Having problems with your Panasonic Lumix DMC-TZ3 Digital Camera ?
How do i reset factory settings on my dnc g10 camera
Repair Help & Product Troubleshooting for Panasonic Lumix DMC-TZ3 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
How do i reset factory settings on my dnc g10 camera
... Panasonic Lumix DMC-TZ3 Digital Camera
Acer how to fix acer iconia a501 tablet camera focus. It can ONLY take close up photos clearly up to about 10cm. Beyond this any all photos taken are extremely blurred as if the camera is out of focus.I tried resetting the camera properties to default factory setting but this did not help.I downloaded another camera app and this too was useless.How can I set it so that all shots are on infinity focus and not just set to macro shots.CheersJoseph
... Digital Cameras
Every time I turn on my Casio EX-Z75 camera it asks for the date and time and pressing the set button twice did not work nor resetting it to defaults or formatting the camera. Is there a way to hard reset the entire device to factory settings?
Here's the toll-free tech support number at Casio...they should be able to give you an answer:\0121-800-435-7732 ... Casio Exilim EXZ75 Digital Camera
Olympus SP-550 UZ won't focus properly most of the time. Focus point should be infinity since my subjects are seascapes, sunsets and clouds. I've tried all 3 AF focus modes but none work consistently. I can get it to focus sometimes if point the camera at the ocean first. I've even tried manual focus but it won't focus to infinity. This camera is practically new, has never been dropped. Is this a known problem with this camera? Is it a settings problem (I've reset the camera to factory settings
... Olympus SP-550 UZ Digital Camera
I am trying to get my camera back to the factory settings but everytime i go menucardset then go tocustom reset setting it jumps over it and goes straight to picture mode. I cannot get it to highlight custom reset setting.
There may be another "reset" in the menu that will do what you want. Search for it. ... Olympus EVOLT E-500 Digital Camera
Yashica ez digital 6032- 6 mp camera.. i got one sparingly used yashica camera... with above spec... which shows trouble when taking stil pictures outdoors... indoor pictures and video indoors n outdoors are fine. but when taking stills outdoor mainly in daylight condtions... resulting pic is over exposed and blured...with white light...i tried adjsting the setting and i have reseted to factory settings... but the same problem remains...pls help me
Yashica ez digital 6032video indoors n outdoors are fine.but when taking stills outdoor mainly in daylight condtions...resulting pic is over exposed and blured...with white light...i triedadjst ... Digital Cameras
Factory reset. is there anyway i can set my camera to its factory settings?
Hold down menu button for 20sec ... Digital Cameras
Over exposure The exposure settings on the camera have suddenly become fixed - I can't change them either through fixing shutter speed, OEV, or any other settings. Even tried a factory reset by selecting 'initialize' from the menu, but the problem persists. High or low exposure settings are visible on the viewfinder (i.e. changing the settings shows the picture getting darker or lighter on the screen), but once the picture is shot, it's fixed at an overexposed state.
... Sony Cyber-Shot DSC-HX7V Digital Camera
My polariod t1035 camera has fully charged battery, reset to factory settings, and reformatted memory. but when i turn on the camera, the screen is just black, no picture, except when i look at the pictures on the camera. i have taken a picture, and it comes out just black. please help.
Unfortunately this faulty cant yoou fix it alone...why this is a ccd crash the ccd is faulty...you must change the ccd or the entire lens block... you must now see if you have convenience to adjust the camera, why it s possible that the fixing cost ... Polaroid i1035 Digital Camera
I can take digital photos that are on the sd card but I am not able to get my pc to download or reconise the Canon Powershot. I can not download photos! It used to go into download mode as soon as I plugged the camera inot the pc by using the digital port on back of camera and usb port on pc. What can I do. I have reset the camera setting back to factory with no success. I have Windows xp.
Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot S1 IS Digital Camera
I'm not sure what is relevant and what isn't but... Two days ago I tried taking a picture on my timer and all of them came out blurry. I wasn't sure why this was so I started poking around on the camera and decided to reset all factory settings. Then that evening I tried to upload my pictures to my computer as usual. The software (Picasa) locked up. I tried taking the camera out of the cradle and turning it on but it wouldn't turn on. I rebooted my computer and tried turing the camera on
Sometimes a camera software upgrade will help, but it is hard to find software online. I first would look on manufacture's website to see if there is any driver updates you can download to your pc, then do the same with picasa software. Also make sur ... Digital Cameras
The LCD went black, all the icons are showed, but no pictures. Any taken pictures are also black! Already reset the camera in factory settings, didn't help... anyone???
Unfortunately, I have the exact same problem and just got off the phone with Canon (1-800-828-4040 for tech support). According to their reps the S3IS is not on the list for replacement and I was quoted a min. fix price of $150.00. ... Canon PowerShot S3 IS Digital Camera
The viewfinder of my Nikon D80 is grayish and blurry when it's off. I cant see a thing when I tried to use my 18-135 mm lens. I don't have a battery to reset it to its factory default settings. Do you think there's something wrong with the camera or the viewfinder is always blurry and grayish when it's off. I have owned D40 earlier and I could play around with the viewfinder even when the camera was off.
Hi,\015\012There is chance that your settings are just off . Set your settings to AUTO and then try again to view in viewfinder .If you sre still unlucky then there is some problem in camera ,You need to take to service center to get it service ... Nikon Digital Cameras
HOW TO reset all the CAMERA settings back to factory settings
... Canon EOS 600D Rebel T3i Digital Camera
Casio Z-750 camera: The Select/set button has stopped working. Pulled and reset the battery and card. Still won't work. Can't do a full factory reset because the Set button won't respond. Any ideas??? Thanks
I hate to be the messenger of tough news, but this is probably either a switch problem or ribbon connector. Since resetting didn't help, it's going to be, in all liklihood, a hardware problem.\015\012The problem with the switch, is that it's ... Digital Cameras
I have new Nikon D90 with 18-105 Nikon lens. The only problem with the camera, when shooting potraits in dim light without flash, the pictures get black artefacts throughout the faces and skins. I used different lenses and reset the camera setting to the factory original, but no help. Thank you for solving the problem... Hamid Jakarta, Indonesia
This has nothing to do with the camera, but instead it has to do with the lens you are using. The standard lens you are using has an aperture of f/4.5 which is common across many lenses. If you wish to shoot in low light you need a lower "f-stop". ... Nikon D90 Digital Camera with 18-105mm lens
I have a Caonon 40D. I thought I was having a lens problem at first. However after using 2 other lenses I have found out it is my Camera. No matter how clear and crisp the image is in the view finder. After the photo is taken and loaded into PS4. The image is blurry and unsharp. I have reset all camera settings to factory with Canon. And I am still getting the same results. Any help would be appreciated. Thank you in advance.
It is probably due to dust on the sensor, or sensor alignment not properly done. In both cases you have to take the camera to a Canon dealer for servicing. ... Canon EOS 40D Digital Camera
Poor Resolution I have 3 cameras 2 canon 750 powershot and one olympus fe-230, I uploaded the photos to Shutterfly and all photos from the 3 cameras said poor resolution. I reset them to the factory settings and tried again, same response. what is going on?
E sure the quality setting is the highest - 7 megapixels. Otherwise, why buy a 7MP if you shoot at 3MP. The Canon 750 seems to have excellent picture quality where the Olympus has soft focusing (reviews at C-net). ... Canon PowerShot SD550 / IXUS 750 Digital Camera
My Pentax Optio A20 camera display doesn't show true colors, they now have a red-orange tint. It was dropped on the grass yesterday. When I play back the pictures, all of them show up as red-orange on the display, the ones I took before it was dropped and after it was dropped. Everything else works fine on the camera. My brother-in-law says that there may be a reset button to restore factory settings.
It sounds like you may have a broken display. It is possible that it is the main board, but much more likely that it is the LCD display. I can fix this for $40, not matter if it is the display, or the main board. Or you can send it to Pentax in A ... Pentax Optio A20 Digital Camera
I have a Kodak Z812IS and it is no longer taking photos properly. It doesn't allow me to focus or take more than one photo without turning the camera off and on or zooming in. I have reset to factory settings as well as trying all settings to no avail. any ideas??
... Digital Cameras
Camera problems How do I reset my Sony DSC-H2 camera to the original factory settings? I've pushed so many buttons it's all screwed up.
Go to camera Menu and select Initialize, this will Reset your camera to factory default settings. ... Sony Cyber-shot DSC-H2 Digital Camera
When I press the shutter button to capture a picture there is a flashing hand and an exclamation mark within a box. I cannot figure out how to adjust the settings correctly. How can I reset this camera or what are the factory settings suppose to be?
If you haven't a manual get onto the Sony site and try to find one there. You might strike lucky. ... Sony Cyber-shot DSC-H50 Digital Camera
I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.
... Panasonic Lumix DMC-FZ28 Digital Camera
Problem with my t1035 polaroid display screen camera. I charged battery, refomatted memory card, and reset camera to factory settings and it still blinks orange very quickly at start up then says "goodbye" and turns off without any error code or reason why it is turning off. Please help
Sorry this isn't a solution, but i have the same problem. have you solved the problem yet? ... Polaroid i1035 Digital Camera
I used to be able to take 1000+ pictures on external memory card. Now I'm trying to take pictures and it will only allow me to take 9 pictures but on the camera memory. I have reset the camera to factory settings and also purchased and inserted a new external memory card and I cant to taking pictures via the external memory card. Do you have any suggestions??
With no card in the camera, go into the menu and find "format"...follow the on-screen instructions to erase the internal memory. Then, insert your card and do the format thing again (This will erase your card so if there are pictures on it, download ... Olympus SP-565 UZ Digital Camera