Having problems with your Panasonic Lumix DMC-LZ3 Digital Camera ?
Memory card when i turn on the camera it comes up with this message 'This memory card is protected.' How to I 'unprotect it?
Hey... I just figured it out. I have had the same problem and just figured it out. On the memory card itself, there is a lock option. You need to unlock the memory card itself. Good luck!!!
Go to your menu section and disable the protection there.
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-LZ3 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Memory card when i turn on the camera it comes up with this message 'This memory card is protected.' How to I 'unprotect it?
Hey... I just figured it out. I have had the same problem and just figured it out. On the memory card itself, there is a lock option. You need to unlock the memory card itself. Good luck!!! ... Panasonic Lumix DMC-LZ3 Digital Camera
When I put a memory card in my camera its says it needs formating, so I push continue to format and it comes up with the message read only memory card remove write protection to capture or write to card. The switch on the memory card is in the right position. I think something is wrong with the camera, I installed a brand new memory card and got the same message.
Is this a different manufacturer than your\015\012other cards? Is it formatted correctly (e.g., FAT16 instead of FAT32)?\015\012Otherwise, not all cards are compatible with all cameras. There are\015\012subtle differences in the IDE drive ... Kodak EasyShare Z740 Digital Camera
Memory card is protected how do i switch on memory card when i turn camera on, message reads that the memory card is protected and to reset switch on memory card. what happened?
SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the ot ... Kodak EasyShare CX7330 Digital Camera
Upon turning on my camera the message 'lens error restart camera' appears against black screen. I've turned off the camera and have tried turning on again. Still same message. Prior to the above message, my camera displayed a message 'memory card error card locked' and I was not able to see view my photos. I took out the card to see if it was in a locked position to which it was not. Please help as I have vacation photos on this memory card!
Can't help with the camera- sounds like it has a fault.The photos, however, should be recoverable by putting the memory card into a card reader on a computer. ... Canon PowerShot SD1000 Digital Camera
When I turn my camera on it says "Access" then a message comes up that tells me to "turn the camera off and then on" I have tried this many times and all the camera does is continue to push the lens in and out and then tells me to "turn camera off then on" Problem will not go away. Fully charged battery, took battery and memory card out for a while and re-inserted both and have same problem. [DSC-W55
This is a firmware problem that is common with many many digital cameras. It will have to be upgraded. The company will do this for $50Otherwise you may be able to find a kit online and do it which would be hard to located ... Sony Cyber-shot DSC-W55 Digital Camera
Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t
HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera
Frame error Turn on and take photo and then a message comes up saying "frame error" and then Even shutting the camera off. When turning it back on it still says "frame error" . When you take several photos you only end up with a very few on the memory card. What is the problem and how can i fix it? I cant view any of the photos. I replace camera with a new battery. Could it be my SMART CARD. Need help! Fuji MX-2900
... Fuji MX-2900 Zoom Digital Camera
Memory card i used wallmart site to download pics, with the usb, when i was done turned the camera back on, the message i get says memory card is protected, reset switch on memory card, i have done this several times and it is still there.i can not remove it or take pics, but i can get into the review option. help.
There is a catch inside the camera that is possibly out of whack. You need to make sure the camera itself is not moving the security slider on the memory card. This would be due to puting the card in wrong or just from wear on the camera. ... Kodak EasyShare C340 Digital Camera
I own a Kodak V530. It won't accept the memory card. The LCD screen says memory card requires formatting. What can I do to get it to work with memory cards. This message come on the LCD screen when I turn on the camera.
What you need to do to get the card to work is you need to formate it to your camera. On the link below on page 4 tells you how to formate to your computer.\015\012\015\012 ... Kodak Digital Cameras
Cannon s5is powershot as soon as i turn camera on a memory card error comes up and theres no card in it, does same thing when card inserted. it's got to be something in the camera slot, is there a lock in there or something to clear this message
Try downloading the cameras firmware from Canon.\015\012\015\0121. Once you have downloaded the file, place the firmware on the SD card\015\0122. Insert the SD card into the camera with the camera off\015\0123. Turn the Camera on and follow the ... Canon PowerShot S5 IS Digital Camera
I put my memory card into my Kodak EasyShare C143 digital camera. I press the review button, but all that comes up is that the file is 'Unrecognised'. One out of the three pictures is unprotected, but the other two are protected. When I try to delete the unprotected picture, it doesn't work. When I try to 'Unprotect' the protected pictures, it doesn't work either. Please help and I am grateful for any suggestions. :) Thanks.
It sounds as if the card was not formatted for the camera before it was put to use. My suggestion is that you attempt to download the images that you do have to the computer, then format the memory card. Always format a new card and after each time y ... Digital Cameras
MEMORY CARD I bought a memory card to my camera and when I incert it the camera have a rare sound and turn off. Every time I turn on the camera, show me a window to format it and if I press yes, do the sound and one more time turn off. The memory card is a Sandisk SD 2GB CARD. Please help me. Thanks. Send me a message at [email protected] Have a nice day
It happend with me .\015\012this camera was degined to use SD card by max 32 MB or may be less.unless there is a softwear to allow the cam to accept the bigger capicty like SD 1 or 2 GB ... BenQ DC3400 Digital Camera
When I turn on the camera I get the message "memory card is protected (reset switch on memory card). What does this mean? I have a Kodak Easy Share Z740. What do I need to do?
Remove the memory card from the camera, look along the one edge and look for a tiny switch, slide it towards the contacts to unlock the card. the switch in the furthest position from the contacts is in the locked position, Now if for some reason the ... Kodak EasyShare Z740 Digital Camera
Memory card Every time I turn the camera on, the mesage "memory card is write protected" comes up, and I can't figure out how to get rid of it.
It sounds like the lock switch on the SD card is in the wrong position. Take the card out and move the switch away from the locked position and re-install it. ... Nikon COOLPIX 5100 Digital Camera
Missing pictures I recently went on a trip and took some pictures that disappeared from my camera. Later I started getting the message 'Card cannot be read' so I purchased another memory card. I was taking pictures when I get the message 'Card cannot be read'. I turned it off and back on and the missing pictures were there. I then get the message 'Out of memory'. I turn the camera off and back on and the missing pictures are gone again. WHERE ARE THEY???
Hey flowernthe,\015\012 The error message “card cannot be read" means there was and error when the camera tried to access the memory card. To fix this you should make sure you are using the right kind of memory ... Nikon Coolpix 4600 Digital Camera
When I turn the camera on I get the message "memory card error". The only button on the camera which then works is the menu button but it just brings up the screen and then the same error message. Yes, I have replaced the memory card and the first memory card works in our other camera so it is not a problem with the card. My computer also fails to recognise the camera when I connect it via the usb port. Any bright ideas?
You need to format the card in the camera. Go into the menu and scroll to "format" and follow the on-screen instructions. This will erase and initialize the card . To download pictures, the most trouble-free way is to use a card reader and download t ... Pentax Optio S4i Digital Camera
Hi. Last time I went to used my camera the screen showed a message saying the memory card was damaged. When I tok it out I saw that it was slightly damaged on the bottom strip. I have replaced it with another memory card but the same message keeps coming up so I cannot take any photos.The message says: "This memory card cannot be used. Card may be damaged. Insert another card." Any suggestions how I can reset the camera before I pay to put it in for a service?
It is possible that there are bits of the damaged pieces struck inside the card reader contacts in the camera.\012So if you can remove the battery and memory card and tap upside down ,you might be able to retrieve the broken pieces.\012us ... Nikon D40x Digital Camera
My Canon Powershot A560 memory card is locked and it is the camera doing it not the memory stick.And there is nothing in the manual about how to fix it. When I turn on my camera I get an error message"memory card error" then when i press to view pictures it says the memory card is locked and turns itself off. I have had this camera for some time and have never had issues uploading pictures onto my computer or with the memory card.I really would rather not lose the pictures that are on the camer
Remove the memory card from the camera. Note that there is a small slide switch on one of the long edges of the card. Slide the switch to unlock or lock the card. ... Canon PowerShot SD750 / IXUS 75 Digital Camera
When I install a memory card in my camera I get the message read only memory card, remove write protection to capture or write to card. The switch on the memory card is in the correct position, this is a card that I have been using with no problems until now. I also installed a brand new memory card and got the same message. I think there's a problem internally with the camera.
... Kodak EasyShare Z740 Digital Camera
I appear to have lost all my holiday photos due to a crash within the camera when the memory was reading full. Although the camera is not recognising any images on the card It still has a message saying memory full. I have tried to copy the images within the camera memory onto the apparently empty memory card but again the message comes up no images to copy. I know the data is there because the camera will only let me take 12 frames before it tells me that its memory is full. How can I recover t
You can try to get your images if you use an adapter for the memory card that connect to your computer then there is an application that recover files from a memory card \012\012Hope it will help ... Fuji Digital Cameras
I have a Panasonic DMC-FX12 digital camera. Before I left on vacation, I took all the pictures OFF of the camera and recharged the battery. I took only 4 pictures before the error message "Built in Memory Card Full" came on the screen and refused to allow me to take any more pictures. HELP! A secondary problem I am having with the same camera is that I have to turn the ON/OFF switch on and off several times before the lens finally comes out.
You copied all your pictures, but they still exist on the memory card. You need to go into the menu and erase the pictures. As far as the lens not coming out, there may be some dirt in the mechanism. ... Digital Cameras
Write Protect I own an olympus Camedia D-390 and use an xd picture card (16mb) recently I tried to take a picture but when I slid back the cover it comes up with the error message "Write Protect" I have looked in the manual and all it says it that my cameras write protect feature has been enabled by a pc; connect it to a pc and turn this off. Just one problem....How??? I have trid connecting it tothe pc and changing the attributes of the folders;but everytime I take off the "read only setting
What should i do? would u mine pls to teach me sir? ... Olympus Camedia D-390 Digital Camera
Card full. Praktica DC9001. Memory card downloaded to computer and pictures now on computer. Memory card wiped clean. Drivers installed on memory card. When putting memory card into camera. It does not click into place. When camera turned on, the message "card full" is displaced. I am assuming there is a problem with the camera not the card. Any help gratefully received
Hi, You can download it here :\012\012\012www.opendrivers.com/.../cameras-and-mp3-player-praktica-free- ... Praktica SlimPix Digital Camera
The message on the screen of my camera says CARD PROTECTED .i cannot take photos or delete any . Also the memory card will not come out of slot
Card protected usually means the slide switch on the side of the card is in the locked position. To get the card out of most cameras (since you didn't say what your camera is) you press in on the card and it pops out. Sometimes there is a button alon ... Digital Cameras
Message keeps coming up 'Please turn camera off then on again'. Checked battery & memory card ok. Discovered if I point at window (daylight) it will take picture...but not indoors (even though it's bright enough. Is this Shutter or Flash problem? and how can this just happen when I was taking pictures no problem few minutes ago. Camera hasn't had any damage
First off all thank you for posting your question on FIxya and wish you a Happy New Year.Now about the problem. Regarding the shutter its not a problem. You can eliminate this issue by using the "Intelligent ISO" setting on your camera, which a ... Panasonic DMC-FX33 Silver Digital Camera