Having problems with your Panasonic Lumix DMC-LZ3 Digital Camera ?
Can i use a 4 gig card in this camera
\015 I dont want to damage the camera or the card\015
Sorry u won't do use as per the limit stated in the broucher else the camera will take more time and would fail after some operations.
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-LZ3 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My olympus 1030sw camera will not record video to the 8 gig micro sd card (shows over 30 mins record time but only records 10 seconds to the cameras internal memory) my drivers are all up to date and the card i am using is a sandisk 8 gig which is on Olympus site stating it is fully compatibleif i take pictures this is working fine to the memory card so the card is not at fault.
You must have firmware version 1.1 or later for movie photography using 4GB or larger microSDHC card. ... Olympus ? 1030SW Digital Camera
Memory card I HAVE AN S602 FINEPIX FUGI CAMERA, AND BOUGHT AN 8-GIG MICRO MEMORY CARD. THE MESSAGE I RECIEVED WAS THAT IT WAS NOT INITIATED. SO I TRIED TO FORMAT IT, BUT RECIEVED AN ERROR MESSAGE. IS IT POSSIBLE TO USE THE 8-GIG MEMORY CARD IN MY CAMERA? YOUR HELP IS MUCH APPRECIATED. THANKS. BILL
Because this camera only understads FAT16 formatting, it does not accept any card larger than 2GB so your best bet is to use the current crop of standard 2GB CF cards, most newer ones (usually 16X and faster) are alsa fast enough for continuous VGA v ... Fuji FinePix S602 Zoom Digital Camera
I have a Sanyo Xactiphoto and video camera. I fear I have lost 8 Gig of pictures, however, it may be there but I am not accessing it correctly. I know I used up all the memory and I get a message on activating the camera telling me something like 'star two the internal memory". Is it possible that the card is full and the camera has reverted to the internal memory? If so, how do I retrieve the data on the card? Thanks. Nick
You can check the contents of the card by inserting it into a computer's card reader (cheap to purchase if needed). This will confirm if there is any data on the card. ... Sanyo Digital Cameras
My Lumix DMC FZ30 use to work using a 4gb SDHC SanDisk card, but now says, "Memory card error please check the card". However, the card works fine in any other cameras. A small pocket Fujifilm camera for example. I was told to reformat the card in the camera, but I'm unable to use any part of the FZ30 camera while the card is inserted and on. Please help as I want to use my 4gb card and not just the 2gb ones which work fine so I know it's not a problem with the camera reading memory cards, just
Memory cards have a limited life. If you've been using it a lot and erasing it or formatting it, it probably is just worn out. Take it to a camera shop and try a new card. If that works, go to a discount store and buy a new one. It will cost less ... Panasonic Lumix DMC-FZ30 Digital Camera
Video duration I have a GE A835. I want to take video. It shows that I can only take thirty minutes with a 1 gig card. The only thing that I can think of is that there is some reason it is putting the files on the camera memory instead of the card. I have used all the settings I can find to put video on card. I know that it has to take longer than that. My PHONE will take 14 hours. I would be happpy with less quality for more time. HELP
... General Electric A835 Digital Camera
I have Kodak EasyShare cameras CX6200 and CX6330. I have been using San Disk 128 MB and San Disk 64 MB SD cards. Recently, I purchased a San Disk 4 GB SDHC card, but it is not getting formatted and I am unable to use. Please advise. Can I not use SDHC card in my cameras? What maximum capacity SD card I can use in my cameras?
Correct. You cannot use SDHC cards in the CX6200 and the CX6330. SD cards max out at 2GB. ... Kodak EasyShare DX6440 Digital Camera
I have a fujifilm s1000 fd and i used a card reader to download the pictures from my camera(i specify that i have a SanDisk memory card), because i can't download them using the cable ,it just downloads some pictures and after that an error appears and everything blocks. i have gone used to that but recently i tried to put some pictures and movies that i taken with the camera back on the memory card using the card reader but the camera just doesn't reads them. Can i solve this problem? If not c
Your computer and your camera use different operating systems. If you try to put pics and videos on a card using the computer and then try to play it in your camera, you take the risk of corrupting the card and the camera. Also, if each time you remo ... Fuji FinePix S2000hd Digital Camera
Can i use a 4 gig card in this camera
Sorry u won't do use as per the limit stated in the broucher else the camera will take more time and would fail after some operations. ... Panasonic Lumix DMC-LZ3 Digital Camera
JUST USED MY CANON 950IS FOR THE FIRST TIME USING A SANDISK ULTRA II SDHC 4GB CARD. DOWNLOADED FIRST PICTURES ONTO LAPTOP USING THE MICROMATE WHICH CAME WITH MEMORY CARD. WHEN I'VE PUT THE CARD BACK IN THE CAMERA, A MESSAGE COMES UP ON SOME OF THE IMAGES 'INCOMPATIBLE JPEG'! THE IMAGES ARE STILL THERE ON THE CARD BUT THE CAMERA DOES NOT SEEM TO WANT TO READ AOME OF THEM. IS THIS A CARD OR CAMERA PROBLE ??
Sounds like a card problem. Did you format the card in the camera when you first got it? If not, recommend formatting it using the camera. Look for the format option in the camera's menus. Note that this will also erase all images from the card, ... Canon Digital Cameras
Hi. I have a Premier Digital Still camera who does not recognize the card , I got the camera without the card, so I bought an SD card and I entered. camera is not new. when I opened apear the message, "this card can not be used". I tried to format my card. mention that the card works in another camera canon. so the problem would not have the card. I can not find anywhere the option of formatting the device menu. please give me some advice. Thanks. please excuse my mistakes. I used google trans
The problem is that your camera is only compatible with SD cards, not\015\012SDHC cards. You bought a larger card for your older camera, not\015\012noticing that it was SDHC (or not knowing that it mattered). The new\015\012card doesn't work, not bec ... Premier Electronics DC3A30 Digital Camera
I have a brand new PNY Optima SD card I wish to use with my easy share camera. When I insert the card into the camera it says the memory card requires formatting, then continues to say formatting will delete everything on the memory card. It repeats and WILL NOT FORMAT. I cannot even get to the MENU to format the card. I am not concerned about getting pictures OFF the card - the issue is that I cannot format the card to use in the camera. Yet my Kodak manual says I can. Why won't the camera form
Hi Mr\015\012\015\012Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com\015\012\015\0122\015\012O ... Kodak EasyShare C875 Digital Camera
Neither the fujifilm 256MB xd card nor th enew Olympus 2GB xd card will work in the A340. I've put the card in and went to Format it in the camera as per teh menu. It acts like it does but when you take a picture it says "write error" When you turn it on again it still says "card not initialized." I've tried formating them with the camera on (lens cover open) and using the menu and with the camera off (lens cover closed powered on using the button on the back) and using the menu from that screen
The camera needs to be up-dated to read the cards it may still have the old dater in it! so it cant "see" the biger cards ... Fuji FinePix A340 Digital Camera
I am attempting to use "Eye-Fi" connect /x2 with my canon 5d. Since my camera accepts CF cards I am using the SDHC EYE-FI card in a SD/SDHC CF ADAPTER. (SDCF-01). When I insert the SDGC Eye-Fi card into the adapter and load ithem into my 5D, the camera first seems not to be reading the card and then gives message, "Card not formatted". When I attempt to format the card in my 5D, I get the message "Cannot format card". I formatted the card in my computer and again tried to use it but the messa
... Canon EOS 40D Digital Camera
Hi.....i am havimng a problem with my memory card PNY Optima SDHC 8 gb class 4......i have been using it in my sony camera....its was working fine at the start but recently after when i inserted the memory card in my camera it say "system error" or "error formating memory card".....i tried other memory cards in my camera and it worked..so i thought to formating my card using my camera usb cable but when i inserted the cable to my pc it says your disk is in read only format and make sure its ch
You will most likely find that your camera will work with cards up to a certain capacity e.g. 2gband not with cards of higher capacity. What this means in effect is that high capacity cards are not compatible with your camera. It would be inter ... Digital Cameras
I attempted to unlock a 1.0 gb camera card today which has been locked. After attempting to unlock it using a utility knife (since the lever was missing) I gave up after trying to load and reload the locked card. Then when I reinstalled the other card (same type which was unlocked and in use today. This card now is unusable with the same message showing on the camera screen. Yet another card that is also unlocked was used and the same message again. I now cannot shoot photos since all three card
Hi there.Turn the camera on and go into the setup menu, look down the list for "reset" and reset it, then try another camera card.Please post back the results.Good luck and thanks for choosing FixYa!! ... Canon Digital Cameras
I took a whole bunch of pictures and several videos on my Samsung S630 camera with a 512 MB memory card in it. Using the camera, I can easily review the pictures and play the movies back on the camera veiw screen. When I try to copy the files onto the computer, they copy over, but I can not view any picture and the videos do not play. I have used this camera for a while, and have not had this problem before. I used it this morning and copied the files over using a 6 in one USB card reader and al
... Samsung Digimax S630 Digital Camera
My Canon SD 870 Camera came with a free SD card. Everything seems fine with the card until I try to download the pictures to my computer. I used the camera to format the card after the first time I had problems. I assumed this would fix it but it has happened again. I don't have problems with my other memory cards, just the one this camera came with. I can view the most recent pictures using the camera but how do I transfer the pictures to my computer? Thanks.
How are you transferring pictures with the other cards? Are you using a\015\012USB cable and plugging the camera into the PC? If not, how are you\015\012doing it. Let me know the answer... I have some suggestions for you.\015\012Regards,\ ... Canon Digital Cameras
When I put the memory card in the camera it says 'cannot read' it. How do I format the card? I know it has the right 'size' memory. The memory card I am using is the same one I used a few months ago and I saved the pictures I took to a computer and erased the pictures off the card. Now as soon as I turn the camera on it says 'This card cannot be read'. Im frustrated as there is nothing in the manual that seems to get my camera working again. I have only had it for a year. Please HELP!
Do not use the computer to erase the card. This is the reason your camera no longer recognizes the card. Now you need to format the card in the camera to get it to work properly. ... Digital Cameras
Memory card I love my Gateway DC-T50 but the card fills up too quickly.I have a Kodak SD 256 MB memory card and want to get a bigger one.So I went and got a 2 GB and installed it , the camera screen said This card cannot be used. I took it back to the store and the clerk said it was probably too big because I have an older camera. So I exchanged it for a 1GB and it shows the same error message. My question is; what is the biggest memory card this camera can use? I have misplaced my manual, or I
Try a 512mb because your camera could be older then the 1 and 2gb memory cards can handle...or depending on where you are..you could take it to Best buy and they could tell you...hope it helped =) ... Gateway DC-T50 Digital Camera
Memory card the card that came with the camera is a 16MB. it doesn't take pictures without the card. the 16MB card wouldn't stay in the camera. so i bought a 1GB card. that wouldn't stay in camera. for some reason, now the 16MB card will stay in, but not for long. but the camera still says it cannot use the card that came with the camera. should i buy another small card. or give up. if it won't take the card that came with the camera maybe, its the camera. thanks
Its an sd card right?\015\012because if its a bigger square Compact Flash Card you could a bent pin.\015\012I wouldnt buy another car if you have a new one and they both give the same error.\015\012I would suggest takeing it to a re ... Konica Minolta DiMAGE Z10 Digital Camera
I have a Kodak easyshare Z740 camera.....looking to get another memory card....how big can I get? I bought an 8 gig kodak memory card at CVS and the camera did not recognize the card to initially format it? not sure what to try next, i returned the 8 gig card thinking it was too big for that model camera. ideas?
I believe that your Kodak Z 740 is designed to use the 2 GB SD/MMC cards, only.. ... Kodak EasyShare Z740 Digital Camera
I have a Pentax K 100 D. I have tried using a Flash Memory card (a Sandisk Ultra 16GB) but without success. The message 'Memory Card Error" is displayed even before I could format it. The card had previously been used to store files from my PC (where it worked perfectly) but the camera could not format it even after I had removed all the files etc by reformatting it in the PC (FAT32). Is there any way I can get to use this flash card in my camera?
Hi Doc.SD cards different in size use different technology. there are design changes introduced at 2GB and 4GB that makes cameras not compatible with all cards.When this camera was introduced, it was compatible with cards up ... Pentax Digital Cameras
I normally use a small 32mb memory card in the olympus D-390 but used an olympus fe-130 over the holidays with a 256mb memory card. I do not have the usb cord for the fe-130 so I put the 256mb card in the d-390 camera and plugged it into my computer to load up my photos but I get a blue screen on the camera with options of Power off or format. Is the card too big for the camera? it works fine in the other to let me take photos and view them, if I had the cord for it or went to a store to print
Many cameras will not read cards written on other, different cameras. There should be no problem taking the card to a store and having the pics printed or put on a disc. Or get a cord for the 390, or a card reader for your computer. ... Olympus Camedia D-390 Digital Camera
My Nikon digital camera model E7600 displays "This card cannot be used". I haved taken pictures and used this card with no problem. This card was not removed from the camera and was working fine when this message came on the screen.I tryed a new card and got the same message. What must I do to make the camera work properly?
I think there is some problem with your cameras memory card slot. this can be also due to the card lock status that is not getting back to the normal state. do you lock card sometimes while using it to prevent accidental delet ... Nikon Digital Cameras
Ihave a Pentax *ist DS camera with which I use a SanDisk Ultra II memory card. I have recently bought a SanDisk Extreme III Secure Digital Card (SDHC) CLASS 6 Micromate card which does not work in the camera, please coud you advise if it is possible to use both these cards in the camera? Many thanks. Jill Poppleton
According to this site\015\012\015\012http://www.sandisk.com/Assets/File/pdf/SDHC%20Compatibility_2007-02-15.pdf ... Digital Cameras