Having problems with your Panasonic Lumix DMC-ZS3 Digital Camera ?

We have a Panasonic DMC ZS3 camera that has been working fine until now. We are on the North West coast of Costa Rica. When you turn the camera on, the lens, which was out when shut off, goes in, then comes back out. The camera screen tries to focus, then goes to a blank screen and says "SYSTEM ERROR (FOCUS). When you shut it off, the lens does not retract.


Answers :

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Panasonic Lumix DMC-ZS3 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We have a Panasonic DMC ZS3 camera that has been working fine until now. We are on the North West coast of Costa Rica. When you turn the camera on, the lens, which was out when shut off, goes in, then comes back out. The camera screen tries to focus, then goes to a blank screen and says "SYSTEM ERROR (FOCUS). When you shut it off, the lens does not retract.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-ZS3 Digital Camera

Focus camera will not focus, even sight screen is out of focus The camera will not focus. When switched on it beeps with a flashing green light near rthe view-finder and the lens housing extends. This repeats and the then the viewing screen goes blank. Pressing the AEL button will illuminate the viewing screen, but it is out of focus. Half depression of the shutter makes no difference. I had previously some intermittent operation of the zoom mechanism. The camera has not been dropped or jarred.


Your camera is having a problem positioning the lens unit, more than likely the cause is grit/dirt in mechanism, I recommend that you take the camera to a autorised service agent to have it stripped, cleaned and rebuilt. This is not really a repair t ... Olympus Camedia C-5060 Wide Zoom Digital Camera

EX-S500: * I turn it on and the 'Adjust' screen comes up. *I press the 'Menu' and the lens comes out, the green light flashes for awhile, it beeps a few times, it grinds a few times and shuts off. The lens stays out. *I turn it back on, the lens goes back in and the 'Adjust' screen comes on. * I press the power button and the camera goes off. *I left the camera in the charge gradle all night and the battery did not charge. *Help


You could have a power and lens issue, going on at the same time here. There's a couple of web blogs that delineate things you can try to correct these issues, and here they are:\015\012 ... Casio Exilim EX-S500 Digital Camera

Zooming FE-280 camera - Worked great for about 2 weeks. While on vacation developed a problem - when you turn the camera on the lens goes in and out like it is trying to focus. Once it is through with the lens action when you try to set up for a picture (any mode) and focus on the subject the camera will not focus and then shuts down. Acts like the battery is dead but camera shows fully charged battery. Any ideas?


The exactttt same thing happened to me. I think i still have a warranty on it, and every body has been trying to help me, but it seems the camera is just retarded- and just needs to be replaced ... Olympus FE-280 Digital Camera

Frozen Open I work at a movie store, and was taking pictures of some movies, and had some customers, so walked away from camera, it was still on and focus out. When i returned, the camera was off, but focus was still out. it's done that many times, and all i have to do is turn it back on and it will shut close. now, today i go to do the same thing, it wont even shut on. and when it does, the screen goes blue like normal and at the bottom of the screen it says E106 is this fixable?


I hate to post without offering a solution and while checking for a possible error code list for the camera, I ran across this:\015\012\015\012 ... HP Photosmart 735 Digital Camera

Ok so i am turning on my camera (an Fe-340) and the lens go in two or three times then when the screen finally does come on it is blurry and way out of focus, also when i attempt to adjust the zoom the camera turns itself off, if i attempt to turn the camera off using the power button it goes off but the lens does not retract.All other functions on the camera are operating correctly to my knowledge i can even take a blurry out of focus picture, view it in display mode or even transfer it to my c


It may be something more serious, but the problem you describe is\015\012frequently due to corrosion on the battery contacts inside the camera. \015\012Remove the batteries and wipe the camera contacts firmly with a clean\015\012cloth (heavy corrosio ... Olympus FE-340 Digital Camera

My camera suddenly stopped focusing. Also the lens in front jams slightly when the camera it turned on. When it is shut off the lens goes in, but then pops back out and goes in.


The battery is probably flat, recharge the battery and try it again ... Sony Cyber-shot DSC-W55 Digital Camera

My camera turns on and shuts off right away, the lens comes outand the screen does it's opening casio thing and the green light is flashing then all of a sudden the screen goes black and the lens goes back in, i fully charged the battery and still get the same thing happening!


... Casio Exilim Card EX-S100 Digital Camera

I have a Ploaroid iS2132 digital Camera. Every time I try and take a picture the screen goes black and the camera shuts off with the lens extended. I have to cycle the power button to get is to powe


... Polaroid I Digital Cameras

I have 2 pentax optio m20 cameras purchased at the same time. Both have developed the same problem: hit the on button and it tries to come on, but makes a funny sound, lens moves in and out trying to focus (screen is lit showing focus changing and green mode icon), then the camera shuts off and never gets into picture taking mode. I fixed one of the cameras once by pushing buttons after connecting and disconnecting from the computer (and the camera worked okay for several months), but repeate


Your previous diagnostic definitely\015\012 indicates a mechanical problem, once the possibility that a false \015\012sensor signal to the main board as the cause by resetting all functions.\015\012 It is very likely that ther ... Pentax Optio M20 Digital Camera

My Nikon Coolpix S203 has a "lens error". Every time I turn on the camera, then lens goes crazy, moving in and out and zooming in and out of focus, all the while making a beeping noise. It then retracts back into the camera and the message "Lens error." appears on the screen. Please, is there anything I can do to fix this? Thank you.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Nikon Coolpix S203 Digital Camera

Not focusing I'm not sure what happened, nothing seems to be obstructing and to my extent of knowledge nothing has happened to my camera. However when I turn it on the lens comes out once, goes back in, and comes out again. Then the screen is blank, shows no picture until i push the play button, or until I change what picture setting it is on. Once the screen shows picture it will not focus anything. Any help here?


Do you hear any unusual friction noise while the lens assembly projects out.. if so then the traction assembly of your zoom barrel has developed mechanical obstruction, in which case it has to be serviced. Take it to the service centre and the proble ... Olympus FE-230 Digital Camera

The camera shuts down soon after starting. Turn camera on green light flashes. Screen says reading internal or memory card. Reset time date excetra. Screen goes black. Lens does not retract.


Have same camera haen t had that prob sound s like weak batteries go into menu an dsee what its set at and reprogram it to what you want mine never came with the docking station try withou tand new batteries i use rechargable batteries with nicad ba ... Kodak EasyShare DX4330 Digital Camera

Stripes When I take my pictures pale yellow stripes appear across the screen. I changed the batteries, changed the card and nothing helps. My camera is not even a year old. when I take a photo there are light stripes across the image, somtimes if I wipe the screen it goes away but when I shut the camera,the next time I open it it happens agin! how can I fix this,is the lens sticky? or getting stuck? what can I do about it?


\015\012ol' ... Fuji FinePix F460 Digital Camera

Lens broken my camera fell off a table and now the lens is screwed up. when i turn it on it is just a black screen. but if i press firmly on the right side of the lens, the picture blurs, fuzzes, and then comes into focus, once i take my finger off it goes black. so i can take pictures, but only with my finger on the lens. it seems like this is fixable. what can i do?


Not easily fixed. Sounds like you stripped the feeds for the lense, and it messed up the contacts. Try sending it to Kodak for repair, or taking it to a camera repair place. These devices are sensitive electronics, so you won't be able to fix it at h ... Kodak EasyShare One Digital Camera

Lens problem turns on ok then lens goes out and in and out and in seeking focus it appears, then stops and screen says lens problem. it will then not do anything until shut off and on then it repeats the same thing. tried removing battery and putting it back, but no luck.


Try the procedures in this tip. ... Nikon COOLPIX L18 Digital Camera

When i turn on the camera my screen stays black and the lens goes in and out and then the camera shuts off. i have an olympus FE-3010 camera.


Hi,Please try to visit below linkOlympus Camera ... Olympus FE3010 Digital Camera

Canon ixus 09is Turn camera on - yellow light appears - camera makes noises like its ready to go - screen doesnt work and it takes a few goes to turn it off. Even when the lens eventually retracted and stayed shut the yellow light stays on and the camera got very hot


... Canon IXUS 90IS Digital Camera

Camera will not turn on completely. It starts to open the vackview screen, the lens pops out then it goes black and shuts down leaving lens out.


Your problem\015\012may be due to a weak/worn out battery or corrosion on the battery contacts inside the camera which can\015\012prevent the full power of the batteries from flowing into the camera.\015\012Try this free fix before you d ... Polaroid i531 Digital Camera

Black screen When i turn on the camera, it shows the Olympus logo then it goes to a black screen and the lens seems to focus then it beeps twice and then nothing.


... Olympus X940 Digital Camera

The screen on my M380 does not show the image. The camera is fully charged and when I press the "on" button, the lens extends and opens. The screen is illuminated, but there is no image of what the picture will be. I can go ahead and take a picture -- it makes the appropriate sounds as it normally would and the flash goes off if needed. In fact, when I then plug into the computer, I can see that a picture was taken. However you cannot focus the shot because you cannot see the image on the s


This can be a settings problem on your camera, so what we can try doing here first is to reset or restore the camera's settings to its default and then after doing that power off the camera and take the battery out for 5 minutes then put it back in a ... Digital Cameras

When you turn the camera on the lens goes back and forwards and eventually stays shut the cameras screen says switch off and turn on again


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-shot DSC-W200 Digital Camera

My Olympus SP-550UZ 18x optical zoom has a problem. I turn it on, and the lens starts coming out, but it get stuck, and the sounds is this clicking noise. Then on the screen it says ZOOM ERROR and red text. After the lens goes back in and the camera shuts off. I've had this problem for a while and I searched everywhere to fix it. Help!


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Olympus SP-550 UZ Digital Camera

When i turn on the olympus t100 camera my screen stays black and the lens goes in and out and then the camera shuts off.


... Digital Cameras

When camera is on it only stays on for a few minutes then the screen goes black but the lens does not go back in like when it's shut off, I'm unable to take pictures when the screen is black.


Faulty or dead battery. ... Kodak Easyshare CD82 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4144 seconds