Having problems with your Panasonic Lumix FP1 Digital Camera ?

Camera coming up with system error zoom when turned on then turning off


Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair \012center for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope\012 \012the advise is useful. please do not hesitate to let me know if you need \012any further assistance. Also, please be so kind to let me know if you \012found this helpful.

Regards
Andrea
Repair Help & Product Troubleshooting for Panasonic Lumix FP1 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Upon trying to turn camera Panasonic DMC-ZS3 on, error message appears: system error (zoom). The lens comes out a bit and then goes back in, shutter closes, then lens comes out a bit again, then goes back in again ... then error message. Can you help? Thanks!


I don't know that I can help you fix it, but I can try.\012Here are my thoughts...\012Check the battery first. If it's like a normal battery, like AA or AAA batteries, replace them and try turning it on.\012\012If it's a flat lithium battery t ... Panasonic Lumix DMC-ZS3 Digital Camera

I have a sp-560uz and when i turn on my camera, zoom error comes on and my camera turns off. I put brand new batteries and it worked for a while then zoom error comes on. i put some more batteries took a picture, turned it off and when i put it back on zoom error came back on.


Try the procedures in this tip. ... Olympus Digital Cameras

Zoom problem The camera I have don't allow the zoom to come out, when I turn camera on it says "zoom error" and then I can't do nothing on camera,not even look at pics I have taken. It does it alot, sometimes the camera will turn on without saying it,but it's very rare. And sometimes I can turn it on and it will say "zoom error" but if I press zoom in the camera will work. But it's very rare that it works. I love the camera and hope there is a solution.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Zoom DualCam 1300 (1599) Digital Camera

Camera coming up with system error zoom when turned on then turning off


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed ... Panasonic Lumix FP1 Digital Camera

System error turn camera on green light comes on as per normal functions ok to that point then lens retracts like it is switching off green light comes on and flashes with system error.if you hold the camera to your ear when all this is going on you can hear noise from within the camera before it starts to retract and green light starts to flash with system error on screen.this happens on all functions.you can still look at pictures already taken this funtion works ok.just can,t take photos any


Hi\015\012the problem that causing this is:\015\012there is some pressure to the lens\015\012\015\012did it fell?\015\012probebly there is a fault in the lens \015\012\015\012sorry cant help\015\012\015\012good luck ... Panasonic Lumix DMC-LC43 Digital Camera

System Error I downloaded the pictures onto a CD from my Konica Minolta today like I always do. When I was finished I went onto the camera to delete the pictures and format the card - like I always do. (I have had this camera for right at 1 year) When I turn the switch to the "view" mode it comes up with "system error" within about 2 seconds and the whole camera turns off. If I go really fast I can delete one picture at a time. I can still take pictures and they still show up (for 2 seconds).


Same thing happend to my father's camera (memory card). Seems that deleting the pictures from the card via the computer solves the problem. Corrupt files on the card cause the camera to read system error. No corrupt files = working camera! :) ... Konica Minolta DiMAGE Z5 Digital Camera

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

Zoom ERROR When I turn my Camera on it comes up saying Zoom Error. I can't Zoom in or out - and all I can see is a black screen. Last time I used it - I took a picture and put it bck in my bag - when I pulled it out again the error msg came up. It has happened once before and I reset the camera through the menu and the msg went away and the camera went bck to normal so when it happened again I press reset but this time it hasn't made a difference. Any suggestions?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a pro ... Fuji FinePix A820 Digital Camera

Just purchased an powershot SX1 IS. I took one photo, zoomed in on it to see how clear the zoom was once taken a photo. THen it switched itself of with the lens still out. Now when turning it on it has a black screen and say lens error...restart camera. I have tried holding func. when turning on the camera and the time comes up on the screen. But as soon as I let go of func I get the error msg.


Hello if you just purchased this unit Then i advise you to take it back, this sounds like a system control issue or main board problem. Holding the function key while turning is factory reset, if this is not working right them the camera has a bad sy ... Canon PowerShot SX1 IS Digital Camera

When turning off the camera, the lens does not retract. I also get an error message "SYSTEM ERROR (ZOOM)" and another one "PLEASE TURN THE CAMERA OFF AND THEN ON". Once the camera is turned on, I can hear the lens mechanism working, but obviously failing.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic DMC-FX37 Digital Camera

System error My camera comes up with a system error and does not take pictures. The lens does go in and out when top dial turned to scene but stays out when power button turned to off and then displays system error... I have tried removing card and battery ...any ideas apart from trashing it? Tony


Go to your camera settings and reset what you can, especially the date and time. Take the batteries out if they are old and leave them out over night. Then turn it on and see if the message is gone. If not, then you may need to get service for it ... Digital Cameras

When i turn on my camera it zooms in and out over and over never focusing and then displays the message ''PLEASE TURN CAMERA OFF AND THEN ON AGAIN''. When i do this it repeats the smae thing evey time i turn the camera on. AND IT HAS THE ERRORS SYSTEM ERROR FOCUS


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic Lumix DMC-FX7 Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work. hi expert i m suffring in this error on my panasonic DMC-LC33 when i switched on


Try \015\012\015\012Klomtrix trick this worked with my camera\015\012thanks klomtrix ... Panasonic Lumix DMC-LC33 Digital Camera

At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retracts and the camera terns off. i tried to connect with computer and scan for virous, but, when i connect the USB and turn on the camera, the lense retract and tourn off the camera indicating system error 0030.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... BenQ DC E610 Digital Camera

At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retracts and the camera terns off. i tried to connect with computer and scan for virous, but, when i connect the USB and turn on the camera, the lense retract and tourn off the camera indicating system error 0030.


Hi and welcome to FixYa,Initially, a few ideas you may want to consider:\015\012\015\012ensure that both the built-in 13Mb and the SD memory card are formatted through the camera's features/options ... Digital Cameras

When I turn my camera on, the zoom does not come out, a "zoom error" appear on the display and the camera turns off by itself. I do not drop or knock it and the batteries are new. thank you for your help! Jack


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a professional.Use\015\012\015\012\ ... Digital Cameras

When ever I try to use the zoom button I get a message saying system error (zoom) I have also gotten a message that says Please turn off camera and turn on again... What is going on with my camera and what needs to happen to get it fixed!


When you first switch on the camera the lens will motor forward?\015\012\015\012If it does so then either the zoom control button is faulty or the control pcb \015\012\015\012If the lens does not move on first switch on then i ... Panasonic Lumix DMC-FZ28 Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work.


*&%$@#%^&*&^% !!"It's working!!!!\015\012\015\012Turn your camera on and put it near your ear. Did you hear a softly motorized sound in the lenses area and the green LED is flashing? If you hear this sound do this.\015\012\015\012Do it under your own ... Panasonic Lumix DMC-LC33 Digital Camera

Lens error, restart camera telephoto lens is stuck in zoom position and won't retract, so when i turn on camera, screens says "lens error, restart camera", but it won't restart...just keep coming up with same error message


Hello mnickoliThis is a fairly common error especially with the A560.This either means that something is jamming the lens , or that the\015\012lens sensor is faulty. This is a very , if not the most common problem\015\012with modern digit ... Canon PowerShot A560 Digital Camera

PANASONIC - fmc-fs5 When I turn the camera on, it comes up and then says "Please turn camera off and then on again". Looks like it is trying to recover from an internal error. Maybe I can reset the camera's computer? It also is doing a focus back and forth thing like it's zooming back and forth.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Panasonic Lumix DMC-FS5 Digital Camera

The zoom won't come out when I try to turn my camera on, it just turns a little bit, then turns back to the original place, and the screen says zoom error. I've tried different batteries, and taking out the memory card and putting it back in. The model is FujiFilm; FinePix A400. What should I do?


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Digital Cameras

When I turn the camera on in either record or review mode I get a system error: zoom message after a few seconds and the camera is inoperable. Then when I turn the camera off the lens does not retract.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by ... Panasonic Lumix DMC-FZ28 Digital Camera

Zoom error When I turn my camera on it displays "zoom error" and the zoom lens does not come out automatically. I'm in Papua New Guinea and have no access to any repair shop. Is there anything I can do to fix it.


Turn Camera off remove batteries for a few moments. Re insert batteries. Turn on will reset itself. Ensure you use correct focus settings as per instructions. If you dont use correct settings this problem will reoccur. ... Fuji FinePix S1000FD Digital Camera

Zoom error The main problem with my camera is that whem turn on, the lens will not come out to zoom the focus; and in the LCD it indicates zoom error.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Fuji FinePix A330 Digital Camera

My camera felt in the sand, so only tiny particles entered to the eye. The zoom does not work when it is on, there is not a clear image. when I turn on the camera. its lens protection does not opens and a message appears saying that there is a system error (zoom) . What can I do to fix it ands not buy another camera.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-FS6 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7079 seconds