Having problems with your Panasonic Lumix DMC-TZ3 Digital Camera ?

Lens will not react when camera is turned on. Message on LCD screen says to turn camera off then turn it on, no effect.


Answers :

Try blowing compressed air around the lens mechanism. then slap it a few times fiormly in the palm of tour hand repeat this 10-12 times This is not a joke it is a Canon fix that they charge you $90 for

sometimes dust stops the lens from retracting propely and so the camera will not reset to start.
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-TZ3 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lens will not react when camera is turned on. Message on LCD screen says to turn camera off then turn it on, no effect.


Try blowing compressed air around the lens mechanism. then slap it a few times fiormly in the palm of tour hand repeat this 10-12 times This is not a joke it is a Canon fix that they charge you $90 forsometimes dust stops the lens from re ... Panasonic Lumix DMC-TZ3 Digital Camera

When turning on the camera it makes strange noises (autofocus motor is trying to adjust) and the LCD-screen stays black. When turning off the camera the same noise sounds and ths LCD-screen says "lens error" I have tried taking out the battery for more than 24 hours, didn't work!


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Casio Exilim EX-Z77 Digital Camera

I own a Kodak V530. It won't accept the memory card. The LCD screen says memory card requires formatting. What can I do to get it to work with memory cards. This message come on the LCD screen when I turn on the camera.


What you need to do to get the card to work is you need to formate it to your camera. On the link below on page 4 tells you how to formate to your computer.\015\012\015\012 ... Kodak Digital Cameras

I purcahsed a new canon SLR 7D and have an error message on the LCD screen E30. instructions says to remove battery pack or turn off the camera but it seems its not working at all. i have tried so many times but the error message keeps appearing on the LCD screen. What can I do?


According to Canon's Knowledge Base here, this error means that there is ... Canon Digital Cameras

Lens Jam My G6 turned on accidentally in its case and the lens tried to extend but was forced to stop. Now, when I turn the camera on, the lens makes a ratcheting sound and gets halfway before stopping. It beeps and says "LENS" on the top LCD screen, before powering off. I've been quoted £160 just to have it looked at which is half the value of the camera! Does any one know how to open one of these up (safely) and what to do when you get inside to fix the problem?! Many thanks


Did u ever get this problem sorted, as I am having the same issue now. But mine just did it one day after turning it on ... Canon PowerShot G6 Digital Camera

Hi, I have two Cannon 40D Cameras and am experiencing problems with both at the moment. One Camera is very slow after pushing the button to take a photo. I have checked all of the batteries and this is not the problem. The other camera will take 4/5 shots without a problem then as I am taking the shot I feel like the camera flutters, the lcd screen shows an error symbol and says the contacts between the lens needs cleaning. When I turn the camera on and off it fixes the problem temporarily but i


Problems like these can be addressed by Canonusa.com which can be contacted at 1-800-OK-CANON.\015\012 ... Digital Cameras

I bought a new canon 50d in july and used it through the summer sporadically in preparation for an overseas trip. Periodically got an error 30 message on the LCD but always ok after turning camera on/off. In India for 3 weeks in Oct. Got the error 30 screen 4-5 days a day during heavy shooting. Internet says error 30 is shutter problem. Does camera store (Ritz Camera in DC) fix this? Camera is barely 4 months old. What should I do? Please keep explanations simple since I am technology challenged


Sorry about the trouble you're having with the camera. I searched the manual for error code 30, but I found nothing.You could try Ritz, but I think you'll find they're probably not set up for repairs. Since the camera is less than a yea ... Canon EOS 50D Digital Camera with 28-135mm lens

The camera was working fine. I imported the pictures to Picassa succesfully and turned the camera off. I then went to take new pictures and all I get is a black LCD screen and when I load into Picassa the pictures are all black. The camera seems to work well, zoom, flash menu all seem normal except there is no picture. Can it be fixed and would it be cost effective?


The CCD is bad or the Iris is shut stuck. If it's the Iris just stuck, it might just have moisture - leave the camera in a dry place for a day. If it's the CCD - pretty much "kiss-it-good-bye". To replace the CCD is expensive - get a new camera. ... Digital Cameras

Faulty camera Turned on camera , and theres a black ink like mark under LCD screen. None of the features on the camera now work.When camera is of you can still see this mark very faintly LCD screen is white when turned on , black mark takes up left side of screen and is very very slowly getting bigger. Could this possably be a leak of some sort? Thanx Matt


LCD is damaged and needs to be replaced. The cost of replacing is less than buying a new camera. If they charge more than 50 of the cost buy a new camera. ... Kodak EasyShare DX4530 Digital Camera

When I turn my camera on, the screen remains black and says turn power off and on. Upon doing so, when i turn it on again, it begins beeping and says turn power off and on. But if I go to the view pictures screen and back to the "take" picture screen the screen just stays black and says turn power off and on


Hi, \012 \012 Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolv ... Sony Cyber-shot DSC-M2 Digital Camera

My camera's LCD screen doesn't show the picture on the screen when camera is turned on, however you can see the picture once you turn the camera off and just want to view the picture. Also, the camera won't keep the picture on the screen to view past pictures, and reverts to turning the camera on and the lens zooms out.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Sony Cyber-shot DSC-W100 Digital Camera

Flash broken,lens stuck i turn it on and the camera clicks and it sounds like the lens is detached from what useed to move it. its says "acess" then black screen then "Turn power off and on." i think its forever broken.. :( flash broken,lens stuck i turn it on and the camera clicks and it sounds like the lens is detached from what useed to move it. its says "acess" then black screen then "Turn power off and on." i think its forever broken.. :(


I have the same problem...so do you think that it's so expencive to repair?? ... Sony Cyber-shot DSC-W55 Digital Camera

Err 02 When i switch on the camera the EOS appears on the lcd screen other than that it is blank. After a while an error 02 appears (CF card fault). I have tried previously working cards and they all do the same. The manual says re-format the card but as the lcd screen is blank, this is not possible. The battery is fully charged. Is this a problem with the camera or the card.. My gut feeling says it's the camera.. Please help, Thanks...


Hi,If we talk about Error 02 - This error occurs when image data cannot be written to the CF card.\015\012This error can occur when the CF card is not fully seated in the camera\015\012or if the 350Ddoes not detect a card-ready signal wit ... Canon Rebel XT / EOS 350D Digital Camera

Hi, I have a camera, a Sanyo VPC-T1060 and it's having some problems. It turns on, flashes, takes photos apparently, but the LCD screen won't work. It turns white when I turn it on and when I take a photo with flash black lines appear all in the photo. I've tried finding a reset button, but nothing has been found. As I said, it takes photos, but I need the LCD screen to take a photo so I can see if I messed up and should take more. I'm a photographer and I got this camera as a side kick to my DS


Try to remove the memory card if used, and blowing out the connectors in the camera cavity with compressed air (to remove dust if any).\015\012\015\012Make sure the contacts are clean. If necessary try another memory card.\015\012 ... Sanyo VPC-T1060 Digital Camera

A85 camera LCD shows up with pink and black lines every time a picture is taken. LCD screen displays the camera icons on LCD screen but will not take anymore photo's. Lens used to view picture status prior to photo shot but now, it consistently shows up in black. When a picture is shot, the screen then turns pink and black on the LCD screen.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A85 Digital Camera

My Nikon coolpix S10 camera was dropped and now the screen only says "lens error". If it is not touched the function returns to normal (has done so twice), but now the screen only say that one message and you can't turn it off or do anything). When it was turned off again and then turned on after a series of clicking noise the screen only said "lens error" and does not allow any other options(even turning off). Any helpful ideas would be apprecited. Thank you!


Hi,try this out it worked for most of them who had a similar problem like urs:Gently tap it twice at the end of the camera to ur plam and it will work again.just tap it very lightly against the bottom of the camera holdi ... Digital Cameras

When the camera turns on the lense moves in and out and makes a buzzing noise untill it says lens error on the lcd screen


Try the procedures in this tip. ... Nikon COOLPIX L3 Digital Camera

Hi, my camera says Lens Error 301, it opens just fine when I press the start button and I can even see on the LCD screen on the back, but it turns off as soon as it opens! I just opens and closes


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Kodak EasyShare C140 Digital Camera

Casio ex-m2 My camera turns on, but will not record with or without the sd memory card installed. the flash will not even come on. the lcd turns on, and the exilim start up screen appears, and then the scene where the camera is pointed to shows up on the lcd screen. when i depress the shoot button, nothing happens.


Does the Camera have internal memory?\015\012I think you need the card it to get any where\015\012Check out the manual ... Casio Exilim EX-M2 Digital Camera

Camera V603 When I turn on the camera the lens retracts and the lights come on green then turn red and the lcd screen has a white screen with the kodak label and then lens closes and camera turns off.


The camera should be brought to a repair shop since it might be a mechanical problem or parts may need to be replaced already. ... Kodak EasyShare V603 Digital Camera

When i turn on my camera the green light continues to blink then i sometimes get a black screen that says "lens error, restart camera" on the bottom of the screen. I cannot turn the camera off unless I take the batteries out or wait and it turns itself off


Remove battery and reset when you switch on tap on the lens hood several times. Listen if the jammed motor releases if not repeat again . It there is no result then wee might need to open the camera but only if your are equipped and have experience w ... Canon Powershot SX110 IS Digital Camera 9.0MP

My K7 will turn on but the LCD screen and monitor won't turn on. The only thing that shows up on the LCD screen is the battery button. When I try to take a picture it makes a funny noise. I didn't drop my camera or anything and it worked perfectly yesterday. The only thing is that I did charge my battery overnight. It still turned on normally earlier in the day but then I didn't take any pictures (as my daughter wouldn't look) so I turned it off until a little bit ago when I turned it on and dis


... Pentax K7 Digital Camera

BROKEN LCD Today, I had my camera in my camera bag. Somehow, the screen got busted. I took out my camera to take a picture and the entire full screen view is cracked. The camera turned on and off just fine; it seems that only the screen was damaged. No images are shown when I attempt to look at the pictures I took and when I try to take a picture, I cannot see anything on the screen. Is the screen repairable or is it best to purchase a new digital camera?


It is repairable. there are service centers around that can change just the screen for you. ... Polaroid i737 Digital Camera

Dark screen When I turn on my camera the lcd screen appears dark, although I can still see pictures and things on the screen, they are barely visible. This happened randomly when I turned my camera on a few days ago. I have tried adjusting brightness but nothing changes the screen remains dark...what should I do? :(


Please check your user manual. There is an save mode. Leaving the save mode will solve the problem.\015\012\015\012If you need more help please advice. ... Sony Cyber-shot DSC-W50 Digital Camera

Canon s2IS when I turn the camera on in review mode the LCD screen displays pictures one after another. Cannot stop the picture review except to turn off the camera. In camera mode the menu button and other buttons do not function. The problem occurred while I was pressing and holding down the LCD review button and viewing hundreds of time-laps pictures I had taken with the camera.


Hello,\015\012Please do the followings.\015\012\015\0121. Turn off the camera.\015\0122. Remove the memory card.\015\0123. Remove the batteries.\015\0124. Wait at least 3-5 minutes.\015\0125. Place the memory ... Canon PowerShot S2 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4825 seconds