Having problems with your Panasonic Lumix DMC-TZ3 Digital Camera ?
My lense does not go in when I turn off the camera or when I remove the battery
This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.
A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have a canon powershot A470 and it fell in water. after i removed the card and batteries of which still worked and neither were wet, i let the camera dry for a couple of days. it has turned on since and the screen would come on and show me the pics on the card but it kept turning itself off and the zoom lense would go in and out on it's own. now, i can't get the camera to turn on and the zoom lense it stuck. any ideas??? or should i call it a wash. i really love this camera!!! Theresa
I submerged my powershot for a couple of seconds. it did get completely wet. it was acting very strangely: the lcd wasn't working, the little orange light on the front kept flashing, and it took a few tries for the lens to extend.then ... Canon PowerShot A470 Digital Camera
Pentax Optio 555 Digital Camera. Once I have taken a couple of photos in a row, the camera continually flashes red & green. Like it is continually thinking. I cannot then even get the camera to shut down eithout removing the battery or just leaving it until it times itself out. If i remove the battery, I still have to turn it on & then off again to get the lense to retract. Can you help to solve this problem. It does it no matter what the charge in the battery is like. Full or half used.
Hello ... Digital Cameras
My Sony DSC-H50 Digital Camera has the following symptoms. When I turn it on, it appears as if it tries to move the lenses, but they do not move. A message appears on the screen turn the camera off an on again. This does not work. Removing the battery and then turning the camera back on does not work either. I tried initialize and reste the parameters to default, but that does not help either.I can view pictures that are stored on the camera
Http://www.sony.co.in/support/product/dsc-h50\015\012\015\012\015\012\015\012 ... Sony Cyber-shot DSC-H50 Digital Camera
Lense Issue When I turn on the camera the lense started to move out and then got stuck. How when you turn it on it just trys to adjust the lense but again it is stuck. I am required to remove the batteries to get it to shut off. I was going ot open the case but three of the screws requires a nice special allen wrench, but guess what, they did not provide it. Any ideas where I can score one?
Does the screw you need to remove look like a triangle with 3 points? if it does i had the same problem! went to all kinds of repair stores looking for one, turns out that is a manufacturer only tool so that we cant repair them and we have to have th ... Fuji FinePix S3000 Digital Camera
Kodak m1033 lenses stuck 'open'. Camera won't power on, just beeps and turns off when powered on. Camera froze when zoomed out max, removed batteries and now camera is stuck.
Hi, ... Kodak EasyShare M1033 Digital Camera
My Sony DSC-W130 camera when turned off will not turn back on until I remove the battery and reinstert . Also if the battery is not removed it will drain after a period of time. It is like the On/Off switch is not properly turning the device off and as such when you attempt to turn on again the restart function for the software in the camera does not execute properly. I have recently started using soem OEM batteries as well as the supplied SONY batteriers at times. . Maybe this is effecting
It may be a issue with the switch remained in on position ...blocked...or damaged...or ..something with the voltage of the batteries...if you noticed that the changing of the batteries lead to this behavior ..try the old stuff back again ..and see ho ... Sony Cyber-shot DSC-W130 Digital Camera
I receive the same "errr" message. The photo shop said it was a bad contact, they cleaned them with an eraser and made sure there was good contact. Problem was slightly better, but still exists. I have to remove the battery to clear the problem, turning it off and back on does no good. You can actually feel the lense move ever so slightly. Camera has gone back to Nikon for a repair. Very disappointed at this point with this. Camera store acknowledged that they have seen many of these.
My theory is the plastic lens mount is not strong enough to support the lens and maintain a proper connection between the camera body contacts and the lens contacts.\015\012\015\012This problem is widespread and Nikon needs to own up to t ... Nikon D90 Digital Camera with 18-105mm lens
My daughters 7d has stopped working, it is less than 3 months old, what do we do. We have removed the lense, batteries, and cf card, put them all back and depressed the shutter before turning the camera on. We have also allowed for drying time, in case of condensation, we have wiped and connectors, plus we bought the camera, the day she left to go overseas for a year.
... Canon EOS 7D Digital Camera with 18200mm lens
My Dynax 5D will not release the shutter nor will it turn off unless the battery is removed. The access light and the display remain on when the camera is turned off at the switch. All menus and autofocus work as normal, it will simply not release the shutter in any mode or with any of my Konica Minolta brand lenses.
Always use the best quality batteries available, I used some cheap batteries in my compact and had problems but it came good after a while with good quality batteries. Also the automatic lens protector had some grit stuck in it from the beach stoppin ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera
Sony Digital Still Camera DSC-P100/P120 I ran my camera till battery ran dry. Camera lense remained protruded. After recharging, the acess flash came on asking me to awitch off power and restart my camera. This I did but lense will not retract when closing down. The camera charges up ok and I have tried removing battery to solve problem to no avail. Any suggestions. I am considering taking a screwdriver to it to remove back of camera. Please help. Kindes regards John Burleigh, Scotland
HI there,There is definitely some risk here, so take care when conducting the following fixes.\015\012\015\012Repeatedly tap the padded/rubber usb cover on a hard surface with th ... Digital Cameras
I have to remove the battery from the camera and wait five minutes, reinstall the batery and the camera will turn on. If I turn the camera off it will not turn back on without removing the battery, waiting and reistalling it.
Next time you get the camera to turn on, go into the menu and scroll to "reset" and follow the on-screen instructions. ... Sony Cyber-shot DSC-W55 Digital Camera
Panasonic DMC-TZ4 When I switch on I get "Turn off camera and turn on again" message but it does not good. When I swtich off I get "workng hard" noises as if there is an effort to retract the lense but it will not retract unless I turn the camera on again. At that point the lense retracts and comes out again at once; more "hard work" noises and a new "turn your camera off" message. The only way to get the lense into the retrated position is to catych it at the right instant and remove the batter
Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic DMC-TZ4 Digital Camera
Power doesn't work properly. When I turn off camera with power button, lense stays out. When I turn on, the lense goes in then back out again, but after a few seconds, I get the message: "Please turn camera off then on again." If I don't do anything, the camera will turn off by itself, and the lense will go in. Battery is fully charged, and nothing dramatic happened to start this problem...
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-FX8 Digital Camera
My lense does not go in when I turn off the camera or when I remove the battery
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-TZ3 Digital Camera
Lense will not retract. I get an E18 error message. I can turn camera on and off, delete pictures but cannot take pictures. I opened the compartment with the battery, removed it and reinserted it. I also wiped the contact with a clean cloth as advised in the manual.
Hi,Here is a tip that I wrote about How to get a Digital Camera Lens to work againSteps to Repair a Digital Camera ... Canon PowerShot SD500 / IXUS 700 Digital Camera
I have easyshare Z1275 and once I printed pictures on my printer, thezoom lense will not close down and I can't turn it on, even if the battery is removed, it won't shut down. Help. I love this camera,
Hi there..sounds like there might be some technical problem. did you drop the camera? whatever it is, the camera might have gotten a shock and has stopped functioning. Take it to the repair shop and have them check it. ... Kodak EasyShare Z1275 Digital Camera
I fell with the camera. the camera turned on and said lens error. I could not get the camera to turn off so I removed the battery. I put the battery back in and when I turned it on it said lens error
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Nikon COOLPIX S10 Digital Camera
HELP!! I am having a real Kodak moment. I have a Kodak M883, The wall charger says the battery is full but when you put the battery in the camera the camera turns on, the lense extends, battery reads empty, the lense retracts and the camera shuts down.
Hello : \015\012 \015\012It seems that the battery is dead or the battery base is rusty or there's isolation stuff on it . Try to clean the base first . If that didn't help , then I recommend you to replace the ... Kodak EasyShare M883 Digital Camera
I've just bought a new DSLR Olympus camera and fully charged the battery. The camera switches on when there is no memory card inserted but as soon as I insert a memory card the camera won't switch on. If I remove the card and try to switch the camera on it still won't turn on, I have to remove the battery, put it back in then switch on the camera. Any ideas what's wrong?
If this is a brand new camera, it's supposed to work with no problems. Take it back. ... Olympus Camedia C-350 Digital Camera
Samsung L730 My camera appears to be stuck. The lens usually pops out when it is turned on. However, when I turned it off today, it remained out. I tried removing the memory card and battery. Also, it won't turn off unless I remove the battery. When it is on, the screen is black and the usual green light goes off after initially pressing the power button. Is there a way to reset it?
This camera would have to be tested more, but it sounds like a ccd or sensor problem. If this camera was made around the year 2000 or after a bit, then it could be a ccd problem common with many Sony made ccds in this period.A loose conne ... Samsung Digimax L730 Digital Camera
Lens error, restart camera When I turn on the camera, the lens does not open and I get the above message and the camera beeps about 5 times and turns off. Have swapped batteries, removed and reinstalled battery several times.
Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot SX 200 IS Digital Camera
Hello, I have a brand new sony cybershot dsc-w310 camera and its worked great for the first 2 days ive had it. Now it doesnt seem to want to turn on. When you press the on/off button, the green power indicator light turns on but absolutely nothing else happens. When you puch the on/off button again the light does not go out. The only way to make the light turn off is to remove the battery for a minute. The battery is definately fully charged. The camera is brand new and I cant find any tro
You should not have to fix a brand new camera. If the store has a return policy, take it back. If not, use the manufacturer's warranty. ... Sony Cybershot DSCW310 Digital Camera
Power issues. Just recently I've encountered a problem with my camera. After plugging it into my computer (And not noticing the power surge notification on the desktop while doing so). It locked up and powered itself off. I tried turning it back on, and it turned on for a split second then shut off without retracting the lense. I switched batteries and it retracted the lense, but I tried powering it on and the lense only came halfway out and it powered off. I've tried 4 fresh sets of batteries a
You sdaid power surge on the laptop.\015\012Thus suggests that this may have affected the camrera.\015\012I would think a 'repair' if such is possible will be near the cost of replacement.\015\012Only Olympus can advise ... Olympus FE-115 Digital Camera
I have a Canon Power Shot SX120 IS camera. I turned it on and the lens open a portion of the way and I got an error message that say, "Lens Error Restart Camera". I put fresh batteries in it this morning and have only taken about 10 pic's. I turned the camera off and removed the batteries then replaced with new ones but I still get same message. Please advise if you can.
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SX100 IS Digital Camera
My lightly used nikon coolpix s570 has developed a power issue. Meaning that with a fully charged battery, the camera won't turn on. sometimes removing and reinserting the battery will get it to turn on. and sometimes the camera will power up normally, the problem is intermittent. any ideas? I keep the camera clean and store it in a dry place.
If you have a second battery, fully charge it and try it. If you do not have a second battery, it make either be a defective battery or a battery that is not properly charging. Try powering on the camera until you get it powered up, either by reinser ... Nikon COOLPIX S570 Digital Camera