Having problems with your Panasonic Lumix DMC-TZ1 Digital Camera ?

Panasonic DMC-TZ1 After switching on the camera Zoom will not work. i.e. stuck at wide angle. The screen says' remove lens cap and try again' After repeating that suggestion several times it will still not work. is this a warranty problem( I still have some left) or is it something I can fix?


Answers :

I just had this problem, too. I basically disassembled the camera by removing the back cover, front cover, and top assembly. The top assembly includes a plastic part between a circuit board and the top external metal piece that houses the button on the top of the camera. On the circuit board there is a switch for the zoom that looks like a pinball flipper. You have to make sure that it's working properly and you may have to remove the metal dust cap and remove any sand if it's lodged in the mechanism. It's pretty tough if you're not good with your hands because it's extremely small. I did this and the zoom began working like normal again, but then I got the message that the camera needs to be turned on and off every time I turn on the camera...
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-TZ1 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Panasonic DMC-TZ1 After switching on the camera Zoom will not work. i.e. stuck at wide angle. The screen says' remove lens cap and try again' After repeating that suggestion several times it will still not work. is this a warranty problem( I still have some left) or is it something I can fix?


I just had this problem, too. I basically disassembled the camera by removing the back cover, front cover, and top assembly. The top assembly includes a plastic part between a circuit board and the top external metal piece that houses the button on t ... Panasonic Lumix DMC-TZ1 Digital Camera

Shutter will fire intermitantly on Canon 40D. It focuses but will not fire but if pressed repeatedly it will fire after several shutter presses. I have changed batteries, I have swapped to other lenses (including a Canon lens) but still have the problem. Any suggestions or does this go back to Canon ? : (


A Canon camera mechanic told me that on the 40D this is caused by the rubber part under the shutter button not springing back quickly enough, at least that was how he described it. It's a simple matter for a camera tech to fit a new one. I go to Whil ... Canon EOS 40D Body Only Digital Camera

3 times i've the same problem with my camera, 3 times they've sent it back. The problem still exists. A new battery, properly charged by me, the camera takes between 1 and 5 photos and then the camera goes dead. I was told by Canon that the battery lid on the camera was causing a short, they said 'Problem solved.' Nope, the problem is still there and i've run out of extended warranty. Please, please help.


Lemon law with company and replacements normally work in sets of 3. Now that you have had them send you the same type of camera, and the same problem has occured 3 times, demand that they replace it with a comparable or camera of greater value. Wor ... Canon Digital Cameras

My Kodak C913 sometimes follows switch on with the statement memory card needs formatting. I have tried to do this several times but to no avail. I am then faced with a message which says that I should use a new card. I am now on my third card and I still get the formatting message. This does not happen every time I switch on but about 8 times out of ten. the other 2 times the camera works well whilst it is still switched on. When I switch off the problem re occurs. There is nothing wrong with a


First of all, stop putting your cards in another camera....this can corrupt the card. With no card in the camera, go into the menu and find "reset"...follow the on-screen instructions. Insert your card, turn on the camera and go into the camera menu ... Kodak EasyShare C913 Digital Camera

Bad Battery My DIgimax 530 has had battery problems for some time now. I know that this problem has not been like this forever. When I put a new battery in, it uses it quite quickly, then says low battery. The only problem is, when I test the batteries with my battery tester, it says that they are partially full (still in the "good" zone). I am just a kid and don't have much money, I use it for the video feature. It's warranty has timed out, Is there a simple solution?


Hi there,\015\012\015\012This isn't a 100% solution but it did help. I have had this camera for about 5 years now, and about 3 years ago the "low battery" signal kept appearing on my screen, it got to the point where it would just come o ... Samsung Digimax 530 Digital Camera

When I click on the download button, I get this message: "There is a connection error. Please check the troubleshooting guide in the user's manual." The troubleshooting guide suggests that I uninstall the PLD-822 driver and reistall it to solve the problem. I have tried this several times, but each time I try to download my photos I get the same message. I think the basic problem is the sticker on the binoculars "Made in China".


Hi, I have experienced this many times with various USB devices, they can be finicky little things. Try doing this procedure below.\015\012\015\012We need to remove and reinstall all USB controllers, and "Zero" the system..\015\012 ... Digital Cameras

Panasonic still camera DMC TZ5 I had taken three frames without trouble. Went to take the fourth frame. Camera would not take. Camera told me to turn it off and then on again. I did this several times, Doesn't work. Clerk at store told me to take out battery and memory card and to leave it for 24 hours. I repeated this several times. It did not work. I phoned the panasonic number that was given to me by the store. It's in Jamaica! I could NOT understand him because of his very thick accent.


This is sometimes a lens problem. Try these:\012\012Fixing a Lens Error on a Digital Camera\012\012Th ... Panasonic Digital Cameras

Dgs-200 Problems after time out delay the camra goes to E0001 or E0002,E0003,E0004,E0430 I have seen several different codes but some times it still takes pic's. Last weekend when it got dark it started taking pic's every 60 seconds. but when I looked through the pic's it only showed around 20 pic's and I was in my tri pod watching it and it had to have flashed 100 times. any ideas


Any number preceeded with E is showing # ofEvents, not an error code...scroll thru setup to get erase all pics NO..press select no should flash, press select..done should show..next up button press should give erase all events; select;up or down butt ... Moultrie MFH-DGS-100 Digital Camera

Screen on hd1a goes green and camera freezes when ending a movie capture. Tried several cards (all sdhc). Still images store fine - problem only occurs with video. It began as an intermittent problem but happens all the time now. Camera appears to be operating normally until you end the capture.


It seems like the firmware need update. You don't need to replace anything just check with a Sanyo repair guy and upload the firm ware. that should fix the issue.Also let me know if the issue comes up even when you are taking small clips or it ... Sanyo Digital Cameras

The battery for my z33wp won't charge anymore. It has only been fully charged 3-4 times. The camera's fine because with the little bit of battery left, it still worked perfectly. I don't know if the fault is with the charger or the battery. I'm still just about covered with the 6 month warranty, but im just wondering if this is a common problem. Would purchasing an alternative battery and charger be a good idea?


HelloThank you for using FixYa for your problemAlways check the batteries first but if is it still giving the same fault, your camera is faulty. It should be taken to an authorized repair centre for a repair ... Agfa FUJIFILM FINEPIX Z33WP Digital Camera

Hi there I have casio EXLIM ex-7270 thge problem is the red signal aways blinking I try to revome the battery several times but the problem still there cant use pls help thank you


... Casio EXILIM ZOOM EX-Z60 Digital Camera

I have a KD200. After taking a picture, the image comes out very dark or black. I've already had it repaired for this problem 3 months ago and now it's doing it again!! Pentax never did explain on the work order what the problem was (it was still under warranty at the time).


When sighting a picture, press half way to see how it will look. Adjust the +/- level to get the proper amount of light. ... Digital Cameras

Hi. I have a Canon G9 camera. I bought in October 8, 2007 but did not register the camera's warranty until a few days ago. Here's the problem. I dropped the camera a weeks ago... Everything was working fine, no problems. After I bought an extra battery I tried turning the camera on but would not power up. In fact will only power on if I insert and remove the battery several times. Once I get it going, however, it powers off with the lens extended. Please tell me what my options are, s


Hi Cacy,\015\012I don't want to offend you, please don't take it that way, but since your problems began with the addition of the new battery... I have to ask the question. Are you absolutely sure you bought the right battery for your camera? ... Digital Cameras

My kodak easyshare MD853 digital 8.2 camera has some problems.. When I turn it on it says: lens error message 122,1,0,0 and the zoom will not retract back into the turn off position.. I called Kodak & it's still under warranty however they say if it's something that not under warranty they will charge me anyway... I bought insurance through Target as well & they referred me to kodak. Does anyone have any suggestions on how to fix my camera?


My camera i dropped it and it was off and i waiting a few minutes and then picked it up and tried to turn for a photoshoot and the dum camera wont work now it says a lens error and it wont come up or anything, so i dont know what i should do ... Digital Cameras

Fine-Pix A400 is showing Focus Error and will not allow photos to be taken. In addition, the lens will not retract when the camera is shut off. This problem occurred after using the zoom procedure several times to obtain close-up shots. The camera has worked perfectly up to this issue. Can you suggest any solution to problem? Many thanks...


Here is a quick fix to try. If you attempted to remove the focus error doing the 3 times on and off, and it didnb't help to this. Power the camera on, you will hear the gear skipping as if it is slipping. Right at the moment you turn of the camera pu ... Fuji FinePix A400 Digital Camera

I take a few shots and get the Error message 30 on my 50D- Always need to shut it off and then back on. Since I did soe net surfing, and since the camera makes a clear noise whn it goes into error mode, I am thinking it is surely a shutter problem. Anyone there confirm that it is a shutter problem? Note I was using a Sigma Lens at the time, so the little boys at my local shop are saying it is "not" the camera...of course it is still in warranty. I am looking for any HELP or ADVICE! Tony C


HelloThe problem is that the lens has become stuck in the barrel\015\012 after dropping it. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a professional.Use\01 ... Canon Digital Cameras

Dear Sir/Ma'am, I have a FS100 SLV Canon Video Camcorder. My charger does not work So I need to order a new one. I went to the local Canon Repair shop and ordered the part after they confirmed that was my problem. That was several months ago and still nothing. I have followed up several times. I would like to order on line and have a new one shipped to my home in Manila. Thank you for your advise about where I can mail order the part I need. Please send address information about how I can b


Hi,You could order it from :-https://www.cellularfactory.com/camcorder/CANON/3/73398/They also have options to send it to Manila.Let me know, if needed further assistance.Hope i helped you. ... Digital Cameras

Polaroid i531 I purchased a polarioi531 (white) about 1 year ago every since i have had it , it has been nothing but a headache, the lens gets stuck and you have to fix this yourself, i have had to do this several times , on the last try the lens would not retract on the outside but the inside one did , as i was trying to fix this problem the inside lens came off and the outside one is still stuck out, i contacted customer support and they have informed me that since i tryed to fix the problem m


Thank god some one beleaves polaroid is **** too. ... Polaroid i531 Digital Camera

I have a Sony Cyber-shot DSC-W350 and i love it...except for one problem. Several times during taking photos, it comes up and tells me to "reinsert the memory card". Any suggestions why?


Proove with a different card. if its possible with a little cotton stick and alcohol clean the internal countct of the crd(without batterie in the camera.) if the camera makes this problem with another card..the problem is in the intenal card reader ... Digital Cameras

When I turn the power on my Sony DSC-P200, a message comes up "access" which fades out. Then it clicks several times and then another message pops up saying "turn power off and on again". I get the same sequence when I turn it off and on again. Any suggestions on correcting the problem?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Sony Cyber-Shot DSC-P200 Digital Camera

I have dissembled the camera many times (yes, I void the warranty, I know) to rectify the unalingment of the 'lens extension' mechanism or whatever you use to describe =) After solving this however, I still thought it nescesarry to replace the lens. I have several filters for fleuroscent photo taking which I wish to install but I just could not get to the blasted lens. I figured I must have to dissemble the LCD screen to access the lens, but would like to know if this is permissible, seeing the


Google the words "disassemble a digital camera" for some good advice and pictures of how to do it. ... Kodak EasyShare C513 Digital Camera

ACCESS??? When I turn on my camera, I get a blank screen that says "Access". The lens moves in and out several times on its own and then after a moment, tha camera beeps and says to turn off and on again. I've done this...the problem still exists!


1. Please make sure that you're using a fully charged battery.2. Please try Initializing the Camera. To initialize the Camera.First, press the Menu button on the Camera to display the Menu items.Then, select the SETUP option under t ... Sony Cyber-shot DSC-W70 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

I have had my camera about a year and have used it in a variety of settings - it has always been great. About a month ago, i started having focus problems. I checked the settings, even reset to default settings, cleaned the lens....9 times out of 10 it still wont focus. To the best ofmy knowledge it has not been dropped or damaged in any way. any suggestions?


Have you cleaned the contacts on the camera body and lens where they meet with a cotton swab lightly dampened with rubbing alcohol? ... Nikon COOLPIX P80 Digital Camera

Faulty d40x hi i bought a d40x off ebay the other day and couldnt wait to start snapping.... problems: - The error message "initialization error. Turn camera on and off again" appears. Upon turning the camera off and on again, the same message appears. After several times trying it still does not work. Also, the menu screen appears, and just keeps flicking from menu to menu constantly. As well as this, on the playback mode, the picture of the image displayed keeps zooming in as far as


I would start by looking at all of the push buttons on the camera. One may be stuck down. ... Nikon D40x Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4113 seconds