630 Digital Camera

I am able to transfer images to my computer, but when I try to turn the M893 camera on when it's not connected to my laptop, the screen comes on for a second or two, lens comes out, green light is on and then blinks and turns red and blinks and then lens goes back in and camera turns off. I've tried removing the battery, wiping it off, putting it back in, camera also wont charge. It's never gotten wet or been exposed to extreme heat


It has problem on the lens. Lens doesn't extend when transferring pictures that's why it works. Kodak cameras are designed to automatically shut-off when the lens is struggling to go in or out.Follow step-by-step solution and repair on ww ... Kodak Easyshare M893 Digital Camera

I am using Canon 1000D dslr for more than 18months, it was working fine until last Sunday. I went outside and started taking few shots... it was not focusing properly (or should I say not at all!) and pictures are coming blurred. When I press the shutter button half, it should run the motor (in autofocus mode) and focus, but it is not doing anything (i.e. no red dots are coming)... what could be the problem? Thanks for any help.................


The autofocus motor could be be broken, or the lens may not be communicating correctly with the camera. One thing that can help if it's not communicating correctly is to clean the lens contacts. If you take the lens off, you should see some gold plat ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I just purchased a fuji A820 digital camera and for some reason when I went to turn it on it said focus error on the screen.now the lens wont shut or go down...what could the problem be? Please help. THANX


For whatever reason, the lens has failed. This can be caused by many things: the lens motor has failed or is stuck, the gears involved in driving the lens have jammed, or, as pointed out previously, the lens itself, a series of tubes which fit into o ... Digital Cameras

Lens problem When I turn on my camara it stays on for only 30 seconds, the blue screen stays on and the lens part wont open ,its stuck,, then the camara just turns back off. Ive replaced my AA batteries and thats not the issue. Someone please help,, christmaS is coming and I needed my camara. Thanks


I had the same problem with my canon powershot sd 400.\015\012The shutters would not shut and the lense was halfway out.\015\012When I turn on the camera, the screen saver stays on, and after a few seconds, it turns itself off.\015\012\015\012I got a ... Canon PowerShot A520 Digital Camera

The lens came off and the screen shuts off a few seconds after being turned on...and the piece that comes out when turned on wont go back in and its crooked whats wrong???


Sounds like your camera has suffered an accident. Needs service. ... Sanyo Vpc-s1070w Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1293 seconds