Having problems with your Pentax Digital Cameras ?

Hi, My pentax optio WP don't work anymore. When i switch it on, it stops after 5 seconds. If i start it in read mode (blue button pressed whil i switch it on), it works, but the menu button dont't work and displays a yellow lock on the top of the screen. If i switch it on with the menu btton pressed, it displays ver 1.00 before to stop after 5 seconds If i switch it on with the menu and the blue btton pressed, it displays ver 36, then xxx test xxx and v 866-76 , 1.0001 before to stop after 5 sec


Answers :

Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.
If this is not the issue, please describe specifically which buttons are not workin...

thank u rate me!!

Repair Help & Product Troubleshooting for Pentax Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi, My pentax optio WP don't work anymore. When i switch it on, it stops after 5 seconds. If i start it in read mode (blue button pressed whil i switch it on), it works, but the menu button dont't work and displays a yellow lock on the top of the screen. If i switch it on with the menu btton pressed, it displays ver 1.00 before to stop after 5 seconds If i switch it on with the menu and the blue btton pressed, it displays ver 36, then xxx test xxx and v 866-76 , 1.0001 before to stop after 5 sec


Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.If this is not the issue, please describe specifically which buttons are not workin. ... Pentax Digital Cameras

My Pentax Optio M60 lens seems to be frozen half way out of the camera with the lens cover also partially open. When I turn in onn it sounds like the lens is trying to focus then turns intself off. Nothing is written on the screen unless I also press the menu button which displays VER 1.00 before bleeping three times and turning off or the green button which displays VER 0163A SBM -FIRM before beeping 3 times and swithcing off. Nothing else seem to do anything. I havn't dropped it or got the cam


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will hav ... Pentax Optio M60 Digital Camera

Canon s2IS when I turn the camera on in review mode the LCD screen displays pictures one after another. Cannot stop the picture review except to turn off the camera. In camera mode the menu button and other buttons do not function. The problem occurred while I was pressing and holding down the LCD review button and viewing hundreds of time-laps pictures I had taken with the camera.


Hello,\015\012Please do the followings.\015\012\015\0121. Turn off the camera.\015\0122. Remove the memory card.\015\0123. Remove the batteries.\015\0124. Wait at least 3-5 minutes.\015\0125. Place the memory ... Canon PowerShot S2 IS Digital Camera

White screen? My camera has suddenly stopped working. When I press the red 'shoot' or green 'review' button, all I get on the display is a white screen. Pressing the shutter button does make it shoot, and the zoom and the flash work. I have just taken the card out and examined the jpg files - it is still taking pictures. So it's the display that is busted. I guess my question is: Is it worth the repair bill to get it fixed?


If you cannot find a solution to your problem you may want to email [email protected] He has good advice and good used parts at a fair price. ... Casio EXILIM ZOOM EX-Z850 Digital Camera

Hi my camera as the lens stuck it makes an error sound of 2 beeps followed by 3 beeps if i press and hold the on button and then press the on button it makes the first 2 beeps lights the lcd screen where you ca read ver. 1.02 and switches of with the 3 beep error and switches back off. any idea??? thanks in advance


Try the procedures in this tip. ... Casio Exilim EX-Z30 Digital Camera

Hard reset of Nikon s8100? My menu button isn't working at all. The only one that is working is the round scene-selector button on top...and even that one stops working after I press the shutter button (which doesn't respond either). I've tried removing the battery for a few hours and replacing it, but that didn't help. Is there a way to remove the backup battery as well? Is there a button or a trick to doing a "hard reset" without having to use the menu??


... Nikon S8100 Digital Camera

Hard reset of Nikon s8100? My menu button isn't working at all. The only one that is working is the round scene-selector button on top...and even that one stops working after I press the shutter button (which doesn't respond either). I've tried removing the battery for a few hours and replacing it, but that didn't help. Is there a way to remove the backup battery as well? Is there a button or a trick to doing a "hard reset" without having to use the menu??


The symptoms indicate your main battery is failing. Either is not charged or is failing to take a charge. ... Nikon S8100 Digital Camera

I connect my interface cable to the usb & to the digital terminal & turn the camera on & a red light (not blue) appears beneath the menu button. no menu appears, even if i press the menu button. how do i transfer images? canon powershot sx 10 is


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Canon Digital Cameras

I have some problems with my new G11. During first photo walking after 2 ours of working I met problem with system. When I use any button (except shutter) on screen appears menu of light lamp and active area blinking back and forward, I can't stop it. When I open viewer to see my photos then after use any button it started to scroll trough all pictures in memory and I also can't stop it. help to stop it is only to switch off camera or use shutter. Could you help??


Have you really spent any time reading the owner's manual? ... Canon PowerShot G11 Digital Camera

CAM YOU HAVE TO FORMAT THE CARD. HERE'S SOME STEPS TO FORMAT THE CARD: In Playback mode, select the image you want to delete, then press OK to display the Playback menu. Select the Delete option and press OK. In the Delete sub-menu, use the buttons to highlight the option you want, and then press OK.These options include: Format Memory (Card)?Deletes all of the images, video clips, and files from internal memory or the memory card, and then formats the internal memory or memory card. A sc


Great! Thanks.. ... HP Photosmart M425 Digital Camera

Green light on camera back to the right of the 'delete' button continually flashes on-off about 1 second intervals as soon as battery is inserted as long as CF card is in place. Switching camera ON produces no visible operational indicators. Depressing "Menu" button flashes: hour glass; menu display; blank screen. Holding button down just cycles as above. Swapped lens, data card, battery, connected EH-5 power source; nothing makes any difference. Checked same lens in another D70 camera; it's OK.


I would start by looking into the memory card slot to see if you have a bent pin. You may need a small light and a magnifying glass to see them. If the pins are okay, then you can try a reset by holding down the BKT and metering buttons toget ... Nikon D70s Digital Camera with 18-200mm lens

Hi. I am on vacation in the Indian Ocean islands at this moment with a brand new Nikon D90 + 18-105 lens. Was taking photos this morning. From one shot to another, the camera suddenly stopped working. When I press the shutter button, it still focuses and when I click through, I can hear the shutter clicking (tried this with different shutter speeds). However, no photo is captured/stored. Also, the Lv button no longer works. When I press it, the camera is unable to switch from viewfinder to LCD l


If you happen to have a hair dryer with you please use it to take off possible moisture from the camera, warm the camera and keep repeating it , do not over use but just to make sure that exposure to mist could have caused condensation within.\ ... Nikon D90 Digital Camera with 18-105mm lens

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

Panasonic NV-DS27EG problem: sudden degradation in function following (though could be coincidence) first ever use of DV-out socket on camera (to connect Dv-in on Panasonic DVD recorder). First symptom: no picture displayed when attempting to play back a tape in VCR mode. Second symptom: power light stayed on even when camera switch was at the off position. Third symptom: message in viewfinder asking for the reset button to be pressed. Found and pressed reset button then: Fourth symptom: "to ser


... Panasonic Digital Cameras

Casio EX-Z70-Camra switches on,green light flashes for 5 seconds then camera switches off.Can push green view button and view photos and alter menu but as soon as i press the red button to takr a photo the camera swithes off!!


... Casio EXILIM ZOOM EX-Z70 Digital Camera

My camera taks picture but i cant see them on display..the display is black but when i press the menu button i can see the menu..do i have a problem with the lenss?


Hi, I have the same issue with this camera and Fuji suggested that it could be the sensor fault. Strange to see that you had my same problem at the same date of mine. Did you get a solution or managed to see if there is a Sensor recal like for many o ... Fuji FinePix A820 Digital Camera

When turning on my Panasonic Hx-DC1 camcorder there is no Menu. Pressing the 'Menu' button does not display the menu options.


It's likely the ribbon cable on the main board is dislodge, you need to take the whole unit apart, if your carefull its not to bad to disassemble, you need to take out the side panel, under the power board, the one with a big black capacitor, you nee ... Digital Cameras

When I press the review button for my camera, all my pictures are being fast forward. Also, my Menu button and Display button don't seem to work either. But my camera still takes the pictures


Sounds like the buttons are physically broken. See if the manufacturer is able to replace the buttons. ... Sony Cyber-shot DSC-S600 Digital Camera

Have a 20 month Optio E 40, today tried to switch on, lens woundnt come out, used the manual and switched on while holding arrow button, Playback piture showed in display, pressed half shutter to switch back and error message Lens error 113,0,0,0 appeared, Pentax want £80.00 minimum to look at it, can you help pleaseregards Terry


Try to take out the battery and put it back in. ... Digital Cameras

The lense is not coming out and no display. Following id the camera condition: 1. Battery is new 2. Camera is switched on 3. Mode is camera (NOT view) 4. Pressed button "display"


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A520 Digital Camera

I have a minolta maxxum 7000 camera that will not trigger (snap the shutter.I've tryed 3 other lenses but it does the same with different lenses.It will auto focus when the shutter release button is pressed half way as it should and the specs show in the display area through the eye view.But when the shutter is pressed all the way down nothing happens.All the specs go away too(iso,f stop,film count etc).Any ideas?


Could also be minor corrosion in the battery compartment, that won't let the shutter current pass. I had that problem once. ... Digital Cameras

No menu display when pressing menu button


START SIMPLE, ARE THE BATTERIES FRESH? WAS THE CAMERA WORKING BEFORE THIS ERROR? HAVE YOU DONE A POWER UP, POWER DOWN RESET MODE? DID THAT DO ANYTHING? DID THE CAMERA SIT FOR A LONG TIME IDLE WITH THE BATTERIES IN IT? DO ANY OTHER FUNCTIONS WORK? I H ... Sony Cyber-shot DSC-W50 Digital Camera

Sony DSC-R1 N50 MKM 4552350 Upon switch the camera makes a crackling noise and the LCD screen as well as the view finder has noise bars. The noise bars are like vertical confetti bars about 5mm wide and almost full height, and there is about three of them. Pressing the menu button shows the menu clearly but upon playing back photos from CF Memory card or Memory stick the camera turn's it's self off. The crackling noise is usually present only for about the first few few seconds. H


... Sony Cyber-Shot DSC-R1 Digital Camera

LCD Display I haven't used my canon for a while - I've just turned it on and though the LCD display works to show pictures I've taken and the settings screen - I can't see anything in it when I take a picture (it's just black) when I press the Disp button it just switches from a black screen to the settings screen - please tell me what I can do so that I can see the image in the LCD before I take the picure. Thanks for your help


As far as I am aware, the 400D doesn't have a live preview mode.What you are describing is perfectly normal and is how 99% of digital SLR cameras behave.Are you sure it used to do this?Matt ... Canon EOS 400D / Rebel XTi Digital Camera

The LCD screen only switches ON in C(Custom) Mode and tansfers to Viewfinder in other Modes.In display Images mode it regains to the LCD screen but as soon as the click button is pressed it again switches over to the Viewfinder I have tried with the Power Saving options and the Custom Settings with no fruuitful result. Please kindly help me in sorting out this problem


Try pushing the disp. or display button. I hope this helps! Please rate my answer. ... Canon PowerShot A570 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1715 seconds